Évaluations - 0, GPA: 0
(
)
)
|
Photos et spécifications Olympus X-560WP |
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
NOCancelsthebackup. It takes some time to back up data. Check that the battery has sufficient power before starting the backup. Changing the display language [W] E SETUP • W “Changing the display language” (p. 13) Adjusting the CCD and adjusting the image processing function [PIXEL MAPPING] E SETUP • PIXEL MAPPING This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended. For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again. T o adjust the CCD and to adjust the image processing function Press the obutton when [START] (submenu 2) is displayed. .The camera checks and adjusts the CCD and the image processing function at the same time. Using the Kbutton or qbutton to turn on the camera [K/q] E SETUP • K/q Submenu 2 Application YES Pressing K button turns on the camera in shooting mode. Pressing qbutton turns on the camera in playback mode. NO The camera is not turned on when K button or qbutton is pressed. To turn on the camera, press the nbutton. Submenu 2 Application Languages*1Thelanguageforthemenusanderrormessagesdisplayedonthemonitorisselected. EN 1 Saving the shooting mode setting when the camera is turned off [SAVE SETTINGS] ESETUP.SAVESETTINGSWhensetto[NO],allshootingsettingssetinotherthanP mode,[A](IMAGEQUALITY) andsmodereturntodefaultsettingswhenthecameraisturnedoff. Selecting the menu screen color and background [MENU COLOR] ESETUP.MENUCOLORSubmenu 2 Application NORMAL/ COLOR1/ COLOR2/ COLOR3Selectsthemenuscreencolororbackgroundimageaccordingtoyourpreference. Submenu 2 Application YES The shooting mode is saved when the camera is turned off and is reactivated the next time the camera is turned on. NO The shooting mode is set to the P mode when the camera is turned on. Setting the operation sound [BEEP] E SETUP • BEEP Turn off or on the operating sound/ OFF/ON warning sound of the camera buttons. Submenu 2 Application To turn off all sounds at once, make the setting from [F SILENT MODE] (p. 33). Adjusting the brightness of the monitor [s] E SETUP • s Selects the monitor brightness BRIGHT/ depending on the surrounding NORMAL brightness. Submenu 2 Application Setting the date and time [X] E SETUP • X “Setting the date and time” (p. 13) T o select the date and time display order 1 Press d after setting “Minute”, and use ab to select the date display order. X YMD TIME 200908261230YMD Date order OK CANCEL MENU SET EN Make the settings for the functions while referring to “Using the Menu” (p. 3). Make the settings for the functions while referring to “Using the Menu” (p. 3). Selecting the video signal system to match your TV [VIDEO OUT] E SETUP • VIDEO OUT The TV video signal system varies depending on the countries and regions. Before viewing camera images on your TV, select the video output according to your TV’s video signal type. Submenu 2 Application NTSCConnectingthecameratoaTVinNorthAmerica,Taiwan,Korea,Japan,andsoonPALConnectingthecameratoaTVinEuropeancountries,China,andsoon The factory default settings differ according to the region where the camera is sold. To play back camera images on a TV 1ConnecttheTVandcamera. ConnecttotheTVvideoinputjack(yellow)andaudioinputjack(white). Multi-connectorAVcable(supplied) Connectorcover 2Use the camera to select the same video signal system as the one of connected TV ([NTSC]/ [PAL]). 3Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).” For details on changing the input source of the TV, refer to the TV’s instruction manual. 4Press the qbutton, and use abcd to select the image for playback. Depending on the TV’s settings, the displayed images and information may become cropped. Saving battery power between shots Turning off the camera sounds [POWER SAVE] [FSILENT MODE] E SETUP • POWER SAVE F SILENT MODE Submenu 2 Application Button operation sound/warning OFF Cancels [POWER SAVE] OFF sound are output. When the camera is not being The electric sounds (button used for approx. 10 seconds, the ON ON operation sound, warning sound) monitor automatically turns off to are muted. save battery power. Submenu 1 Application [BEEP] (p. 32) To resume standby mode Press any button. EN Printing Printing Direct printing (PictBridge*1) By connecting the camera to a PictBridgecompatible printer, you can print images directly without using a computer. To find out if your printer supports PictBridge, refer to the printer’s instruction manual. *1 PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly. The printing modes, paper sizes, and other parameters that can be set with the camera vary depending on the printer that is used. For details, refer to the printer’s instruction manual. For details on the available paper types, loading paper, and installing in...