Évaluations - 2, GPA: 4
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
C When the Monitor Has Turned Off to Save Power • When the camera is in standby mode, the power-on lamp flashes. • If no operations are performed for approximately another three minutes, the camera will turn off automatically. • When the power-on lamp is flashing, pressing any of the following buttons will turn the monitor back on: Power switch, shutter-release button, A button, cbutton, or b(e movie-record) button C Notes About Auto Off • The time that passes before the camera enters standby mode is fixed in the following situations: -When a menu is displayed: 3 minutes -During slide show playback: Up to 30 minutes -When the AC adapter EH-62F is connected: 30 minutes • The camera does not enter standby mode when transferring images using an Eye-Fi card. Reference Section E76 The Setup Menu Format Memory/Format Card Press the d button Mz tab M Format memory/Format card Use this option to format the internal memory or a memory card. Formatting the internal memory or memory cards permanently deletes all data. Data that has been deleted cannot be restored. Be sure to transfer important images to a computer before formatting. Formatting the Internal Memory To format the internal memory, remove the memory card from the camera. The Format memory option is displayed in the setup menu. No Format memory All images will be deleted! OK? Format Formatting Memory Cards When a memory card is inserted in the camera, the Format card option is displayed in the setup menu. Reference Section No Format card All images will be deleted! OK? Format B Notes About Formatting Internal Memory and Memory Cards • Album icon settings (E9) are reset to their default settings (number icons) when the internal memory or memory card is formatted. • Do not turn the camera off or open the battery-chamber/memory card slot cover during formatting. • The first time you insert a memory card that has been used in another device into this camera, be sure to format it with this camera. E77 The Setup Menu Language Press the d button Mz tab M Language Select one of 29 languages for display of camera menus and messages. Czech Danish German (default setting) Spanish Greek French Indonesian Italian Hungarian Dutch Norwegian Polish Brazilian Portuguese European Portuguese Russian Romanian Finnish Swedish Vietnamese Turkish Ukrainian Arabic Simplified Chinese Traditional Chinese Japanese Korean Thai Hindi Reference Section E78 The Setup Menu TV Settings Press the d button Mz tab M TV settings Adjust settings for connection to a TV. Option Description Video mode Select from NTSC and PAL. HDMI Select a resolution for HDMI output from Auto (default setting), 480p, 720p, or 1080i. When Auto is selected, the option best suited to the TV to which the camera is connected is automatically selected from 480p, 720p, or 1080i. HDMI device control Select whether or not the camera can receive signals from a TV that supports the HDMI-CEC standard when it is connected to the TV via HDMI. When On (default setting) is selected, the TV’s remote control can be used to control the camera during playback. See “Using a TV Remote Control (HDMI Device Control)” (E24) for more information. HDMI 3D output Set the method used to output 3D images captured with this camera to HDMI devices. Select On (default setting) to play back 3D images in 3D. Reference Section C HDMI and HDMI-CEC HDMI (High-Definition Multimedia Interface) is a multimedia interface. HDMI-CEC (HDMI-Consumer Electronics Control) allows compatible devices to inter-operate. E79 The Setup Menu Charge by Computer Press the d button Mz tab M Charge by computer Select whether or not the battery inserted into the camera is charged when the camera is connected to a computer via the USB cable (A81). Option Description Auto (default setting) When the camera is connected to a computer that is running, the battery inserted into the camera is automatically charged using power supplied by the computer. Off The battery inserted into the camera is not charged when the camera is connected to a computer. B Notes About Connecting the Camera to a Printer • The battery cannot be charged with connection to a printer, even if the printer complies with the PictBridge standard. • When Auto is selected for Charge by computer, it may be impossible to print images with direct connection of the camera to some printers. If the PictBridge startup screen is not displayed in the monitor after the camera is connected to a printer and turned on, turn the camera off and disconnect the USB cable. Set Charge by computer to Off and reconnect the camera to the printer. E80 Reference Section The Setup Menu B Notes About Charging with Connection to a Computer • The battery cannot be charged, nor can data be transferred, when the camera is connected to a computer before the camera’s display language and date and time have been set (A24). If the camera’s clock battery (A25) has been exhausted, the date and time must be reset before the battery can be charged o...