Évaluations - 2, GPA: 3
(
)
)
|
Facilité d'utilisation
• Plug power cord in an outlet that can easily be reached. The plug is the primary electrical disconnect. • Make sure the electrical rating listed on the serial label (located near the power cord on the back of the shredder) matches the available electric power. • Do not place shredder near or over a heat or water source. While operating shredder • Keep hands and hanging objects (jewelry, ties, loose clothing, long hair, etc.) away from paper entry. • Keep children and pets away from the shredder. When not in use • Always turn off and unplug shredder. • Unplug before emptying basket. • Do not open shredder head: Danger of electric shock. Opening shredder head will void the warranty. NOTE: Do not use flammable synthetic oil, petroleum-based products or aerosols of any kind on or near product at any time. 3 4 EnglishSet-Up• Make sure the back of the shredder is at least 5 cm away from walls or furniture to ensure sufficient ventilation. • Open the cabinet door and pull the waste basket (D) completely out of the cabinet. • Put plastic waste bag in basket (sample bags provided). Allow bag edges to overhang. Contact Fellowes to order more bags (part # 36054). • Slide the waste basket into the cabinet and shut the cabinet door (A). • Plug the power cord into a convenient outlet. • Store use and care manual in slot (M) inside cabinet door (A). Operation Control Switches Control Switch (H) I AUTOMATIC Turns on the automatic-start sensor and the green Ready light. O OFF Turns off the automatic-start sensor and the green Ready light. R REVERSE Runs shredder in reverse mode. Press and hold to activate. Manual Forward Button (F) Runs shredder when button is held down. Troubleshooting Lights Ready Light (G) (Green) Shredder is in automat- ic start mode. Paper Jam (I) (Red) Shredder is jammed (e.g., too much paper fed at one time). Basket Full (J) (Red) Waste basket is full or paper has collected under cutting cylinders. Door Ajar (K) (Red) Cabinet door is open. For convenience and energy savings, your shredder is equipped with an automatic-start sensor (O). This means that when the control switch (H) is in the automatic [I] position, the shredder will start running when you put paper into it and stop a few seconds after the paper has passed through. CAUTION: The automatic-start sensor cannot tell the difference between paper and other objects. This feature can also be a hazard. Always turn off the shredder when it is not in use. Unplug the shredder if it will not be used for an extended period. To shred paper •Press the automatic [I] button. The green ready light (G) should turn on. • Feed paper straight into paper entry (B) releasing when the shredder begins shredding. To shred CDs (Model 220-2 only) • Feed one CD straight into CD entry (E) releasing when the shredder begins shredding. H F G JI K Troubleshooting Lights Ready Light (G) (Green) Shredder is in automat- ic start mode. Paper Jam (I) (Red) Shredder is jammed (e.g., too much paper fed at one time). Basket Full (J) (Red) Waste basket is full or paper has collected under cutting cylinders. Door Ajar (K) (Red) Cabinet door is open. For convenience and energy savings, your shredder is equipped with an automatic-start sensor (O). This means that when the control switch (H) is in the automatic [I] position, the shredder will start running when you put paper into it and stop a few seconds after the paper has passed through. CAUTION: The automatic-start sensor cannot tell the difference between paper and other objects. This feature can also be a hazard. Always turn off the shredder when it is not in use. Unplug the shredder if it will not be used for an extended period. To shred paper •Press the automatic [I] button. The green ready light (G) should turn on. • Feed paper straight into paper entry (B) releasing when the shredder begins shredding. To shred CDs (Model 220-2 only) • Feed one CD straight into CD entry (E) releasing when the shredder begins shredding. H F G JI K 5 EnglishTo empty waste basket If basket full light (J) is on, follow these steps until light turns off. •Press manual forward button (F) to finish shredding any paper in the paper entry. •Press the off [O] button. • Open the cabinet door (A) and pull out the waste basket (D). • Remove the full bag and replace with a new bag. • Slide the waste basket (D) into the cabinet and shut the cabinet door (A). •Press and hold the reverse [R] button for a few seconds to clear paper shreds that have collected under cutting cylinders. • Alternate between manual forward (F) and reverse [R] for a few seconds in each position. CAUTION: The shredder may be damaged if you alternate too rapidly between forward and reverse. • Unplug shredder, open cabinet door (A) and remove wastebasket (D). • Carefully clear any paper shreds that have collected on under side of paper entry (B). CAUTION: Model 220C-2 (confetti cut model) has exposed blades on underside of paper entry. Use care when removing paper shreds. To clear a p...
Ce manuel est également adapté pour les modèles :Jardin Déchiqueteuses - 220-2 (534.91 kb)