Évaluations - 4, GPA: 4
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
(Local) Choose the area for which you want to activate the focus from among nine areas with the control button. If you press and hold the center of the control button during the shooting, you can temporarily adjust the focus using the AF areas located in the center area. Notes • When the exposure mode is set to AUTO or Scene Selection, [AF area] is fixed to (Wide) and you cannot select the other settings. • The AF area may not be illuminated during continuous shooting or when the shutter button is pressed all the way down without pause. • The green frames that are displayed when the focus has been confirmed indicate the area used for focusing. They do not indicate the size of the area. The AF area and the frames may not be located on the same position. This is not a malfunction. Adjusting the focus manually (Manual focus) Adjusting the focus manually (Manual focus) 1 Set the focus mode switch on the lens to MF. 2 When the lens is not equipped with the focus mode switch, set the focus mode switch on the camera to MF. 3 Rotate the focusing ring of the lens to achieve a sharp focus. ring Focusing Notes • In the case of a subject that can be focused in autofocus mode, the z indicator lights up when the focus is confirmed. When the Wide AF area is used, the center area is used, and when the Local AF area is used, the area that is selected with the control button is used. • When using a tele converter (sold separately), etc., rotation of the focusing ring may not be smooth. • The correct focus in the viewfinder is not achieved if the diopter is not adjusted properly in viewfinder mode (page 69). • The direct manual focus function is not available on this camera. 81 Using the function Zooming in in one step Zooming in in one step 1 Set the LIVE VIEW/OVF switch to “LIVE VIEW.” button 2 Press the button. • Each time you press the button, the zoom scaling changes as follows: Approx. .1.4 t Approx. .2 t Off The image size is automatically set to the following regardless of the selected image size. Zoom scaling Image size Approx. .1.4 M* Approx. .2 S* * The number of pixels in the image size selected here is different from that of the image size selected in normal mode. M: 3264 . 2176 pixels (DSLR-A380)/ 2768 . 1840 pixels (DSLR-A330) S: 2416 . 1600 pixels (DSLR-A380)/ 2032 . 1360 pixels (DSLR-A330) Notes • When the LIVE VIEW/OVF switch is set to “OVF,” the smart teleconverter is unavailable. • When [Quality] is set to (RAW) or (RAW & JPEG), the smart teleconverter is unavailable. • When the smart teleconverter is available (when in autofocus mode), [AF area] is set to (Spot). • • (Multi segment). Using the function 83 Using the flash Using the flash , and it also helps to prevent camera shake. When shooting into the sun, you can use the flash to shoot a bright image of the backlit subject. When the mode dial is set to AUTO, the flash pops up automatically if it is dark or you are shooting into the light. 1 on the control button t Select the desired setting 2 After the flash has finished charging, shoot the subject. Flashing: The flash is being charged. When the indicator flashes, you cannot release the shutter. Lit: The flash has been charged and is ready to fire. • When you press the shutter button halfway down under dark lighting in autofocus mode, the flash may be fired to help focus on a subject (AF illuminator). (Flash charging) indicator (Flash Off) (Flash Off) (Autoflash) Fires if it is dark or against light. (Fill-flash) Fires every time you trigger the shutter. (Slow sync.) Fires every time you trigger the shutter. Slow sync shooting allows you to shoot a clear image of both the subject and the background by slowing the shutter speed. (Rear sync.) Fires right before the exposure is completed everytime you trigger the shutter. (Wireless) Fires an external flash (sold separately) that is off the camera and away from it (Wireless flash shooting). Shooting techniques • The lens hood (sold separately) may block the light of the flash. Remove the lens hood when using the flash. • When using the flash, shoot the subject at a distance of 1 m (3.3 feet) or greater. • When shooting indoors or shooting nightscapes, you can use slow sync to shoot a brighter image of people and backgrounds. • You can use rear sync to shoot a natural image of the trail of a moving subject such as a moving bicycle or a walking person. Notes • Do not hold the camera by grabbing the flash emitter. • Shooting conditions required to prevent shadows from appearing on an image vary, depending on the lens. • When the exposure mode is set to AUTO or Scene Selection, the (Slow sync.), (Rear sync.), and (Wireless) items cannot be selected. Using the function 85 The flash range The flash range Aperture F2.8 F4.0 F5.6 ISO setting AUTO 1.4 – 7.1 m (4.6 – 23 feet) 1 – 5 m (3.3 – 16 feet) 1 – 3.6 m (3.3 – 11 feet) 100 1 – 3.6 m (3.3 – 11 feet) 1 – 2.5 m (3.3 – 8.2 feet) 1 – 1.8 m (3.3 – 5.9 feet) 200 1 – 5.1 m (3.3 – 16 feet) 1 – 3.5 m (3.3 – 11 feet) 1 –...
Ce manuel est également adapté pour les modèles :Caméras - DSLR-A330 (5.98 mb)
Caméras - DSLR-A330H (5.98 mb)
Caméras - DSLR-A330L (5.98 mb)
Caméras - DSLR-A330Y (5.98 mb)