Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
– The zoom is switched alternately between the W and T ends. – The flash strobes once every two times. – The power turns on and off once every ten times. • The battery life for movies applies shooting under the following conditions: – Record Setting: 60i 17M(FH)/50i 17M(FH) – When continuous shooting ends because of set limits (29 minutes), press the MOVIE (Movie) button again to continue shooting. Shooting functions such as zoom will not be available. GB x Supplying power x Supplying power Inserting a memory card (sold separately) Ensure the notched corner faces correctly. 1 Open the cover. 2 Insert the memory card (sold separately). • With the notched corner facing as illustrated, insert the memory card until it clicks into place. 3 Close the cover. GB x Memory cards that can be used x Memory cards that can be used Memory card For still images For movies A Memory Stick PRO Duo (Mark2 only) Memory Stick PRO-HG Duo Memory Stick Duo — B Memory Stick Micro (M2) (Mark2 only) SD memory card (Class 4 or faster) C SDHC memory card (Class 4 or faster) SDXC memory card (Class 4 or faster) D microSD memory card (Class 4 or faster) microSDHC memory card (Class 4 or faster) • In this manual, the products in the table are collectively referred to as follows: A: “Memory Stick Duo” media B: “Memory Stick Micro” media C: SD card D: microSD memory card Notes • When using “Memory Stick Micro” media or microSD memory cards with this camera, make sure to use with the appropriate adaptor. x To remove the memory card/battery pack Memory card: Push the memory card in once to eject the memory card. Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack. Notes • Never remove the memory card/battery pack when the access lamp (page 8) is lit. This may cause damage to data in the memory card. GB Setting the clock Control wheel ON/OFF (Power) Power/Charge lamp (green) Setting the clock Control wheel ON/OFF (Power) Power/Charge lamp (green) Select items: b/B Set the numeric value of date and time: v/V// Set: z 1 Press the ON/OFF (Power) button. Date & Time setting is displayed when you turn on the camera for the first time. • It may take time for the power to turn on and allow operation. 2 Check that [Enter] is selected on the screen, then press z on the control wheel. 3 Select a desired geographic location by following the on-screen instructions, then press z. 4 Set [Daylight Svg.:], date and [Date Format:], then press z. • Midnight is indicated as 12:00 AM, and noon as 12:00 PM. 5 Check that [Enter] is selected, then press z. GB Shooting still images/movies Shooting still images/movies W/T (zoom) lever Mode dial : Intelligent Auto W: zoom out : Movie T: zoom in MOVIE Shooting still images 1 Press the shutter button halfway down to focus. When the image is in focus, a beep sounds and the z or indicator lights. 2 Press the shutter button fully down to shoot an image. Shooting movies 1 Press the MOVIE (Movie) button to start recording. • Use the W/T (zoom) lever to change the zoom scale. • Press the shutter button to shoot still images while continuing to record the movie. 2 Press the MOVIE button again to stop recording. Notes • Do not pull up the flash manually. This may cause a malfunction. • When using the zoom function while shooting a movie, the sound of the camera operating will be recorded. The sound of the MOVIE button operating may also be recorded when movie recording is finished. • Continuous shooting is possible for approximately 29 minutes at one time at the camera’s default settings and when the temperature is approximately 25°C (77°F). When movie recording is finished, you can restart recording by pressing the MOVIE button again. Recording may stop to protect the camera depending on the GB ambient temperature. Viewing images / (Delete) Control wheel (Playback) W: zoom out T: zoom in Select images: B (next)/b (previous) or turn the control wheel Fn (Function) Viewing images / (Delete) Control wheel (Playback) W: zoom out T: zoom in Select images: B (next)/b (previous) or turn the control wheel Fn (Function) Set: z 1 Press the (Playback) button. • You can switch the display mode between still images and movies by selecting MENU t 1 t [Still/Movie Select]. x Selecting next/previous image Select an image by pressing B (next)/b (previous) on the control wheel or by turning the control wheel. Press z in the center of the control wheel to view movies. x Deleting an image 1 Press / (Delete) button. 2 Select [Delete] with v on the control wheel, then press z. x Rotating an image Press the Fn (Function) button. x Returning to shooting images Press the shutter button halfway down. GB Viewing the Guide Viewing the Guide GB / MENU (In-Camera Guide) In-Camera Guide The camera displays explanations for MENU items and the setting values. 1 Press the MENU button. 2 Select the desired MENU item, then press / (In-Camera Guide) button. Shooting Tip The camera displays shooting tips for the shooting mode selected. ...