Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
ADVERTENCIA LEA Y SIGA TODAS LAS ADVERTENCIAS E INSTRUCCIONES EN ESTE MANUAL PARA EVITAR LESIONES PERSONALES, INCLUSO MUERTE O DANOS MATERIALES. SAVE THIS GUARDE ESTE MANUAL MANUAL FOR PARA REFERENCIA FUTURE REFERENCE FUTURA IMPORTANT SAFETY WARNINGS WE WANT YOU TO ASSEMBLE AND USE YOUR ROTISSERIE AS SAFELY AS POSSIBLE. THE PURPOSE OF THIS SAFETY ALERT SYMBOL IS TO ATTRACT YOUR ATTENTION TO POSSIBLE HAZARDS AS YOU ASSEMBLE AND USE YOUR ROTISSERIE. WHEN YOU SEE THE SAFETY ALERT SYMBOL PAY CLOSE ATTENTION TO THE INFORMATION WHICH FOLLOWS! READ ALL SAFETY WARNINGS AND INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING AND OPERATING YOUR ROTISSERIE. WARNING • Always check the grill prior to each use as indicated in the “Pre-Start Check List” section of the Charmglow® Owner’s Manual. • Keep children and pets away. DO NOT allow children to use or play near the grill or rotisserie. • DO NOT leave the grill unattended while in use. • DO NOT use the side burner when using a rotisserie. Burner lid could be hot from prior use. • To avoid body injury, DO NOT touch spit rod while in use or soon after use, rod can be EXTREMELY HOT. • Keep any electrical supply cords away from water or hot surfaces. • DO NOT operate with a damaged cord or plug. • Turn rotisserie motor switch to “OFF” before removing plug from outlet. • Unplug the rotisserie motor when not in use and before cleaning. • DO NOT exceed 12 lbs. of food on the rotisserie. • Keep a fire extinguisher acceptable for use with gas products close by. Refer to your local authority to determine proper size and type. • For household use only. DO NOT use the grill or this rotisserie for anything other than its intended purpose. • DO NOT use while under the influence of drugs or alcohol. • When using an AC current rotisserie, it must be electrically grounded in accordance with local codes, or in the absence of local codes: • In the US: The National Electrical Code – ANSI-NFPA No. 70 – Latest Edition • In Canada: the Canadian Electrical Code – CSA C22.1 USE CAUTION AND COMMON SENSE WHEN OPERATING YOUR GAS GRILL. FAILURE TO ADHERE TO THE SAFETY WARNINGS AND GUIDELINES IN THIS MANUAL COULD RESULT IN SEVERE BODILY INJURY OR PROPERTY DAMAGE. SAVE THIS MANUAL FOR FUTURE REFERENCE. ELECTRICAL GROUNDING INSTRUCTIONS: This appliance (rotisserie motor) is equipped with a three-prong (grounding) plug for your protection against electrical shock hazard. It should be plugged directly into a properly grounded three-prong receptacle. DO NOT cut or remove the grounding prong from this plug. ASSEMBLY INSTRUCTIONS READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING YOUR ROTISSERIE. READ THE OWNERS MANUAL TO THE GRILL BEFORE ASSEMBLING OR USING THIS ROTISSERIE. The following tools are required to assemble this ProSeries® Gas Outdoor Grill Rotisserie: • Phillips & Flathead Screwdrivers • Adjustable Wrench PARTS LIST: 1234 1 Motor 4 Screws 1 Spit Rod 1 Motor Mount Bracket 2 Forks 4 Nuts 1 Handle 1 Right Support Bracket 5678 3241657857 FOR MISSING PARTS, PLEASE CALLCUSTOMER SERVICE AT 800-527-0717. (Proof of purchase will be required.) Inspect contents of the box to ensure all parts are included and undamaged. ASSEMBLY STEPS Step 1 Open grill hood and remove cooking grills. Refer to your ProSeries™ owners manual. Step 2 Press the handle onto the end of the spit rod with the grooved section. Step 3 Attach the motor mount bracket on the left hand side of the grill using two screws and two nuts. Step 4 Attach the spit rod support bracket to the right hand side of the grill using two screws and two nuts. Handle Grooved Section READ ALL WARNINGS ON PAGE 1 AND IN THE OWNERS MANUAL TO THE GRILL. WARNING ELECTRICAL GROUNDING INSTRUCTIONS: This appliance (rotisserie motor) is equipped with a three-prong (grounding) plug for your protection against electrical shock hazard. It should be plugged directly into a properly grounded three-prong receptacle. DO NOT cut or remove the grounding prong from this plug. OPERATING THE ROTISSERIE: 1. Your grill was pre-drilled from the factory to include mounting holes for the ProSeries® Gas Outdoor Grill Rotisserie. 2. Install the rotisserie motor onto the motor mount bracket. 3. Ensure that the rotisserie motor is turned to “OFF.” Note: Rotisserie motor is capable of turning up to a 12 lb. cut of meat or poultry. 4. Place one fork onto the spit rod with the prongs facing away from the handle. Do not tighten set screw at this time. 5. Skewer meat with the spit rod and slide to the center of the rod. 6. Place second fork onto the spit rod with the prongs facing the meat. 7. Slide both forks tightly against the meat and securely tighten the fork set screws. 8. Check the balance of the food on the rod by rotating the loaded spit rod loosely in your hands. The rod should rotate evenly with little effort. Adjust the food on the spit to achieve a balanced assembly. 9. Place the loaded spit rod into the motor assembly and support bracket. 10. Clos...