Évaluations - 1, GPA: 4
(
)
)
|
Facilité d'utilisation
3 Features............................................................................... 3 Connecting the racing wheel...................................... 5 Using the racing wheel-advanced features ........... 9 Troubleshooting ............................................................11 Legal notices ...................................................................11 90-Day Limited Warranty............................................13 Introduction Congratulations on your purchase of the Rocketfish RF-GPS3009 PS3 wireless racing wheel. This racing wheel represents the state of the art in wireless racing wheel design and is designed for reliable and trouble-free performance. Safety Caution: Some medical studies have suggested that long periods of repetitive motion may be linked to certain types of physical discomfort or injuries. You should take frequent breaks during game play. If you feel aching, numbness, or tingling in your arms, wrists, or hands, consult a qualified health professional. • Do not use the racing wheel if you have respiratory, heart, or other physical ailments that limit your physical activity. If you have any doubts, consult with a qualified health professional. • The racing wheel is not intended for small children. The racing wheel may contain small pieces that should be kept away from small children because they may pose a choking hazard. • Do not disassemble any of the racing wheel components. Refer all servicing to qualified personnel only. • Do not place or store the racing wheel in a humid area and do not expose it to water or rain. • Use the racing wheel only as instructed. Read all instructions before operating the racing wheel. • Failure to follow these directions may void the warranty. Features •Four port LED indicator • HOME button to sync the racing wheel with the PS3 console • Compatible with all PS3 consoles, including US, Japanese, and European versions • Directional pad inputs: up (1), down (1), left (1), right (1), 45 degree (4) • Analog button inputs (4) • Digital button inputs: START, SELECT, R1, R2, L1, L2, L3, R3, and HOME • Low voltage alert and power saving feature (sleep mode and automatic off ) • Programmable buttons: foot pedals, L3, R3, and gear stick • Large and durable suction cups that firmly attach the racing wheel to a flat surface to make the racing wheel easy to operate • 270 degree steering angle • Foot pedal with springs that give you a realistic driving experience RF-GPS3009 Package contents • Wireless racing wheel •Foot pedals • Receiver • AA batteries (4) Button layout Left Gear L1L2L3R3R2R1OFFSELECTSTARTPOWERONHOMED-pad LED paddle Right paddle stick TriangleSquare Cross Circle Foot pedal and receiver 4321Brake Accelerator Port LEDs Connecting the racing wheel To connect the racing wheel: 1 Plug the receiver into the USB port #1 on the PS3 console, then turn onthe console. 4321 RF-GPS3009 2 Open the battery compartment on the bottom of the racing wheel, insert four AA batteries into the compartment, then close the compartment. Make sure that the + and – symbols on the batteries match the + and – symbols in the battery compartment. Warning: Make sure that you insert the batteries correctly. If the batteries are inserted incorrectly personal injury or damage to the racing wheel may occur. Bottom of racing wheel 3 Connect the foot pedal to the racing wheel, then turn on the power switch on the racing wheel. 4321OFFPOWERON LEDs 4 Press HOME to select the port the racing wheel is connected to. The corresponding LEDs light. HOME L1L2L3R3R2R1OFFSELECTSTARTPOWERONHOME4321LEDs LEDs Port 1 1 2 2 3 3 4 4 2+4 5 3+4 6 Note: If you unplug the racing wheel or restart the PS3 console, you must press HOME again to select the port. RF-GPS3009 Forcing a connection If you have more than one racing wheel connected to the PS3, you may need to force a wheel to connect with the PS3. To force a connection: 1 Connect the receivers to the PS3. 432143211st wheel 2nd wheel 2 Press SELECT and DOWN on the racing wheel at the same time. SELECT DOWN FC L1L2L3R3R2R1OFFSELECTARTPOWERHOME 4321 LEDs 3 Press FC on the receiver. The LED on the receiver lights solid. Thisindicates the forced connection has been made. Using the racing wheel-advanced features Programming the racing wheel To program the racing wheel: 1 Press and hold SELECT and START for three seconds. The LED turns on. 2 Press the button or move the controller for the item you want toprogram. The LED flashes. You can program the foot pedals, left paddle, right paddles, L3, R3, and the gear stick. 3 Press the source button ( , , , , L1, L2, R1, or R2). The LED turns off. Canceling a single programmed function To cancel a single programmed function: 1 Press and hold SELECT and START for three seconds. The LED turns on. 2 Press the button for the function you want to cancel. The LED flashes. 3 Press the function button again. The LED turns off and the function is canceled. Canceling all programmed functions To cancel al...