Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
In these circumstances ear protection must be worn. Keep cab windows and doors CLOSED at all times to reduce noise level. The machine must only be coupled to a correctly sized tractor, and no other machines or implements must be coupled. The weight of the tractor must correspond to the machine. Observe all local laws. Be careful that the tractor is not unbalanced when coupling. Make sure that the tractor has the correct PTO. A machine intended for 540 rpm PTO input speed must never be coupled to a tractor with 1000 rpm PTO output speed. Coupling of tractor and machine must be carried out as explained in the instructions. All lock pins must have locking retainers. Observe all local laws regarding road transport. Work in a safe way. The tractor engine must ALWAYS be stopped and the ignition key removed before carrying out repairs, cleaning, lubricating or maintaining the machine. 11 12 12 Safety guards. Make sure that ALL GUARDS are in good order and fitted correctly. Do no attempt to start the machine before ensuring this. Pay particular attention to the plastic guards of the PTO shaft. If damaged they must be replaced. The chain locks of the guards MUST always be fitted on a suitable place on the tractor and the machine to prevent the outer plastic guards turning. Hydraulics. Be very careful when dealing with hydraulics. Use eye protection and gloves. Escaping hydraulic oil under pressure might penetrate into the skin and cause serious infection. See a doctor if you have been exposed to injury. Be watchful - damaged hydraulic hoses must be replaced immediately. Never use sealing tape or similar to repair the hoses. The hoses must be securely fixed. All hydraulic hoses of the machine should be replaced at least every 4 years. Remember when uncoupling, and when leaving tractor/machine. The machine must be in the working position when uncoupling from the tractor. All hydraulic functions must be in neutral position, the machine must be lowered to the ground and be safely secured. Never allow children to play or be near agricultural machinery. Drive safely. Be aware of your responsibility - carelessness or slovenliness can cause serious injury or death. Before transporting on public roads, - always check that the machine is locked with cotter bolt and stop valve, that the coupling is in order, and that possible hydraulic systems and pawls are locked, see the manual of the machine. Drive carefully. Reduce speed when turning and driving on uneven ground - take care that tractor/ machine is not swinging and becoming unstable. Please note that there is danger of overturning when working on slopes and in soft ground conditions. The machine must not be used in situations that unbalances the tractor. Lighting. It is the responsibility of the owner/operator to provide correct lights and reflectors on the machine, when it is being transported on public roads after dark. Observe the local laws. Safety equipment. Always carry first aid equipment on the tractor. Also observe local laws concerning fire extinguishers. When working with hay or straw a fire extinguisher must be available at all times. Spare parts. For safety reasons use only original spare parts. If injury occurs when using non- original spare parts the Bush Hog warranty is invalidated. Maintenance. Take care that the machine is properly maintained and kept in good safe working condition. Never change the technical construction of the machine. 13 Model Kg ( lb.) HM2007 415 (915) HM2008 440 (970) HM2009 465 (1025) C C A B D 14 Safety instructions during crane lift Only use approved crane material. The machine must be in working position. Weight is stated on the drawing. Make sure that crane straps are securely fastened before lifting. Use a guide rope (not shown) to keep the machine in position. Be careful - make sure that nobody stand under or near the machine when it is being lifted. Fasten chain (A) on the machine as shown. Lift the machine in crane bracket (B). Use support rope, minimum 6 mm (1/4”) nylon rope at (C) and (D). 15 16 16 New Machine - be careful Read the directions for use. Great care must be taken, when starting up a new machine. Incorrect mounting, wrong operations, etc., can result in expensive repairs and loss of profits. Bush Hog’s factory warranty is voided if the instructions of this manual are not adhered to. NOTICE Be especially attentive to the following when starting a new machine. Check that the machine is mounted correctly, and that it is not damaged. Machines with hydraulic stabilizer: Be certain that the hydraulic hoses are mounted so that they are long enough to allow for cylinder movements. Be very careful when the machine is coupled to the tractor. If the coupling has not been carried out as explained in this manual the machine will not work correctly. Please note that the working height (A) is adjusted correctly. See page 24. Be very careful when fitting the PTO shaft. If the PTO shaft is too short or too long i...
Ce manuel est également adapté pour les modèles :Tondeuse à gazon - HM2007 (2.8 mb)
Tondeuse à gazon - HM2009 (2.8 mb)