Évaluations - 3, GPA: 4 ( )

Fabricant : Sony Taille : 3.49 mb Nom Fichier : Langue d'enseignement:

button. The resolution displayed on the TV varies depending on the input Depending on the connector selected in step 2 and the resolutions connector and the type of cable used ( page 7). The highest resolution selected in step 5, this screen may not be displayed. you selected will be used for video output. Depending on the connector selected in step 2, this screen may not be displayed. 7 Select the type of TV, and then press the button. If you selected "Standard (NTSC)" or "480p" in step 5, a screen for selecting the TV screen size will be displayed. Adjust the setting to match the TV in use. If you selected "720p" or a higher resolution in step 5, the TV type will automatically be set to 16:9 and the screen for selecting the TV screen size will not be displayed. Getting started Setting up the PS3™ system 8 Confirm the settings, and then press the button. The video output settings will be saved on the system. 9 Adjust audio output settings. Continue on to adjust audio output settings. Adjust settings to match the TV or audio device in use. If you select "HDMI", you will have the option to choose "Automatic" or "Manual" on the next screen. In most cases, select "Automatic". If using a cable other than an HDMI cable to output audio from the TV, select "Audio Input Connector / SCART / AV MULTI". If using a digital optical cable to output audio, select "Digital Out (Optical)" and choose the output format on the next screen. 10 Confirm the settings, and then press the button. The audio output settings will be saved on the system. Hint You can adjust audio output settings under (Settings) (Sound Settings) "Audio Output Settings". US FR ES Basic operations 03 Turning the PS3™ system on and off Using a wireless controller Press the PS button. Turning off the system Press and hold down the PS button for PS button one second or longer. When the message "Turn Off the System" is displayed on the screen, select it, and then press the button. Hint Before using a wireless controller, you must first pair it with the system ( page 17). Using the system button 1 Touch the power button. Power indicator status System off (in standby mode) Solid red Off Main power switch off 2 Press the PS button of the wireless controller. A controller number is assigned. Turning off the system Power button Power indicator System turned on Solid green Touch the power button for two seconds Flashing green System turning off or longer. Notice Do not use the main power switch on the system rear to turn off a system that is not in standby mode (power indicator red), as doing so may cause data loss or damage to the system. Basic operations 04 Using the wireless controller Preparing for use To use a wireless controller, you must first register or "pair" the controller with the PS3™ system and assign a number to the controller. Step 1: Pair the system and the controller. • When using for the first time • When using with a different PS3™ system m Step 2: Assign a controller number. Every time the system is turned on Step 1: Pair the system and the controller When using the controller for the first time or when using with a different PS3™ system, you must first pair the devices. If you turn on the system and connect the controller using a USB cable, the pairing will be completed automatically. USB cable (supplied) Check that the system is turned on (power indicator is lit solid green). Step 2: Assign a controller number Each time you turn on the system, a number must be assigned to the controller. 1234Press the PS button. All of the port indicators flash. When the controller has been assigned a number, the port indicators for the assigned number turn solid red. 1234mYou can connect up to 7 controllers at one time. The controller number is shown by the number above the port indicators. For numbers 5-7, add the numbers of the lit indicators. Example: Controller number 5 has been assigned. 11234 Hints • Pairing and assigning controller numbers can only be done when the system is turned on (power indicator is lit solid green). • When a paired controller is used with another PS3™ system, the pairing with the original system is cleared. Pair the controller with the system again if the controller has been used with another system. • If the controller or the system is turned off, the port indicators of the controller ES FR US will turn off and the assigned number will be cleared. Basic operations Using the wireless controller Using the controller wirelessly If you disconnect the USB cable, you can use the controller wirelessly. To use it wirelessly, the controller's battery must be charged. Hints • The USB cable can be connected or disconnected while the controller and the system are turned on. • If the controller does not function, press the PS button, and then reassign the controller number. Charging the controller With the system turned on (power indicator is lit solid green), connect the controller to the system using a USB cable. The port indicators of th...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :