Log:
Évaluations - 4, GPA: 4.5 ( )

Instructions Bolens, Modèle ES 500

Fabricant : Bolens
Taille : 547.12 kb
Nom Fichier : d62eb023-5447-448b-a36d-9863d4cb8ef3.pdf
Langue d'enseignement: iten
Aller à la télécharger



Facilité d'utilisation


3. Check the Lawn Scarifier for damage and have it repaired if necessary. GB Correct aerating: 4. Assembly The Lawn Scarifier can be used for removing matting and moss in the lawn and thatch. To maintain a well-cared-for lawn we recommend aerating every 4 -6 weeks depending on the state of your lawn. v First of all, mow your lawn to the length you require. We particularly recommend this if the grass has grown tall (e.g.while you were away on holiday). Recommendation: the shorter you mow your lawn, the easier it is to aerate, thus lessening the strain on the Lawn Scarifier and increasing the lifetime of the aerator cylinder. Staying too long in one place with the machine running or scarifying when the ground is wet or too dry can damage the turf. v For good results, guide the Lawn Scarifier at an appropriate speed in strips as straight as possible across your lawn. To avoid leaving any gaps during aerating, the strips should touch. v Always guide the Lawn Scarifier at an even speed depending on the type of ground. v When working on inclines always stand diagonally to the incline in a sturdy, safe stance. Do not work on extremely steep slopes. Danger of tripping! To prevent tripping take particular care when moving backwards and when pulling the Lawn Scarifier. When aerating areas of very mossy lawn we recommend re-sowing the lawn after aerating. This helps the areas of lawn which were replaced by moss to regenerate quicker. V Do not place the connecting cable 8 under strainA during assembly. Assembling the handle: 1. Insert the two lower sections of the upright 5 (with the end with the round hole) in the mountings in the motor casing 6 and secure with the crosshead screws 9. 13 5. Operation 39651240873965124087 2. Insert the two locking bolts 1 from outside through the holes in the two central sections 2 of the upright and secure to the lower sections of the upright 5 with two wing nuts 4. 3. Screw the upper part of the upright with starting handle 3 to the central sections of the upright 2 with two more locking bolts 1 and the wing nuts 4. Thiscompletestheassemblyofthehanle. Warning: Fit the upper section of the upright with starting handle 3 in such a way that the plug 7 with the power cable 8 is on the right side (in direction of movement) (see fig.). 4. Attach connection cable 8 to the handle with the two cable clips 0. GB Connecting to power sypply: 0A712 Starting Lawn Scarifier: 3BC 1. Push connector of extension cable 0 on to the plug 7. 2. Draw a loop of the extension cable 0 through the cable strain relief device A 1 and suspend in position 2. This prevents inadvertent disconnection of the plug and socket connection. 3. Insert extension cable 0 into a mains socket. Danger of injury if the Lawn Scarifier does not switch off automatically! V Do not remove or bridge safety devices fitted to the Aerator (e.g. by tying the starting lever to the upper handle)! A A Danger! The Scarifier does not stop immediately after the motor has been switched...

Ce manuel est également adapté pour les modèles :
Tondeuse à gazon - ES 500 (547.12 kb)
Tondeuse à gazon - ES 500 (547.12 kb)
Tondeuse à gazon - ES 500 (547.12 kb)
Tondeuse à gazon - ES 500 (547.12 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories