Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
2 Surface contacting the sealing gasket GB • • • Do not open/close the battery/memory card cover with wet or sandy hands or near water. There is a risk this will lead to sand or water getting inside. Before opening the cover, perform the procedure described in “Cleaning after using the camera under/near water”. GB • Open the battery/memory card cover with the camera completely dry. • Always confirm that the battery/memory card cover has been securely locked. Notes on using the camera under/near water • The touch panel may be activated by water splashes on the screen icons. When using the camera under/near water, it is recommended that you hide the icons by touching on the right side of the screen. Touch for a few seconds to display the icons again. • The touch panel cannot be operated underwater. Use the buttons of the camera to perform shooting operations. • Do not subject the camera to shock such as from jumping into water. • Do not open and close the battery/memory card cover while under/near water. • This camera sinks in water. Place your hand through the wrist strap to prevent the camera from sinking. • Faint, white, circular spots may appear in under-water flash photos due to reflections off of floating objects. This is not a malfunction. • Select (Underwater) in Scene Selection to shoot underwater with less distortion. • If water drops or other foreign matter is present on the lens, you will be unable to record clear images. • Do not open the lens cover where the sand is whirling. Cleaning after using the camera under/near water • Always clean the camera with water after use within 60 minutes, and do not open the battery/memory card cover before cleaning is finished. Sand or water may get inside places where it cannot be seen. If not rinsed, waterproof performance will be degraded. GB 9 • • • After rinsing, wipe away water drops with a soft cloth. Allow the camera to dry completely in a shady location with good ventilation. Do not blow dry with a hair dryer as there is a risk of deformation and/or degraded waterproof performance. • Wipe away water drops or dust on the memory card/battery cover with a soft dry cloth. • This camera is constructed to drain water. Water will drain from openings around the ON/OFF (Power) button, zoom lever, and other controls. After removing from water, place the camera on a dry cloth for a while to allow water to drain. • Bubbles may appear when the camera is placed under water. This is not a malfunction. • The camera body may become discolored if it comes in contact with sunscreen or suntan oil. If the camera does come in contact with sunscreen or suntan oil, quickly wipe it clean. • Do not allow the camera to sit with salt water inside or on the surface. This may lead to corrosion or discoloration, and degradation of water-proof performance. • To maintain the water-proof performance, we recommend that once a year you take the camera to your dealer, or to an authorized repair shop, to have the sealing gasket of the battery/memory card cover replaced for a fee. GB Identifying parts Identifying parts A Lens cover B Flash C Self-timer lamp/Smile Shutter lamp/AF illuminator D Lens E LED light GB F Microphone G MOVIE (Movie) button H OLED screen/Touch panel I Speaker (built-in) J ON/OFF (Power) button K W/T (Zoom) lever L Shutter button M Hook for wrist strap N Multi/Micro USB Terminal* O Charge lamp P Memory card slot Q Battery eject lever R Battery/memory card cover S Battery insertion slot T Access lamp U HDMI micro jack V Tripod receptacle • Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur. * Supports Micro USB compatible device. GB 11 Inserting the battery pack Inserting the battery pack 1 Open the cover. 2 Insert the battery pack. • Align the battery pack with the guide inside the battery insertion slot. Insert the battery pack until the battery eject lever locks into place. • Securely close the battery cover until you hear the slide lock on the cover catch in place and so that the yellow mark under the slide lock can no longer be seen. • Closing the cover with the battery inserted incorrectly may damage the camera. GB Charging the battery pack Power cord (Mains lead) For customers in the USA, Canada For customers in countries/regions other than the USA and Canada Charge lamp Lit: Charging Off: Charging finished Flashing: Charging error or charging paused temporarily because the camera is not within the proper temperature range Charging the battery pack Power cord (Mains lead) For customers in the USA, Canada For customers in countries/regions other than the USA and Canada Charge lamp Lit: Charging Off: Charging finished Flashing: Charging error or charging paused temporarily because the camera is not within the proper temperature range 1 Open the battery/memory card cover and connect the camera and the AC Adaptor (supplied), using the micro USB cable (supplied). 2 Connect ...