Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
– Moving motion control levers outward (in slots) locks the drive system in neutral. • PTO Engagement Switch: Engages drive to PTO (mower deck). • Parking Brake Lever: Engages parking brake by pulling back. Seat • Type: Standard seat with high back, foam padded (internal suspension) and armrests and integral safety switch. Optional seat accessories for units with standard seats: – Custom ride suspension system to enhance Standard Seat. – Deluxe suspension seat with high back, low profile foam-in-place cushion (dampened, adjustable spring suspension), armrests, and integral safety switch. 14 Specifications • Mounting: Hinged to tilt up for access to hydraulic pumps, battery and other components. The seat is held in the tilted position with a linkage. Adjustable fore and aft seat track. • Armrests: Standard seat: foam padded flip-up armrests. Optional suspension seat: molded adjustable flip-up armrests. • Seat Safety Switch: Internal to the bottom seat cushion, non serviceable. Time delay module incorporated into the Safety Interlock System eliminates rough ground cut-outs. Hydrostatic Ground Drive System • Hydrostatic Pumps: Two Hydro Gear PR 16 cc variable displacement piston pumps. • Hydraulic Oil Type: Use Mobil 1 15W-50 Synthetic motor oil. • Hydraulic Oil Capacity: 5.2 qt (4.9 L) • Hydraulic Filter: Replaceable cartridge type. P/N 103-2146: 25 microns, No bypass • Speeds: 0-10.5 mph (16.9 km/hr) forward 0-6.6mph (10.6 km/hr) reverse • Drive wheel release valves allow machine to be moved when engine is not running. Tires & Wheels Drive Pneumatic (Air-Filled) (Standard) Pneumatic (Air-Filled) (Optional) Quantity 2 2 Tread AT101 TurfMate Size 24 x 12.00-12 23 x 10.50-10 Ply Rating 4 4 Pressure 9 psi(62 kPa) 13 psi (90 kPa) Caster Front Caster Rear Caster (Dual TailWheel) Semi-Pneumatic Semi-Pneumatic Quantity 2 2 Tread Smooth Smooth Size 9 x 3.50-4 13 x 6.5-6 Ply Rating Pressure Cutting Deck (Sold Separately) • Model Numbers: – FR524 – FR604 – FR724 • Cutting Width: – 52 inch (132 cm) – 60 inch (152 cm) – 72 inch (183 cm) • Discharge: Side • Blade Size: (3 ea.) – 52 inch Deck: 18.00 inches (45.7 cm) – 60 inch Deck: 20.50 inches (52.1 cm) – 72 inch Deck: 24.50 inches (62.2 cm) • Blade Spindles: Solid steel spindles with 1 3/4 inch (4.45 cm) I.D. bearings. • Deck Drive: “B”-Section belt from jackshaft on deck to blade spindles. • Deck: Full floating deck is attached to out-front support frame, removable for service. Six anti-scalp rollers provide maximum turf protection. Deck design allows for bagging, mulching or side discharge. • Deck Depth: – 52 inch Deck: 5.5 inches (14.0 cm) – 60 inch Deck: 5.5 inches (14.0 cm) – 72 inch Deck: 5.5 inches (14.0 cm) • Cutting Height Adjustment: Adjusts from 1 1/2 inches (3.8 cm) to 5 inches (12.7 cm) infinitely variable. 15 Specifications • Mulching Kit: Optional Curb Weight: • Bagger: Optional Dimensions Overall Width: Without deck 1163 lb (528 kg) 52 inch Deck 1555 lb (705 kg) 60 inch Deck 1600 lb (726 kg) 72 inch Deck 1660 lb (753 kg) 52 inch 60 inch 72 inch Deck Deck Deck Without 49.0 inches 49.0 inches 53.0 inches Deck (124.5 cm) (124.5 cm) (135 cm) Deflector 53.3 inches 61.4 inches 73.4 inches Up (135.4 cm) (156 cm) (186 cm) Deflector 64.0 inches 72.0 inches 84.3 inches Down (163 cm) (183 cm) (214 cm) Torque Requirements Overall Length: Bolt Location Torque Wheel Lug Nuts 90-95 ft-lb (122-129 N-m) Wheel Motor Mounting Bolts 72-77 ft-lb (98-104 N-m) Wheel Hub Lock Nut 210-250 ft-lb (285-339 N-m) Rollover Protection System (Roll Bar) Mounting Bolts 30-35 ft-lb (41-47 N-m) Clutch Retaining Bolt (secured with threadlocker) 55-60 ft-lb (75-81 N-m) Without deck and floor pan folded 82.3 inches (209.0 cm) 52 inch Deck 114.3 inches (290.3 cm) 60 inch Deck 114.3 inches (290.3 cm) 72 inch Deck 114.3 inches (290.3 cm) Overall Height: Roll Bar -Up Roll Bar -Down 69.2 inches (175.8 cm) 50.7 inches (128.8 cm) Tread Width: (Center to Center ofTires, Widthwise) 52 inch Deck 60 inch Deck 72 inch Deck 41.4 inches 41.4 inches 45.4 inches (105.2 cm) (105.2 cm) (115.3 cm) Wheel Base: (Center of Caster Tire toCenter of Drive Tire) 51.2 inches (130.0 cm) Minimum Turning Radius 55.25 inches (140.3 cm) 16 Operation Product Overview Figure4 1.FuelCap4.SeatBelt 2.RollBar5.MotionControlLever 3.Controls6.ParkingBrakeLever Operation Note: Determine the left and right sides of the machine from the normal operating position. Controls Motion Control Levers The motion control levers located on each side of the console control the forward and reverse motion of the machine. The levers control the flow of hydraulic oil from the hydrostatic pump to the drive wheel motor for each side. Moving the levers forward or backward turns the wheel on the same side forward or in reverse. Wheel speed is proportional to the amount the lever is moved. Moving the levers outward from the center position into the T-slot locks them in the neutral position (Figure 6). Throttle Control Located on right fuel tank console. T...