Évaluations - 5, GPA: 3.6
(
)
)
|
Facilité d'utilisation
Hint For details on the wireless controller, see "Using the SIXAXIS™ wireless controller" ( page 17). Notice Some PlayStation® and PlayStation®2 peripherals such as the analog controller (DUALSHOCK®) and analog controller (DUALSHOCK®2) are not compatible with the PS3™ system. For details, visit US FR ES Getting started 02 Setting up the PS3™ system Procedure fl ow for setting up the system Step 1: Connect to a TV. Page 6 m Step 2: Connect digital audio devices. Page 9 m Step 3: Connect an Ethernet cable. Page 10 m Step 4: Connect the AC power cord. Page 11 m Step 5: Perform initial setup of the system software. Page 11 Step 1: Connect to a TV Video output on the PS3™ system The PS3™ system can output two types of resolution: HD and SD. Refer to the instruction manual for the TV in use to check which video mode is supported. HD (High Defi nition) SD (Standard Defi nition) Video mode *1 1080p 1080i 720p 480p 480i *2 Aspect ratio 16:9 16:9 16:9 16:9 4:3 16:9 4:3 *1 This number indicates the number of scan lines. Note that "i" stands for "interlace" and "p" stands for "progressive". Using progressive results in high-quality video with minimal flickering. *2 The video output setting on the system will display as "Standard (NTSC)". Screens showing the difference in resolution HD screen SD screen Getting started Setting up the PS3™ system Video output cable types The resolution displayed on the TV varies depending on the input connectors on the TV and the type of cable in use. Select a cable to match the TV in use. Cable type Input connector on the TV Supported video modes *1 HDMI cable HDMI IN connector 1080p / 1080i / 720p / 480p (sold separately) Component AV cable Component VIDEO IN (sold separately) connector COMPONENT VIDEO IN AUDIO IN Y PB/CB PR/CR L R 1080p / 1080i / 720p / 480p / 480i*2 S VIDEO cable S VIDEO IN connector SVIDEOL-AUDIO-R 480i*2 (sold separately) AV cable VIDEO IN connector VIDEOL-AUDIO-R 480i*2 (supplied) (composite) *1 Depending on the type of TV or content to be played, some video modes may not be supported. If a device that is not compatible with the HDCP (High-bandwidth Digital Content Protection) standard is connected to the system using an HDMI cable, video and/or audio cannot be output from the system. Copyright-protected Blu-ray video discs can only be output at 1080p using an HDMI cable connected to a device that is compatible with the HDCP (Highbandwidth Digital Content Protection) standard. *2 The video output setting on the system will display as "Standard (NTSC)". US FR ES Getting started Setting up the PS3™ system Connection methods Caution • Do not plug the AC power cord for the system into an electrical outlet until you have made all other connections. Make sure the TV or other component is unplugged from the electrical outlet prior to connecting it to the system. • Any TV or component connected to the system must be functioning properly and free of defects. If a TV or component connected to the system is faulty or defective, it may cause damage to the TV or component, or to the system itself. • The socket-outlet shall be installed near the equipment and shall be easily accessible. Connecting to a TV using an HDMI cable Connect the system to the TV using an HDMI cable (sold separately). An HDMI cable can output both video and audio and enables you to enjoy digital-quality video and audio with minimal loss of picture quality. HDMI OUT connector TV HDMI cable (sold separately) HDMI IN connector Connecting with other types of cables Connect cables other than the HDMI cable to the AV MULTI OUT connector on the system. VIDEOAUDIOLRTV AV cable (supplied) AV MULTI OUT connector VIDEO IN connector Example: When using the supplied AV cable Hint If you change the type of cable used to connect the system, video may not be displayed. If this happens, turn off the system and then turn it on again by touching the power button on the system front for at least five seconds (until the system beeps twice). The video output setting will then be reset to the standard resolution. Getting started Setting up the PS3™ system Step 2: Connect digital audio devices Connecting with an optical cable You can connect audio devices that support digital audio output, Audio will be output from the optical cable. Video will be output from such as an AV receiver for home entertainment use. the video output cable. US FR ES Hint When connecting a digital audio device to the system, go to (Settings) (Sound Settings) "Audio Output Settings", and then adjust the settings as necessary for the audio device. Audio output on the PS3™ system The supported channels may vary depending on the output connector to be used. PS3™ system output connectors AV MULTI OUT connector Channels that can be used for output 2 Ch. . 5.1 Ch. . 7.1 Ch. . Digital out (optical) connector . . . HDMI OUT connector . . .*1*2 Optical cable for audio (sold separately) Video output cable for the TV in use ( page 7) *...
Ce manuel est également adapté pour les modèles :Consoles de jeux - 40GB Playstation 3 3-285-687-11 (3.4 mb)