Évaluations - 4, GPA: 3.5
(
)
)
|
Facilité d'utilisation
1. In the REC mode, slide the zoom controller to zoom. w Wide Angle z Telephoto Zoom controller w (Wide Angle) : Reduces the size of the subject and broadens the range. z (Telephoto) : Enlarges the subject and narrows the range. 2. Press the shutter button to shoot the image. NOTE • Use of a tripod is recommended to protect against image blur due to camera movement when shooting with telephoto. • Performing a zoom operation changes the lens aperture. • Except for High Speed Movie, zoom operations are supported during movie recording. Zoom operations are disabled during high speed movie recording. To use optical zoom, perform the zoom operation before you press [0] (Movie) to start recording. • Zoom operations are not supporting during Slide Panorama shooting. The zoom setting is fixed at full wide angle. Snapshot Tutorial 42 Interpreting the Zoom Bar Interpreting the Zoom Bar During a zoom operation, a zoom bar appears on the monitor screen to show the current zoom setting. Range where image deterioration is suppressed. (optical zoom, HD Zoom, Deteriorated image range Single SR Zoom, Multi SR Zoom) (digital zoom) 1X 28.0X to 111.6X Zoom pointer Optical zoom limit point (Indicates current zoom.) • 7X optical zoom point Point from which image deteriorates • The point from which image deteriorates depends on the image size and on the “Zoom (SR)” setting. Zoom (SR) Setting Point from which image deteriorates Off 7.0X to 43.7X Single (Single SR Zoom) 10.5X to 65.6X Multi SR Zoom (HS BEST SHOT scene) 14.0X to 79.7X Snapshot Tutorial 43 . Zoom Icon The appearance of the zoom icon on the monitor screen depends on the zoom factor. Optical zoom Not displayed HD Zoom Not displayed Single SR Zoom c (White) Multi SR Zoom (Orange) Digital zoom e, e+c (White) or e+ (Orange) . Zoom Factor The digital zoom factor depends on the image size (page 34), the super resolution zoom setting, and on whether or not the “Multi SR Zoom” HS BEST SHOT scene is selected (page 72). Multi SR Zoom is enabled by selecting the “Multi SR Zoom” HS BEST SHOT scene. Image size Maximum zoom factor where image deterioration can be suppressed Total maximum zoom factor Zoom (SR): Off Zoom (SR): Single Multi SR Zoom Zoom (SR): Off Zoom (SR): Single Multi SR Zoom 12M 7.0X 10.5X – 28.0X 42.0X – 3:2 7.0X 10.5X – 28.0X 42.0X – 16:9 7.0X 10.5X – 28.0X 42.0X – 10M 7.7X – 14.0X 30.7X – 56.0X 8M 8.6X 12.9X 15.6X 34.3X 51.4X 62.4X 5M 10.9X 16.4X 20.0X 43.7X 65.5X 79.7X 3M 13.7X 20.5X 24.9X 54.6X 81.9X 99.5X VGA 43.7X 65.6X 79.7X 111.6X 111.6X 111.6X Snapshot Tutorial 44 Zooming with Super Resolution (Zoom (SR)) Zooming with Super Resolution (Zoom (SR)) There are two types of Super Resolution Zoom: Single SR Zoom and Multi SR Zoom. Single SR Zoom uses super resolution to expand the zoom range in which image quality deterioration is minimized. Multi SR Zoom shoots a series of High Speed CS images, which are then combined into final image to suppress image quality deterioration across a range that is greater than Single SR Zoom. For information about the effective zoom factor ranges in which Super Resolution Zoom is effective, see page 44. The procedure below shows how to configure Single SR Zoom settings. For information about Multi SR Zoom, see page 72. 1. In the REC mode, press [MENU]. 2. Use [4] and [6] to select the “REC” tab. 3. Use [8] and [2] to select “Zoom (SR)” and then press [6]. 4. Use [8] and [2] to select “Single” and then press [SET]. NOTE • Single SR Zoom is effective when you want to capture delicate textures. • Single SR Zoom does not work during movie recording. • The following functions are disabled when shooting with Single SR Zoom. Triple Self-timer, some BEST SHOT scenes Snapshot Tutorial B 45 Using Continuous Shutter Using Continuous Shutter To shoot with Continuous Shutter, press O (Continuous Shutter) and then select the “High Speed CS” scene. Note that the “High Speed CS” HS BEST SHOT scene has two modes: a High Speed CS mode and an F CS mode. O (Continuous Shutter) NOTE • To return from the “High Speed CS” HS BEST SHOT scene to the Single Shot mode, press [AUTO]. Using High Speed CS and Prerecord CS With High Speed CS, you can configure the camera to shoot at a speed of 3, 5, 10, 15, 30, or 40 images per second, as long as you keep the shutter button and there is memory available to store the images. With Prerecord CS, half-pressing the shutter button starts continual pre-recording of images to a temporary buffer. Then when you press the shutter button the rest of the way down, the camera stores what is currently in the buffer and starts real-time continuous shutter recording of new images. Real- time recording continues until you release the shutter button or until a total of up to 30 images (buffer images plus new images) are recorded. You can configure Prerecord CS to specify how many of the 30 images are recorded in the buffer and how many are recorded after you fully press the shutter button. Use Prerecord CS when you want to make...