Évaluations - 4, GPA: 4.3 ( )

Fabricant : Garmin Taille : 4.88 mb Nom Fichier : GPSMAP6008_OwnersManual.pdf Langue d'enseignement:

Note: When using Auto Guidance, a gray line within any part of the magenta line indicates that Auto Guidance cannot calculate part of the Auto Guidance line. This is due to the minimum safe water depth and the minimum safe obstacle height settings (page 59). 8. Follow the magenta line, steering to avoid land, shallow water, and other obstacles. Browsing for and Navigating to a Saved Waypoint . CAUTION The Auto Guidance feature of the BlueChart g2 Vision data card is based on electronic chart information. That data does not assure obstacle and bottom clearance. Carefully compare the course to all visual sightings and avoid any land, shallow water, or other obstacles that may be in your path. When using Go To, a direct course and a corrected course may pass over land or shallow water. Use visual sightings and steer to avoid land, shallow water, and other dangerous objects. Before you can browse a list of waypoints and navigate to them, you must create and save at least one waypoint (page 34). GPSMAP® 6000/7000 Series Owner’s Manual Where To? 1. From the Home screen, select Where to? > Waypoints. 2. Select a waypoint. 3. Select Navigate to. 4. Complete an action: • Select Go to. • Select Route to. • Select Guide to to use Auto Guidance. 5. Review the course indicated by the magenta line. Note: When using Auto Guidance, a gray line within any part of the magenta line indicates that Auto Guidance cannot calculate part of the Auto Guidance line due to the minimum safe water depth and the minimum safe obstacle height settings (page 59). 6. Follow the magenta line, steering to avoid land, shallow water, and other obstacles. Browsing for and Navigating a Saved Route Before you can browse a list of routes and navigate to one of them, you must create and save at least one route (page 37). 1. From the Home screen, select Where to? > Routes. 2. Select a route. 3. Select Navigate to. 4. Complete an action: • Select Forward to navigate the route from the starting point used when the route was created. • Select Backward to navigate the route from the destination point used when the route was created. A magenta line appears. In the center of the magenta line is a thinner purple line that represents the corrected course from your current location to the destination. The corrected course is dynamic, and it moves with your boat when you are off course. 5. Review the course indicated by the magenta line. 6. Follow the magenta line along each leg in the route, steering to avoid land, shallow water, and other obstacles. Note: If you are off course, follow the purple line (corrected course) to go to your destination, or steer back to the magenta line (direct course). Browsing for and Navigating Parallel to a Saved Route Before you can browse a list of routes and navigate to one of them, you must create and save at least one route (page 37). 1. From the Home screen, select Where to? > Routes. 2. Select a route. 3. Select Review > Navigate to. 4. Select offset to navigate parallel to the route, offset from it by a specific distance. GPSMAP® 6000/7000 Series Owner’s Manual Where To? 5. Select offset. 6. Enter the offset distance: • For the GPSMAP 6000 series, use the Rocker or Numeric Keypad. • For the GPSMAP 7000 series, use the on-screen keyboard. 7. Select Done. 8. Indicate how to navigate the route: • Select Forward - Port to navigate the route from the starting point used when the route was created, to the left of original route. • Select Forward - Starboard to navigate the route from the starting point used when the route was created, to the right of the original route. • Select Backward - Port to navigate the route from the destination point used when the route was created, to the left of original route. • Select Backward - Starboard to navigate the route from the destination point used when the route was created, to the right of original route. A magenta line appears. In the center or the magenta line is a thinner purple line that represents the corrected course from your current location to the destination. The corrected course is dynamic, and it moves with your boat when you are off course. 9. Review the course indicated by the magenta line. 10.Follow the magenta line along each leg in the route, steering to avoid land, shallow water, and other obstacles. Note: If you are off course, follow the purple line (corrected course) to go to your destination, or steer back to the magenta line (direct course). Browsing for and Navigating a Recorded Track Before you can browse a list of tracks and navigate to them, you must record and save at least one track (page 40). 1. From the Home screen, select Where to? > tracks. 2. Select a track. 3. Select Follow track. 4. Complete an action: • Select Forward to navigate the track from the starting point used when the track was created. • Select Backward to navigate the track from the destination point used when the track was created. 5. Review the course indicated by the colored line. 6. Fo...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :