Évaluations - 2, GPA: 4 ( )

Fabricant : Garmin Taille : 844.39 kb Nom Fichier : Langue d'enseignement:

CAUTION The Auto Guidance feature of the BlueChart g2 Vision data card is based on electronic chart information. That data does not assure obstacle and bottom clearance. Carefully compare the course to all visual sightings and avoid any land, shallow water, or other obstacles that may be in your path. When using Go To, a direct course and a corrected course may pass over land or shallow water. Use visual sightings and steer to avoid land, shallow water, and other dangerous objects. Note: Auto Guidance is available with a preprogrammed BlueChart g2 Vision data card. 1. From the Home screen, select Where to? > offshore Services. 2. Select the marine service category to which you want to navigate. The chartplotter shows a list of the 50 nearest locations and the distance and bearing to each. 3. Select a destination. Marking Your Present Location as a Waypoint From the Home screen, select Mark. Creating a Waypoint at a Different Location 1. From the Home screen, select Information > User Data > Waypoints > New Waypoint > Move. 2. Indicate the location of the waypoint: • Select Use Chart to move the waypoint while viewing a chart. For the GPSMAP 6000 series, use the Rocker to select a new location on the chart. For the GPSMAP 7000 series, touch a new location on the chart. Select Move Waypoint. • Select enter Position to move the waypoint using coordinates. For the GPSMAP 6000 series, use the Rocker to enter the coordinates of the new location. For the GPSMAP 7000 series, use the on-screen keyboard. Select Done. Marking and Navigating to an MOB Location When you mark a waypoint, you can designate it as a man overboard (MOB) location. From any screen, select Mark > Man overboard. An international MOB symbol marks the active MOB point and the chartplotter sets a course back to the marked location using the Go To feature. Man Overboard Selecting a Combination 1. From the Home screen, select Combinations. 2. Select a combination. Customizing the Combinations Screen Note: You can choose from only the options available to your chartplotter. To increase the number of screens available, use a BlueChart g2 Vision data card or add network devices such as sonar and radar. 1. From the Home screen, select Combinations. 2. Select a combination. 3. Select Menu > Change Combination. 4. Complete an action: Combination • Select Functions to select the screen 1 number of combination screens. Select a number. Combination • Select Layout > Vert. to arrange screen 2 the screens in a vertical layout. Data bar • Select Layout > Horiz. to arrange the screens in a horizontal layout. • Select Data Bar > on to show the horizontal bar that contains the data fields. • Select a numbered option, such as 1. Nav Chart or 2. Sonar in the image above, to change the type of information shown in the corresponding screen. 5. Select Done. tIP: Select Next Page to view additional information or to show the location on a chart. 4. Select Navigate to. 5. Complete an action: • Select Go to to navigate directly to the location. • Select Route to to create a route to the location, including turns. • Select Guide to to use Auto Guidance. 6. Review the course indicated by the magenta line. Note: When using Auto Guidance, a gray line within any part of the magenta line indicates that Auto Guidance cannot calculate part of the Auto Guidance line. This is due to the minimum safe water depth and the minimum safe obstacle height settings. 7. Follow the magenta line, steering to avoid land, shallow water, and other obstacles. Go to for additional documentation and information. Garmin®, the Gamin logo, GPSMAP®, BlueChart®, and g2 Vision® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express permission of Garmin. © 2009 Garmin Ltd. or its subsidiaries November 2009 Part Number 190-01120-01 Rev. A Printed in Taiwan ...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :