Évaluations - 3, GPA: 4.7
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Press [SET] to exit the setting screen. To configure World Time settings 1. Press [MENU]. 2. Select the “Set Up” tab, select “World Time”, and then press []. 3. Use [] and [] to select “World”, and then press []. 4. Use [] and [] to select “City”, and then press []. • To configure the summer time setting, select “DST”, and then select either “On” or “Off”. • Summer time is used in some geographical areas to advance the current time setting by one hour during the summer months. • Use of summer time depends on the local customs and laws. 141 OTHER SETTINGS Changing the Display Language 5. Use [], [], [], and [] to select the geographical area you want, and then press [SET]. 6. Use [] and [] to select the city you want, and then press [SET]. 7. When the setting is the way you want, press [SET] to apply it and exit the setting screen. You can use the following procedure to select one of ten languages as the display language. 1. Press [MENU]. 2. Select the “Set Up” tab, select “Language”, and then press []. 3. Use [], [], [], and [] to change the setting, and then press [SET]. 142 OTHER SETTINGS Changing the USB Port Protocol You can use the procedure below to change the communication protocol of the camera’s USB port when connecting to a computer, printer, or other external device. Select the protocol that suits the device to which you are connecting. 1. Press [MENU]. 2. Select the “Set Up” tab, select “USB”, and then press []. 3. Use [] and [] to select the setting you want, and then press [SET]. When connecting to this type of device: Select this setting: Computer or USB DIRECTPRINT- compatible printer (page 156) Mass Storage (USB DIRECT-PRINT) PictBridge-compatible printer (page 156) PTP (PictBridge)* * “PTP” stands for “Picture Transfer Protocol”. • Mass Storage (USB DIRECT-PRINT) causes the camera to see the computer as an external storage device. Use this setting for normal transfer of images from the camera to a computer (using the bundled Photo Loader application). • PTP (PictBridge) simplifies the transfer of image data to the connected device. 143 OTHER SETTINGS Configuring [ ] (REC) and [ ] (PLAY) Power On/Off Functions You can use the following procedures to configure the [ ] (REC) and [ ] (PLAY) so power turns and/or off whenever they are pressed. 1. Press [MENU]. 2. Select the “Set Up” tab, select “REC/PLAY”, and then press []. 3. Use [] and [] to select the setting you want, and then press [SET]. To configure this operation: Select this setting: Power turns on when [ ] (REC) or [ ] (PLAY) is pressed (but does not turn off) Power On Power turns on or off when [ ] (REC) or [ ] (PLAY) is pressed Power On/Off Power does not turn on or off when [ ] (REC) or [ ] (PLAY) is pressedDisable IMPORTANT! • When “Power On/Off” is selected, pressing [ ] (REC) in a REC mode or [ ] (PLAY) in the PLAY mode turns off the camera. • Pressing [ ] (REC) in the PLAY mode switches to the currently selected recording mode, and pressing [ ] (PLAY) in a REC mode switches to the PLAY mode. NOTE • The initial default setting is “Power On”. 144 OTHER SETTINGS Formatting Built-in Memory Formatting built-in memory deletes any data stored in it. IMPORTANT! • Note that data deleted by a format operation cannot be recovered. Check to make sure you do not need any of the data in memory before you format it. • Formatting built-in memory deletes the following. — Protected images — FAVORITE folder images — BESTSHOT mode user setups — Startup screen image — Power down image 1. Check to make sure there is no memory card loaded in the camera. • If there is a memory card loaded in the camera, remove it (page 148). 2. Press [MENU]. 3. Select the “Set Up” tab, select “Format”, and then press []. 4. Use [] and [] to select “Format”, and then press [SET]. • To exit the format operation without formatting, select “Cancel”. 145 USING A MEMORY CARD You can expand the storage capabilities of your camera by using a commercially available memory card (SD memory card or MultiMediaCard). You can also copy files from built-in flash memory to a memory card and from a memory card to flash memory. • Normally, files are stored in built-in flash memory. When you insert a memory card, however, the camera automatically stores files to the card. • Note that you cannot save files to built-in memory while a memory card is installed in the camera. IMPORTANT! • Use only an SD memory card or a MultiMediaCard with this camera. Proper operation is not guaranteed when any other type of card is used. • See the instructions that come with the memory card for information about how to use it. • Certain types of cards can slow down processing speeds. • SD memory cards have a write protect switch, which you can use to protect against accidental deletion of image data. Note, however, if you write protect an SD memory card, you must remove write protection whenever you want to record to it, format it, or delete any of its files. • Electrostatic charge, digital noise, and othe...