Évaluations - 4, GPA: 4.5 ( )

Fabricant : Nintendo Taille : 164.26 kb Nom Fichier : AP-1.pdf Langue d'enseignement:

LEARNING MGT TRANSMITTERS MGT TRANSMITTER SUPERVISION SYSTEM TESTING ENTER MEMORY LOCATION NUMBER 999 TO LEARN MGT TRANSMITTER PRESS LEARN BUTTON OCCUPIED LIGHT WILL BLINK FOR 2 SECONDS IF MEMORY LOCATION IS EMPTY IF RECEIVER IS BEEPING EVERY FIVE SECONDS, PRESS #-1 TO DISPLAY THE MGT SUPERVISORY CODES (MULTIPLE CODES CAN BE DISPLAYED) "L" INDICATES A LOW MGT TRANSMITTER BATTERY "F" INDICATES AN MGT TAMPER OR LOOP FAULT CONDITION "S" INDICATES THAT HOURLY STATUS REPORTS HAVE NOT BEEN RECEIVED ACTIVATE A LEARNED TRANSMITTER AND VERIFY THAT THE ACCESS DEVICE OPERATES IF MGT OBSTACLE TRANSMITTER IS USED, RUN ACCESS DEVICE AND TRIGGER OBSTACLE SENSOR. VERIFY ACTIVATE THE MGT TRANSMITTER WHILE OCCUPIED LIGHT IS BLINKING FROM THE MGT FOR FOUR HOURS AFTER SERVICING FAULT, PRESS OPEN TO SILENCE BEEPER AND RESET THE RECEIVER DISPLAYS THAT ACCESS DEVICE REVERSES IF AN OPEN REQUEST PUSHBUTTON IS INSTALLED, PRESS IT AND VERIFY OCCUPIED LIGHT WILL LIGHT STEADY WHEN TRANSMITTER IS LEARNED NOTE: IF SUPERVISION SOUNDER IS NOT REQUIRED, SUSPEND MGT TRANSMITTER (#999). SUPERVISION CODES CAN STILL BE DISPLAYED. THIS WILL ALSO DISABLE THE REQUIREMENT OF PRESSING A TRANSMITTER TWICE TO TRIGGER THE ACCESS RELAY DURING A SUPERVISORY CONDITION. THAT THE ACCESS DEVICE OPERATES # KEY UTILITIES SPECIFICATIONS LINEAR LIMITED WARRANTY THESE HANDY UTILITY FUNCTIONS CAN SPEED SYSTEM Size: 10.5"W x 4.5"H x 2"D This Linear product is warranted against defects in material and workmanship for twelve (12) months. The Warranty Expiration Date is labeled on the product. This warranty extends only to wholesale customers who buy direct DISPLAYS THE MGT SUPERVISORY CODES PROGRAMMING AND MAINTENANCE Weight: 1.5 Lbs. Supply Voltage: 12-24 Volts AC or DC from Linear or through Linear’s normal distribution channels. Linear does not warrant this product to consumers. Consumers should inquire from their selling dealer as to the nature of the dealer’s warranty, if any. There are no obligations or liabilities on the part of Linear corporation for consequential damages arising out of or in connection with use or performance of this product or other indirect damages with respect to loss of DISPLAYS THE NUMBER OF EMPTY MEMORY LOCATIONS DISPLAYS THE NUMBER OF OCCUPIED MEMORY LOCATIONS DISPLAYS THE FIRST AVAILABLE EMPTY MEMORY LOCATION DISPLAYS THE VERSION NUMBER THE AP-1 FIRMWARE Operating Current: 250 Ma Maximum Operating Temperature Range: -22° to + 158° F (-30° to + 70° C) Sensitivity: -94 dBm Minimum Bandwidth (3 db): 4 MHz Typical Frequency: 318 MHz Relay Contact Rating: 1 AMP @ 24 Volts AC or DC property, revenue, or profit, or cost of removal, installation, or reinstallation. All implied warranties, including implied warranties for merchantability and implied warranties for fitness, are valid only until Warranty Expiration Date as labeled on the product. This Linear Corporation Warranty is in lieu of all other warranties express or implied. For warranty service on Linear equipment return pro...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :