Évaluations - 2, GPA: 3.5
(
)
)
|
Photos et spécifications Garmin GPSMAP 4008 |
Par ce dispositif a également d'autres instructions :
Sounders - GPSMAP 4008 (812.64 kb)
Sounders - GPSMAP 4008 (879.11 kb)
Sounders - GPSMAP 4008 (5.83 mb)
Facilité d'utilisation
This view is helpful when navigating tricky shoals, reefs, bridges, or channels, and is beneficial when trying to identify entry and exit routes in unfamiliar harbors or anchorages. Mariner’s Eye 3D Navigation Chart Press the RANGE (+) key (GPSMAP 4000 series) or touch the key (GPSMAP 5000 series) to move the view closer to your boat and lower to the water. Press the RANGE (-) key (GPSMAP 4000 series) or touch the key (GPSMAP 5000 series) to move the view away from the boat. Mariner’s Eye 3D Settings To access additional settings or options from the Mariner’s Eye 3D screen, press MENU. Colors—selects between Normal (Default), Water Hazard, and All Hazard. The Normal setting shows the land as seen from the water. The Water Hazard setting indicates shallow water and land with a color scale. Blue indicates deep water, yellow is shallow water, and red is very shallow. The Water Hazard setting indicates land in green and brown, and the All Hazard setting shows land as dark red. Mariner’s Eye 3D, Normal Colors Mariner’s Eye 3D, Hazard Colors Safe Depth—adjusts the depth at which red indicates shallow water. This also changes the global Safe Depth setting as it applies to the Auto Guidance feature. Rings, tracks, Lane Width, and Show Radar—see “Mariner’s Eye Settings” on page 8. 2 GPSMAP® 4000/5000 Series Owner’s Manual Using Charts Using Fish Eye 3D Using the depth contour lines of the BlueChart g2 Vision cartography, Fish Eye 3D provides an underwater view of the sea floor or lake bottom. Use the RANGE keys (GPSMAP 4000 series) or the and keys (GPSMAP 5000 series) to adjust the view. Fish Eye 3D Fish Eye 3D Settings To access additional settings or options for the Fish Eye 3D screen, press MENU. Sonar Cone—turns a cone on or off that shows the area covered by your transducer. Sonar Data—visually shows the sonar readings received by your transducer for the best combination of sonar and mapping. tracks—turns the track log on or off. Overlay Numbers—shows or hides cruising, navigation, fishing, sailing, or fuel numbers. Using Fishing Charts Use the Fishing chart for a detailed, unobstructed view of the bottom contours and depth soundings on the chart. Fishing Chart Navigation Chart USinG ChartS The Fishing chart uses detailed bathymetric data on a preprogrammed BlueChart g2 Vision SD card, and is best for offshore deep-sea fishing. GPSMAP® 4000/5000 Series Owner’s Manual 3 USinG ChartS Using Charts Enabling High-Resolution Satellite Imagery You can overlay high-resolution satellite images on the land, the sea, or both portions of the Navigation chart when using a preprogrammed BlueChart g2 Vision SD card. To enable satellite imagery: 1. While viewing the Navigation Chart, press MENU. 2. Select Chart Setup > Appearance > Photos. 3. Select one of the following: • Off—standard chart information is shown on the map. • Land Only—standard chart information is shown on water with photos overlaying the land. • Blend—photos overlay both the water and the land at a specified opacity. The higher you set the percentage, the more the satellite photos will cover both land and water. NOtE: When enabled, the high-resolution satellite images are present only at lower zoom levels. If you cannot see the high-resolution images in your BlueChart g2 Vision region, zoom in using the RANGE (+) key (GPSMAP 4000 series) or touch the key (GPSMAP 5000 series), or set the detail level higher. Photo Overlay Off Land Only Photo Overlay Blend at 50% Blend at 100% 4 GPSMAP® 4000/5000 Series Owner’s Manual Using Charts Viewing Aerial Photos Preprogrammed BlueChart g2 Vision SD cards contain aerial photographs of many landmarks, marinas, and harbors. Use these photos to help orient yourself to your surroundings or to acquaint yourself with a marina or harbor prior to arrival. NOtE: Use the RANGE (+/-) keys (GPSMAP 4000 series) or touch the and keys (GPSMAP 5000 series) to zoom in and out while viewing the aerial photo on the full screen. To access aerial photos from the navigation chart: Use the ROCKER (GPSMAP 4000 series) or touch the screen (GPSMAP 5000 series) to highlight a camera icon with the pointer, and select Aerial Photo or Review. Perspective Overhead Viewing Current Station Information If current stations are available in your BlueChart g2 Vision region, they appear on the navigation chart as highlighted arrows. These detailed icons show the speed and direction of the current at a glance. Select Review or the name of the station display a current graph. Detailed Road and POI Data BlueChart g2 Vision contains detailed road and POI data, which includes highly detailed coastal roads and points of interest (POIs) such as restaurants, lodging, local attractions, and more. For instructions on searching for, and navigating to, these POIs, see the “Where To?” section (page 18). Using Automatic Guidance Automatic Guidance automatically suggests routes based on available BlueChart g2 Vision chart information. USinG ChartS GPSMAP® 4000/5000 Series ...