Évaluations - 3, GPA: 4.7
(
)
)
|
Facilité d'utilisation
Read the Installation, Operating and Maintenance Instructions thoroughly before installing or servicing this equipment. ! ! Initial heating of unit may generate smoke or fumes and must be done in a well ventilated area. Overexposure to smoke or fumes may cause nausea or dizziness. This equipment has been engineered to provide you with year-round dependable service when used according to the instructions in this manual and standard commercial kitchen practices. ANSI/NSF4 P/N 96100010 9/06Phone: +1 (214) 421-7366 Fax: +1 (214) 565-0976 Toll Free: +1 (800) 527-2100 APW WYOTT Website: 729 Third Avenue E-mail: info@apwwyott.com Dallas, TX 75226 1 IMPORTANT FOR FUTURE REFERENCE Please complete this information and retain this manual for the life of the equipment. For Warranty Service and/or Parts, this information is required. Model Number Serial Number Date Purchased TABLE OF CONTENTS SECTION ITEM PAGE SECTION ITEM PAGE 1 2 3 4 5 6 Owner's Information Safety InformationSpecificationsInstallation Instructions OperationCleaning 2 2 3 3 5 6 7 8 9 10 11 Troubleshooting Preventative Maintenance Schedule Wiring DiagramsParts List & Exploded View Warranty 6 7 7 10 12 ! WARNING: In Europe, appliance must be connected by an earthing cable to all other units in the complete installation and thence to an independent earth connection in compliance with EN 60335-1 and/or local codes ! ! WARNING: An earthing cable must connect the appliance to all other units in the complete installation and from there to an independent earth connection. ! 1. OWNER’S INFORMATION General Information: 1. Always clean equipment thoroughly before first use. (See general cleaning instructions). 2. Check rating label for your model designation and electrical rating. 3. For best results, use stainless steel countertops. General Operation Instructions: 1. All foodservice equipment should be operated by trained personnel. 2. Do not allow your customers to come in contact with any surface labeled “CAUTION HOT”. 3. Never touch ceramic or steel heaters. Warranty Information: Reliability Backed By APW Wyott’s Warranty: All APW Wyott Pass Through Ovens are backed by a one year parts and labor warranty, including On-Site Service calls within 50 miles of authorized service technicians. Service Information: Service Hotline (800) 733-2203 2. SAFETY INFORMATION APW Wyott equipment is designed, built and sold for commercial use and should be operated by trained personnel only. Clearly post all CAUTIONS, WARNINGS and OPERATING INSTRUCTIONS near each unit to insure proper operation and to reduce the chance of personal injury and/or equipment damage. This product is used for the cooking, defrosting or re-thermalization of food products only. Always disconnect power before servicing the unit. Surfaces will remain hot after power has been turned off. Allow unit to cool before cleaning or servicing. Never clean the unit by immersing it in water. The unit is not protected against water jets; DO NOT CLEAN PASS THROUGH OVEN WITH A WATER JET. Always clean equipment properly before first use. 2 3 3. SPECIFICATIONS OVERALL DIMENSIONS - XWAV 1417A D F G HI J K L A B C E L = A = 24.49” B = 21.00” C = 15.14” D = 18.00” E = 14.00” F = 11.80” G = 10.50” H = 17.25” I = 38.25” J = 3.84” K = 18.00” 4.00” Electrical ratings: Power Cord: Six (6) foot, 3 wire grounded cord. If the supply cord is damaged, the manufacturer, or an authorized service agent, must replace it in order to avoid a hazard and warranty. Please contact the factory by calling the 800 # located on the unit. Shipping Weight: XWAV 1417A 98 lbs. (44.5 kg.) MODEL WATTS VOLTS AMPS (1 Phase) NEMA PLUG 4100 208 19.7 6-30P 4100 240 17.1 6-30P XWAV 1417A 4. INSTALLATION INSTRUCTIONS If the carton appears damaged, or damage is discovered once the carton is opened, stop immediately and contact the freight company to file a damage claim. CAUTION: The Pass Through Oven is shipped assembled. The unit is shipped with urethane supports between the top heaters and the conveyor assembly. Please remove all urethane supports and packaging materials before operating the unit. Failure to remove all packaging materials may lead to a fire and / or damage to the appliance. ! ! 1. Remove all external packaging that is protecting top portion of unit. 2. Remove unit from shipping container while in the upright position. The unit can be lifted out of the carton by grasping under the conveyor on each side of the appliance. Please remove the plastic bag. 3. Remove all internal packaging to the unit. Important: Remove urethane supports located inside the tunnel oven between the top heaters and the conveyor. Remove tape from conveyor trays. Remove tape from extrusion corners. Remove tape from deflecting curtains located just above entrance and exit of conveyor. 4. Visually inspect all external and internal portions of unit for damage. Important: Inspect thetop white ceramic elements located inside the oven tunnel after removal of ...