Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
The range in which you can use digital zoom without image deterioration is indicated on the display. The deterioration point depends on the image size. Image Size Undeteriorated zoom limit 8M 3X 3:2 3X 16:9 3X 6M 3.5X 4M 4.2X 2M 6.1X VGA 15.1X Snapshot Tutorial 44 Recording Movie Images and Audio To record a movie 1. Configure the quality setting for the movie (page 69). The length of the movie you can record will depend on the quality setting you select. 2. In the REC mode, press [0] (Movie). Remaining recording time This will start recording and display Y on the monitor screen. Movie recording includes monaural audio. 3. Press [0] again to stop recording. Movie recording also will stop automatically if memory becomes full before you press [0]. • The maximum size allowed for a single movie file is 4 GB. Movie recording stops automatically when a file becomes 4GB. Shooting with BEST SHOT With BEST SHOT (page 50), you can select the sample scene that matches the type of movie you are trying to shoot and the camera will change its setup accordingly, for beautiful movies every time. Selecting the BEST SHOT scene named Night Scene, for example, will configure the camera so night scenes appear clearer and brighter. Minimizing the Effects of Camera Movement during Movie Recording You can configure the camera to minimize the effects of camera movement during movie recording (page 64). Note, however, that this does not prevent image blur due to subject movement and it makes the field of view narrower. Recording time Recording Movie Images and Audio 45 NOTE • Spending a long time using movie recording will cause the camera to become slightly warm to the touch. This is normal and does not indicate malfunction. • The camera also records audio. Note the following points when shooting a movie. – Take care that the microphone is not blocked by your fingers, etc. – Good recording results are not possible when the camera is too far away from what you are trying to record. – Operating camera buttons while shooting can cause button noise to be picked up in the audio. Microphone • Shooting a very bright subject can cause a vertical band to appear in the monitor screen image. This does not indicate malfunction. The band will not be recorded in a snapshot, but will be recorded in the case of a movie. • Use of certain types of memory cards increase the time it takes to record movies, which can cause movie frames to be lost. This condition is indicated by » and Y flashing on the monitor screen. To avoid loss of movie frames, use of a memory card with a maximum transfer speed of at least 10MB per second is recommended. • Only digital zoom can be used for zooming during movie recording. Since optical zoom is not possible while recording a movie, zoom as required before pressing [0] to start recording. • The effects of camera movement in an image become more pronounced when you shoot close up or with a large zoom factor. Because of this, use of a tripod is recommended under these conditions. • Auto Focus and Macro Focus become fixed focus while shooting a movie (page 58). Recording Movie Images and Audio 46 Using Prerecord Movie Using Prerecord Movie With this feature, the camera prerecords up to five seconds of whatever is happening in front of the lens in a buffer that is continually updated. Pressing [0] saves the prerecorded action (buffer contents) followed by real-time recording. Real-time recording continues until you stop it. [0] [0] Movie Recording start Recording end 5-second prerecorded part (from the buffer) . To set up the camera to shoot with Prerecord Movie 1. In the REC mode, press [BS]. 2. Use [8], [2], [4], and [6] to select the “Prerecord (Movie)” scene and then press [SET]. This causes ‰ to appear on the monitor screen. . To shoot a Prerecord Movie 1. With the camera pointed at the subject, press [0]. This will save five seconds of action prerecorded in the buffer and start real-time recording. 2. Press [0] again to stop recording. • To turn off Prerecord Movie, press [BS] and then select R (Auto). Recording Movie Images and Audio 47 Shooting a Snapshot while Shooting a Movie Shooting a Snapshot while Shooting a Movie 1. While a movie is being recorded, press the shutter button. Movie recording continues after the snapshot is recorded. NOTE • You can use [2] ( ) while shooting a movie to change the flash mode setting. • Move recording is interrupted for a few seconds at the point where a snapshot is recorded. • Shooting a snapshot during movie recording is not possible while any one of the following BEST SHOT scenes is selected. Prerecord (Movie), White board, etc., For YouTube, Voice Recording Recording Audio Only (Voice Recording) Voice Recording lets you record audio only, without a snapshot or movie. You can record about 38 minutes and 33 seconds of Voice Recording using the camera’s built-in memory only. 1. In the REC mode, press [BS]. 2. Use [8], [2], [4], and [6] to select the “Voice Recording” scene and t...