Log:
Évaluations - 4, GPA: 3.8 ( )

Instructions Buhler, Modèle Genesis II 2210

Fabricant : Buhler
Taille : 1.03 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


(7.5 L) / bore and stroke: 4.4" x 5.0" (112 x 127 mm) Cruise control / fuel cooler Standard / N/A Standard / N/A Standard / Standard Standard / Standard Transmission type Genesis Full Powershift Standard - full powershift 18 forward speeds, 9 reverse: 25 mph (40 km/h) Straight-line shuttle shift with programming Yes Electrical system Advanced diagnostics with 2-12 volt low maintenance 950 CCA each battery and 12 V-130 amp alternator Standard lights Halogen - 2 headlights, 9 worklights, 2 front roof mounted Optional lights available High intensity discharge (HID) lighting Radar / rear wiper / washer Optional Hydraulic type Closed Center Load Sensing, relief- 2900 psi (200 Bar) Flow at 2100 rpm Standard: 30 GPM (117 L/min), Optional: HydraFlow® Plus 55 GPM (208 L/min) Number of remotes Standard: color coded system with 3 valves, Optional: 4th valve available Front axle - track setting, 2WD 61" to 87" (1575 mm to 2210 mm) N/A - track setting, FWD 60" to 88" (1524 mm to 2235 mm) - track setting, Ultra Steer® 60" to 88" (1524 mm to 2235 mm) Rear axle length 112" (2845 mm) 112" or 120" (2845 mm or 3050 mm) Rear axle diameter 3.62" (92 mm) 4.13" (105 mm) Rear axle track - width adjustable Axle A-112" 60" to 124" (1524 mm to 3150 mm) Rear axle track - width adjustable Axle B-120" N/A 60" to 128" (1524 mm to 3255 mm) Three-point hitch Category III Standard (SAE) lift capacity 12,500 lbs (5670 kg) 15,000 Ibs (6804 kg) Electronic draft sensing Standard PTO SHafT 2145 2160 2180 2210 Type Wet / multi-plate clutch Speed 540 / 1000 rpm 1000 rpm (540 rpm opt.) 1000 rpm 1000 rpm 540 rpm 1.375" (34.9 mm) dia. 6 spline 1.375" (34.9 mm) dia. 6 spline N/A N/A 1000 rpm 1.375" (34.9 mm) dia. 21 spline 1.375" (34.9 mm) dia. 21 spline 1.75" (44.5 mm) dia. 20 spline 1.75" (44.5 mm) dia. 20 spline 1000 rpm † N/A 1.75" (44.5 mm) dia. 20 spline 1.375" (34.9 mm) dia. 21 spline 1.375" (34.9 mm) dia. 21 spline † optional output shaft CaPaCiTieS 2145 2160 2180 2210 Fuel tank 110 U.S. gal (416 L) 110 U.S. gal (416 L) 110 U.S. gal (416 L) 110 U.S. gal (416 L) Engine oil 22.5 qt (21 L) 22.5 qt (21 L) 22.5 qt (21 L) 22.5 qt (21 L) Hydraulic system 124 qt (117 L) 148 qt (140 L) 148 qt (140 L) 148 qt (140 L) Coolant system 26 qt (25 L) 26 qt (25 L) 28 qt (26.5 L) 28 qt (26.5 L) 3895 SLr LOader SPeCifiCaTiOnS 3895 SLr uLTra STeer 3895 SLS STandard STeer Type of loader Mechanical true self leveling system complete with manifold and block relief valve Breakout force 8500 lb-ft at pivot pin 9950 lb-ft at pivot pin Maximum lift capacity 6900 lbs (3129 kg) 6875 lbs (3125 kg) Lift cylinders 3.5" (90 mm) diameter, 32.5" (825 mm) stroke, 2" (51 mm) shaft 3.5" (90 mm) diameter, 32.5" (825 mm) stroke, 2" (51 mm) shaft Bucket cylinders 3.0" (76 mm) diameter, 24.5" (612 mm) stroke, 1.75" (44 mm) shaft 3.0" (76 mm) diameter, 24.5" (612 mm) stroke, 1.75" (44 mm) shaft Maximum lift height 181" (4.6 m) to pivot pin 169" (4.3 m) to pivot pin Maximum dump angle 61° 61° Maximum rollback angle 35° 35° OPT...

Ce manuel est également adapté pour les modèles :
Tondeuse à gazon - Genesis II 2145 (1.03 mb)
Tondeuse à gazon - Genesis II 2160 (1.03 mb)
Tondeuse à gazon - Genesis II 2180 (1.03 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories