Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
If a user password is required, keep the key (‘search’, ‘play’, ‘rw’, ‘ff, or ‘rec’) pressed whilst entering the password. Alternately, press and hold the ‘Fn’ key, then press the number keys Press the ‘search’ key to bring up the ‘search’ menu. Press the key again to exit the ‘search’ menu. Press the ‘counter’ key to toggle the DVR display between displaying or not displaying the remaining storage capacity. To increase the speed of rewind or fast forward, press the ‘rew’ or ‘ff’ key up to four times to reach the maximum speed. Alternately, if the DVR is in ‘playback’ mode, press and hold the ‘Fn’ key and move the joystick right to play the video forwards or left to play the video backwards. The more the joystick is moved the faster the video is played. If the joystick is returned to the centre position or the ‘Fn’ key is released, the shuttle is returned to the centre position (and the playback is paused). If the DVR is paused in ‘playback’ mode, press and hold the ‘Fn’ key and move the joystick up to play the video forwards image-by-image or down to play the video backwards image-by-image. If the joystick is held up or down, the video is moved on to the next image (either forwards or backwards) every 0.5 seconds. Rev. 1.01 19 900.0570 8-Sept-05 4.8 ALARM FUNCTION If an alarm is active, press the ‘alarm’ key to reset the DVR’s outputs (including internal buzzer). If the DVR is in the live monitoring mode (and no alarm is active), press the ‘alarm’ key to display the event log. (Once in the event log, it is navigated in the same way as the menus as detailed in ‘4.3 DVR Menus’). Note: If user password is enabled on the DVR, then pressing the ‘alarm’ key will cause a user password screen to be displayed. If a user password is required, keep ‘alarm’ pressed whilst entering the password. Alternately, press and hold the ‘Fn’ key, then press the number keys. 4.9 SPOT FUNCTION To display a camera on the spot monitor, first press the ‘monitor’ key, then press one or two of the number keys (to enter a legal camera number) followed by the ‘camera’ key to select that number camera for display on the spot monitor. Press ‘monitor’ then ‘sequence’ to put the spot monitor into a camera sequence. Rev. 1.01 20 900.0570 8-Sept-05 Rev. 1.01 21 900.0570 8-Sept-05 SECTION 5: MULTIPLEXER CONTROL FUNCTIONS 5.1 MULTIPLEXER MODE Press the ‘mode’ key to toggle between multiplexer and DVR mode. 5.2 MENUS Navigation around menus is achieved by using the function keys as indicated in the following table Key Function F1 (^) Up F2 (Ў) Down F3 (<) Left F4 (>) Right F5 (enter) Set F6 (menu) Esc Note: Menus are not accessible to users logged in as user level 2 (U2 displayed on the LCD). 5.2.1 Setup (Top) Menu To enter the multiplexer set-up menu press the ‘F1’ (‘^’) key twice to display: LIVE Playback Preview Setup Cancel Use the ‘F3’ (‘<’) or ‘F4’ (‘>’) keys to select ‘Setup’, then press ‘F5’ (‘enter’). Press the ‘F1’ (‘^’), ’F2’ (‘Ў’), ‘F3’ (‘<’) or ‘F4’ (‘>’) keys to move around the menu pages. Press the ‘F5’ (‘enter’) key to select an option within the menus. To exit the menus select ‘Exit’, and then press the ‘F5’ (‘enter’) key. Rev. 1.01 22 900.0570 8-Sept-05 5.2.2 Bottom Menu To enter the multiplexer bottom menu press the ’F2’ (‘Ў’), key twice to display: Full 2x2 3x3 4x4 PIP User Def1 User Def2 User Def3 User Def4 Cancel Use the ‘F1’ (‘^’), ’F2’ (‘Ў’), ‘F3’ (‘<’) or ‘F4’ (‘>’) keys to select the required option, then press ‘F5’ (‘enter’). 5.2.3 Pop Up Menu Pressing the ‘F1’ (‘^’), ’F2’ (‘Ў’), ‘F3’ (‘<’) or ‘F4’ (‘>’) keys in live screen mode will select a camera image (red border around image). Once the required image has been selected, press the ‘F5’ (‘enter’) to display: Live Cam Change… Zoom… Full Priority On Histogram On.. Panic Record On Freeze On Sequence Utilities Cancel Use the ‘F1’ (‘^’), ’F2’ (‘Ў’) keys to select the required option, then press ‘F5’ (‘enter’). 5.3 PICTURE CONTROL The following table indicates the keys used for picture control: Key Function display Display sequence Sequence freeze Freeze play Toggle VCR input search Digital Zoom Press the ‘display’ key to select the next display setting (in the cycle of ‘4x4’, ‘3x3’, ‘2x2’ and ‘PIP’ for a 16 way multiplexer, ‘3x3’, ‘2x2’ and ‘PIP’ for a 9 way multiplexer or ‘2x2’ and ‘PIP’ for a 4 way multiplexer). Press and hold the ‘Fn’ key, then press the ‘display’ key to cycle through the other cameras when displaying 2x2 and 3x3 displays. Press the ‘sequence’ key to put the multiplexer output into a sequence (the sequence depends on the current display mode and set-up). If the key is pressed again, the sequence stops (displaying the current step in the sequence). Press the ‘freeze’ key to freeze the current display. Press the key again to return to the ‘live’ picture(s). Rev. 1.01 23 900.0570 8-Sept-05 5.3 PICTURE CONTROL, CONTINUED Press the ‘play’ key to select the VCR input for display. (Pressing the key again will return the multiplexer to ‘live’ picture(s). Press ...
Ce manuel est également adapté pour les modèles :Consoles de jeux - HJZTP (845.75 kb)