Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
Do not charge for an extended period of time. – Do not turn on/off or restart the computer, or wake the computer to resume from sleep mode when a USB connection has been established between the computer and the camera. The camera may cause a malfunction. Before turning on/off, or restarting the computer or waking the computer from sleep mode, disconnect the camera and the computer. – No guarantees are made for charging using a custom-built computer or a modified computer. x Battery life and number of images can be recorded and played back Battery life Number of images Shooting (still images) Approx. 125 min. Approx. 250 images Viewing (still images) Approx. 180 min. Approx. 3600 images Shooting (movies) Approx. 60 min. — Notes • The above number of images applies when the battery pack is fully charged. The number of images may decrease depending on the conditions of use. • The number of images that can be recorded is for shooting under the following conditions: – Using Sony microSD memory card (Class 4 or faster) (sold separately) – The battery pack is used at an ambient temperature of 25°C (77°F). GB • • shooting under the following conditions: (CIPA: Camera & Imaging Products Association) – [Panel Brightness] is set to [3]. – Shooting once every 30 seconds. – The zoom is switched alternately between the W and T ends. – The flash strobes once every two times. – The power turns on and off once every ten times. • The battery life for movies applies shooting under the following conditions: – Movie quality: AVC HD HQ – When continuous shooting ends because of set limits (page 22), touch (Movie button) again and continue shooting. Shooting functions such as the zoom do not operate. x Supplying power The camera can be supplied with power from the wall outlet (wall socket) by connecting to the AC Adaptor, using the multi-use terminal USB cable. You can import images to a computer without worrying about draining the battery pack by connecting the camera to a computer using the multi-use terminal USB cable. In addition, you can use the AC Adaptor AC-UD10 (sold separately) for shooting to supply power when shooting. Notes • Power cannot be supplied when the battery pack is not inserted in the camera. • When the camera is connected directly to a computer or to a power outlet using the supplied AC Adaptor AC-UB10/UB10B, power supply is available only in playback mode. If the camera is in shooting mode or while you are changing the settings of the camera, power is not supplied even if you make a USB connection using the multi-use terminal USB cable. • If you connect the camera and a computer using the multi-use terminal USB cable while the camera is in playback mode, the display on the camera will change from the playback screen to the USB connection screen. Touch (Playback) to switch to the playback screen. GB Inserting a memory card (sold separately) Make sure that the correct side is facing up. “Memory Stick Micro” media microSD memory card Inserting a memory card (sold separately) Make sure that the correct side is facing up. “Memory Stick Micro” media microSD memory card 1 Open the cover. 2 Insert the memory card (sold separately). “Memory Stick Micro” (M2) media: Insert the memory card until it clicks into place as shown (A). microSD memory card: Insert the memory card until it clicks into place as shown (B). • If the memory card is not inserted straight and in the correct direction, the camera cannot read the memory card and (Internal Memory) is displayed. • Only one memory card can be inserted. 3 Close the cover. GB x Memory cards that can be used x Memory cards that can be used For still images For movies A Memory Stick Micro a — Memory Stick Micro (Mark2) a a B microSD memory card a a (Class 4 or faster) microSDHC memory card a a (Class 4 or faster) • In this manual, products in A are collectively referred to as “Memory Stick Micro” media, and products in B are collectively referred to as microSD memory card. x To remove the memory card/battery pack Memory card: Push the memory card in once to eject the memory card. Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack. Note • Never remove the memory card/battery pack when the access lamp (page 8) is lit. This may cause damage to data in the memory card/internal memory. GB Setting the clock Setting the clock ON/OFF (Power) button Lens cover 1 Lower the lens cover. The camera is turned on. The power lamp lights up green only when the camera starts up. Date & Time setting is displayed when you turn on the camera for the first time. • You can also turn on the camera by pressing the ON/OFF (Power) button. • It may take time for the power to turn on and allow operation. 2 Select a desired language. 3 Select a desired geographic location by following the on-screen instructions, then touch [Next]. 4 Set [Daylight Savings] or [Summer Time], [Date & Time Format] and [Date & Time], then touch [Next]. • Midnight is indicated as 12:00 AM, and ...