Évaluations - 0, GPA: 0
(
)
)
|
Photos et spécifications Olympus FE-340 |
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
768 pixels or more 65,536 colors or more (16.77 million colors or more recommended) 1,024 . 768 pixels or more 32,000 colors or more (16.77 million colors or more recommended) Other USB port or IEEE 1394 port Internet Explorer 6 or later QuickTime 7 or later recommended DirectX 9 or later recommended USB port or IEEE 1394 port (FireWire) Safari 1.0 or later (1.3 or later recommended) QuickTime 6 or later Using OLYMPUS Master Note • Use a computer with a pre-installed operating system. Operations are not guaranteed on home-built computers or computers with an updated operating system. • Operations are not guaranteed when using an added USB port or IEEE 1394 port. • To install the software, you must log on as a user with administrators’ privileges. • If you are using Macintosh, be sure to remove the media (drag & drop onto the trash icon) before performing the following operations. Failure to do so could result in unstable computer operation and the need to reboot. • Disconnect the cable connecting the camera to the computer • Turn off the camera • Open the camera’s battery/card compartment cover EN 37 For how to install the OLYMPUS Master software, refer to the installation guide included in the CDROM. Connecting the camera to a computer Connecting the camera to a computer 1 Make sure the camera is turned off. • The monitor is off. • The lens is retracted. Monitor 2 Connect the multi-connector on the camera to the FE-320/X-835/C-540 USB port on the computer using the provided USB cable. • Refer to your computer’s instruction manual to locate the position of the USB port. • The camera turns on automatically. • The monitor turns on and the selection screen for the USB connection is displayed. Multi-connector FE-340/X-855/C-560 Using OLYMPUS Master Connector cover Multi-connector 3 Select [PC], and press .. 4 The camera is recognized by the computer. • Windows When you connect the camera to your computer for the first time, the computer attempts to recognize the camera. Click “OK” to exit the message that is displayed. The camera is recognized as a “Removable Disk”. • Macintosh The iPhoto program is the default application for managing digital images. When you connect your digital camera for the first time, the iPhoto application starts automatically, so close this application and start OLYMPUS Master. Note • The camera functions are disabled while the camera is connected to a computer. • Connecting the camera to a computer via a USB hub may cause unstable operation. In this case, do not use a hub, but connect the camera directly to the computer. • Images cannot be transferred to your computer with OLYMPUS Master if [PC] is selected in Step 3, Y is pressed and [MTP] is selected. USB PC EASY PRINT CUSTOM PRINT EXIT SET OK 38 EN Start up the OLYMPUS Master software Start up the OLYMPUS Master software Windows 1 Double-click the “OLYMPUS Master 2” icon Macintosh 1 Double-click the “OLYMPUS Master 2” icon Master 2” folder. on the desktop. in the “OLYMPUS • The browse window is displayed. • When OLYMPUS Master is started up for the first time after installation, the OLYMPUS Master initial setting screen and user registration screen are displayed before the browse window. Follow the on-screen instructions. Displaying camera images on a computer Downloading and saving images 1 Click “Transfer Images” on the browse window, and then click “From Camera” . • The window for selecting the pictures you want to transfer from the camera is displayed. All the images in the camera are displayed. 2 Select “New Album” and enter an album name. 3 Select the image files and click “Transfer Images”. • A window indicating that the download is complete is displayed. 4 Click “Browse images now”. • The downloaded images are displayed in the browse window. To disconnect the camera Using OLYMPUS Master 1 Make sure that the card access lamp has stopped blinking. Card access lamp Card access lamp FE-320/X-835/C-540 FE-340/X-855/C-560 EN 39 2 Make the following preparations for disconnecting the USB cable. Windows 1 Click the “Unplug or Eject Hardware” icon in the system tray. 2 Click the message that is displayed. 3 When a message is displayed saying that the hardware can be ejected safely, click “OK”. Macintosh 1 The trash icon changes to the eject icon when the “Untitled” or “NO_NAME” icon on the desktop is dragged. Drag and drop it on the eject icon. 3 Disconnect the USB cable from the camera. Note • Windows: When you click “Unplug or Eject Hardware”, a warning message may be displayed. Make sure that image data is not being downloaded from the camera and that all applications are closed. Click the “Unplug or Eject Hardware” icon again and disconnect the cable. For detailed operations of OLYMPUS Master, refer to the quick start guide displayed upon startup or the help of the OLYMPUS Master. Using OLYMPUS Master To download and save images to a computer without usingOLYMPUS Master This camera is compatible with USB mass storage. You can con...