Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
1A. OVEN EXTERIOR: (a) Deposits of baked-on splatter and grease, or discoloration may be removed with the stainless steel cleaner sample supplied or by using any commercial cleaner recommended for stainless steel. Bakers Pride offers a stainless steel cleaner expressly for this purpose. RINSE WELL (b) A thin coat of light oil will add to the appearance of the oven. NOTE: Apply stainless steel cleanser only when the oven is cold. Always rub with the grains and apply very light pressure. 1B. PAINTED SURFACES: a) Washing with mild soap and water solution is adequate to keep the painted surfaces clean. b) Apply a thin coat of oil to protect and enhance the finish 2. CONTROL PANEL: Every six months (more frequently if the oven is used heavily) the bottom door spring mechanism and all moving parts must be inspected for wear. Do not apply grease to spring lever shoulder bolt, spring roller or the door rod and the door pin. They have a self-lubricating insert that will be damaged if lubricated. 3. FLUE VENT: Ventilation system must be inspected every six months and maintained clean and free of obstructions. 4. OVEN INTERIOR: Clean the oven interior only when the oven is cold. Use only the detergent solutions and cleaners that meet the national and / or local codes. (a) BAKING CHAMBER: Clean the ceiling and the walls of the baking chamber with a mild soap and water solution. Do not use oven cleaners, caustic solutions or mechanical means as they will damage the interior aluminized surface. (b) BAKING DECKS: The baking decks are heavy and fragile. They should be handled carefully. The baking decks should be cleaned by using a long-handled scraper and stiff wire brush. At the end of each day, turn the thermostat up to its maximum setting and let the oven sit at that temperature for at least . hour. This will burn off the food spilled onto the baking decks during day’s production and turn it into ash. This ash can be brushed off the next day before turning the oven on. The baking decks should be scraped and brushed during the day also to help keep them clean. To remove excessive crumbs or carbon, the baking decks and the oven cavity may vacuumed when the oven is cold. Do not use water or other liquids on the baking decks as that may cause them to crack. After long use, heavily soiled baking decks may be cleaned by turning over after scraping down and brushing off. This will burn off the heavily soiled side of the baking decks. This procedure may be repeated as needed. (c) BURNER COMPARTMENT: Vacuum out any carbon, crumbs or residue in the burner compartment and all around the doors. The holes and louvers on the outer surfaces of the oven must be kept free of obstructions to allow free movement of air into the controls and for proper combustion. The burner ports and crossover holes should be kept free of carbon and other deposits. BAKERS PRIDE OVEN CO., INC. 30 Pine Street New Rochelle, NY 10801 (914) 576-0200 Phone (800) 431-2745 US & Canada (914) 576-0605 Fax Web Address ...
Ce manuel est également adapté pour les modèles :Fours électriques - 125 (297.65 kb)
Fours électriques - 300 (297.65 kb)
Fours électriques - 400 (297.65 kb)
Fours électriques - 600 (297.65 kb)