Évaluations - 1, GPA: 4
(
)
)
|
Par ce dispositif a également d'autres instructions :
Caméras - DSC-W330 (849.1 kb)
Caméras - DSC-W330 (4.57 mb)
Caméras - DSC-W330 (1.57 mb)
Facilité d'utilisation
– The flash strobes once every two times. – The power turns on and off once every ten times. – A fully charged battery pack (supplied) is used at an ambient temperature of 25 °C (77 °F). – Using Sony “Memory Stick PRO Duo” media (sold separately). zUsing the camera abroad You can use the camera and the battery charger (supplied) in any country or region where the power supply is within 100 V to 240 V AC, 50/60 Hz. Do not use an electronic transformer (travel converter). This may cause a malfunction. GB Inserting the battery pack/a memory card (sold separately) 1 Open the cover. 2 Insert the memory card (sold separately). With the notched corner facing down as illustrated, insert the memory card until it clicks into place. Ensure the notched corner faces correctly. 3 Insert the battery pack. Check the direction of the battery, insert the battery pack while pressing the battery eject lever in the direction of the arrow. Insert the battery until the battery eject lever is locked. 4 Close the cover. Closing the cover with the battery inserted incorrectly may damage the camera. GB x x The following memory cards are compatible with this camera: “Memory Stick PRO Duo” media, “Memory Stick PRO-HG Duo” media, “Memory Stick Duo” media, SD memory cards and SDHC memory cards. MultiMediaCard is not compatible. In this manual, “Memory Stick PRO Duo” media, “Memory Stick PRO-HG Duo” media and “Memory Stick Duo” media are collectively referred to as “Memory Stick Duo” media. When recording movies, it is recommended that you use the following memory cards: – (“Memory Stick PRO Duo” media) – (“Memory Stick PRO-HG Duo” media) – SD memory card or SDHC memory card (Class 2 or faster) For details on the number of images/time that can be recorded, see page 24. x To remove the memory card Access lamp Make sure that the access lamp is not lit, then push the memory card in once. Note • Never remove the memory card/battery pack when the access lamp is lit. This may cause damage to data in the memory card/internal memory. x When there is no memory card inserted Images are stored in the camera’s internal memory (approximately 28 MB). To copy images from the internal memory to a memory card, insert the memory card in the camera, then select MENU t (Settings) t (Memory Card Tool) t [Copy]. GB x x Slide the battery eject lever. Be sure not Battery eject lever to drop the battery pack. x Checking the remaining battery charge A remaining charge indicator appears on the LCD screen. Low High Notes • It takes about one minute until the correct remaining charge indicator appears. • The remaining charge indicator may not be correct under certain circumstances. • When [Power Save] is set to [Standard] or [Stamina], if you do not operate the camera running on a battery pack for a certain amount of time, the camera automatically turns off to prevent wearing down the battery pack (Auto Power off). • To prevent staining the terminal, short-circuiting, etc., be sure to use a plastic bag to keep away from metal materials when carrying or storing. GB Setting the clock 1 Press the ON/OFF (Power) ON/OFF (Power) button button. The camera is turned on. • It may take time for the power to turn on and allow operation. 2 Select a setting item with v/V on the control button, then press z. Date & Time Format: Selects the date and time display format. Date & Time: Sets the date and time. Control button 3 Set the numeric value and desired settings with v/V/ b/B, then press z. • Midnight is indicated as 12:00 AM, and noon as 12:00 PM. 4 Select [OK], then press z. x Setting the date and time again Press the MENU button, then select (Settings) t (Clock Settings). GB Shooting still images 1 Set the mode switch to ON/OFF (Power) button (Still Image), then press the ON/OFF (Power) button. Mode switch 2 Hold the camera steady as illustrated. • Press the T button to zoom in, W button to zoom out. 3 Press the shutter button Shutter button halfway down to focus. AE/AF When the image is in focus, a beep lock sounds and the z indicator lights. 4 Press the shutter button fully down. GB Shooting movies 1 Set the mode switch to ON/OFF (Power) button (Movie), then press the ON/OFF (Power) button. Mode switch 2 Press the shutter button fully down to start recording. 3 Press the shutter button fully down again to stop recording. GB Viewing images Viewing images (Playback) button x Selecting next/previous image Select an image with B (next)/b (previous) on the control button. • Press z in the center of the control button to view movies. x Deleting an image (Delete) button 1 Press 2 Select [This Image] with v on the (Delete) button. control button, then press z. Control button x Returning to shooting images Press the shutter button halfway down. x Turning off the camera Press ON/OFF (Power) button. GB Learning more about the camera (“Cyber-shot Handbook”) Learning more about the camera (“Cyber-shot Handbook”) x For Windows users 1 Turn on your computer, and insert the CD-ROM (supplie...
Ce manuel est également adapté pour les modèles :Caméras - DSC-W320 (302.71 kb)