Fabricant : Rhino Mounts
Taille : 21.74 mb
Nom Fichier : 3ce3f946-8fff-407d-a0bb-a398c8ab6261.pdf
|
Facilité d'utilisation
This manual is provided to give you the necessary operating and maintenance instructions for keeping your rotary cutter in top operating condition. Careful use and timely service saves extensive repairs and costly downtime losses. Please read this manual thoroughly. Understand what each control is for and how to use it. Rhino typically offers three types of shielding to protect the operator, passerby, livestock, and property from thrown objects... deflectors, single chain guards, and double chainguards. Shielding should be selected based on the intended use of the mower. Double chainguards or deflectors should be used for highway, right-of-way, parks or greenbelt mowing or all other mowing where human dwellings, vehicles, or livestock could be within 300 feet of the mower. Chainguards are more durable, provide a longer service life and require less maintenance and replacement than deflectors. Single chainguards may be sufficient for agriculture and other mower use only where passersby or property are not within 300 feet of the mower during operation. No shielding is 100% effective in preventing thrown objects. The possibility of injury and property damage from this hazard can be substantially reduce by selecting proper shielding, maintaining the mower and shielding in good operational condition, inspecting the area for foreign debris before mowing, operating the mower at a minimum cutting height of 4", and keep unprotected persons at a minimum distance of 300 feet from the mower at all times during operation. Safety is of primary importance to the owner/operator and to the manufacturer. Observe all safety precautions decaled on the machine and noted throughout the manual for safe operation of implement. If any assistance or additional information is needed, contact your authorized Rhino dealer. The owner/operator/dealer should know and understand the Safety Messages before assembly and be aware of the hazards of operating this cutter during assembly, use, and maintenance. The Safety Alert Symbol combined with a Signal Word, as seen below, is intended to warn the owner/operator of impending hazards and the degree of possible injury faced when operating this machine. Indicates an imminently hazardous situation that, if not avoided, WILL result in DEATH OR VERY SERIOUS INJURY. Indicates an imminently hazardous situation that, if not avoided, COULD result in DEATH OR SERIOUS INJURY. Indicates an imminently hazardous situation that, if not avoided, MAY result in MINOR INJURY. Identifies special instructions or procedures that, if not strictly observed, could result in damage to, or destruction of the machine, attachments or the environment. INTRODUCTION © 2011 Alamo Group Inc. INTRODUCTION Equipment Specifications INTRODUCTION Cutting Width 144” 540 PTO Transport Width 151” Blade Tip Speed Overall Width 151” Center 15,523 FPM Overall Length 130” (Lift), 168” (Pull) Cutting Height 2-12” Gearbox Rating HP Required (min) 70 HP (Lift), 55 HP (Pull) Center Gearbox 120 HP Cutting Capacity (max) 2” Outboard Gearbox 100 HP Weight 2142 lbs LImited Warranty 5 Year Tongue Weight 1100 lbs. Driveline Size CAT 4 Limited Warranty 1 Year TW144 01/11 Introduction Section 2-3 © 2011 Alamo Group Inc. INTRODUCTION TW144 01/11 Introduction Section 2-4 KEY OPERATION POINTS • Cutting performance and distribution are best when cutter is level from side to side and front to rear. • In extra heavy material, rear chains will allow better discharge and better distribution than solid rear bands. • Never operate the Mower below full PTO speed of 540 or 1000 rpm. • Corn should be cut at 5 to 6 mph. If full PTO rpm cannot be maintained, use one lower gear. Operating Noise Level/Sound Pressure The sound levels at the operator's ear from the attached machine (rotary cutter) are at least 10 dB(A) below the levels from typical Agricultural tractors used to power and transport this machine. Therefore, the Noise emission values given by the OEM of the Agricultural tractor used to power and transport this machine would be valid when this machine is attached to and operated by that Agricultural tractor in all OEM recommended applications. Warranty information In addition to the standard Limited Warranty shown on the facing page, Rhino also provides: 1. A FIVE-YEAR (60 months) LIMITED WARRANTY* on GEARBOX components provided they have been properly maintained† and have not been subjected to abuse or mis-use except as limited below. * WARRANTY LIMITATIONS - GEARBOX A. Warranty is ONE-YEAR (12 MONTHS) for Seals (After one year, seals are considered to be WEARING PARTS and replacement is the users' responsibility.) B. Users' Gearboxes may be rebuilt by Rhino or replaced by new or rebuilt Gearboxes at the option of Rhino. 2. ONE-YEAR (12 months) LIMITED WARRANTY** on the DRIVELINE components provided they have been properly maintained† and have not been subjected to abuse or mis-use. * *WARRANTY LIMITATIONS - DRIVELINE A. Warranty is ONE-YEAR (12 MONTHS) f...