Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Otherwise, the internal memory data or the memory card may be damaged. Be sure to make a backup copy to protect your data. On database files When you insert a memory card without a database file into the camera and turn on the power, part of the memory card capacity is used to automatically create a database file. It may take some time until you can perform the next operation. GB Notes on recording/playback Notes on recording/playback When you use a memory card with this camera for the first time, it is recommended to format the card using the camera for stable performance of the memory card before shooting. Note that formatting permanently erases GB all data on the memory card, and is unrecoverable. Save precious data on a computer, etc. • Before you start recording, make a trial recording to make sure that the camera is working correctly. • The camera is neither dust-proof, nor splash-proof, nor water-proof. Read “Precautions” (page 25) before operating the camera. • Avoid exposing the camera to water. If water enters inside the camera, a malfunction may occur. In some cases, the camera cannot be repaired. • Do not aim the camera at the sun or other bright light. It may cause the malfunction of the camera. • Do not use the camera near a location that generates strong radio waves or emits radiation. Otherwise, the camera may not properly record or play back images. • Using the camera in sandy or dusty locations may cause malfunctions. • If moisture condensation occurs, remove it before using the camera. • Do not shake or strike the camera. It may cause a malfunction and you may not be able to record images. Furthermore, the recording media may become unusable or image data may be damaged. • Clean the flash surface before use. The heat of flash emission may cause dirt on the flash surface to become discolored or to stick to the flash surface, resulting in insufficient light emission. Notes on the LCD screen and lens • The LCD screen is manufactured using extremely high-precision technology so over 99.99% of the pixels are operational for effective use. However, some tiny black and/or bright dots (white, red, blue or green) may appear on the LCD screen. These dots are a normal result of the manufacturing process, and do not affect the recording. • When the battery level becomes low, the lens might stop moving. Insert a charged battery pack and turn on the camera again. On camera’s temperature Your camera and battery may get warm due to continuous use, but it is not a malfunction. GB On the overheat protection On the overheat protection On image data compatibility • The camera conforms with DCF (Design rule for Camera File system) universal standard established by JEITA (Japan Electronics and Information Technology Industries Association). • Sony does not guarantee that the camera will play back images recorded or edited with other equipment, or that other equipment will play back images recorded with the camera. Warning on copyright Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws. No compensation for damaged content or recording failure Sony cannot compensate for failure to record or loss or damage of recorded content due to a malfunction of the camera or recording media, etc. GB Identifying parts Identifying parts A Shutter button B Mode dial C For shooting: W/T (Zoom) lever For viewing: (Playback zoom) lever/ (Index) lever D Flash E ON/OFF (Power) button F Microphone G Self-timer lamp/Smile Shutter lamp/AF illuminator H Lens J Hook for wrist strap K (Playback) button GB L Control button Menu on: v/V/b/B/z Menu off: DISP/ / / M (Delete) button N MENU button O Tripod receptacle • Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur. P Speaker Q Multi connector R Battery/memory card cover S Access lamp T Battery insertion slot U Battery eject lever V Memory card slot GB I LCD screen Charging the battery pack 1 Insert the battery pack into the battery charger. • You can charge the battery even when it is partially charged. Battery pack 2 Connect the battery charger to the wall outlet (wall socket). If you continue charging the battery pack for about one more hour after the CHARGE lamp turns off, the charge will last slightly longer (full charge). CHARGE lamp Lit: Charging Off: Charging finished (normal charge) For customers in the USA and Canada Plug CHARGE lamp For customers in countries/regions other than the USA and Canada CHARGE lamp Power cord (Mains lead) 3 When charging is finished, disconnect the battery charger. GB x Charging time x Charging time Normal charge time Approx. 330 min. Approx. 270 min. GB Notes • The table above shows the time required to charge a fully depleted battery pack at a temperature of 25 °C (77 °F). Charging may take longer depending on conditions of use and ci...