Évaluations - 5, GPA: 3.6 ( )

Fabricant : Bosch Taille : 1.76 mb Nom Fichier : 945149EN.pdf Langue d'enseignement:

– If the appliance is deactivated and you set the Minute Minder. When the Minute Minder function ends, the display goes back to the night brightness. Cooling fan When the appliance operates, the cooling fan activates automatically to keep the surfaces of the appliance cool. If you deactivate the appliance, the cooling fan can continue to operate until the appliance cools down. 24 24 Care and cleaning Mechanical door lock The door lock is not active when you buy the appliance. To activate the door lock: Pull the door lock forward until it locks in place. To deactivate the door lock: Push the door lock back into the panel. Opening the appliance door: 1. Push and hold the door lock. 2. Open the door. Do not push the door lock when you close the appliance door. When you deactivate the appliance it does not deactivate the mechanical door lock. CARE AND CLEANING WARNING! Refer to "Safety information" chapter. Notes on cleaning: • Clean the front of the appliance with a soft cloth with warm water and cleaning agent. • To clean metal surfaces use a usual cleaning agent. • Clean the appliance interior after each use. Then you can remove dirt more easily and it does not burn on. • Clean stubborn dirt with a special oven cleaner. • Clean all accessories (with a soft cloth with warm water and cleaning agent) after each use and let them dry. • If you have nonstick accessories, do not clean them using an aggressive agents, sharp edged objects or dishwasher. It can cause a damage to the nonstick coating. Shelf support You can remove the shelf support to clean the side walls. Care and cleaning 25 Removing the shelf support 1. Pull the front of the shelf support away from the side wall. 2. Pull the shelf support from the back of the side wall to remove it. To install the shelf support follow the procedure in reverse. Valid with telescopic runners: The retaining pins on the telescopic shelf runners must point to the front! 12 Ceiling You can fold down the heating element on the ceiling to clean the ceiling easily. WARNING! Before you fold down the heating element, deactivate the appliance. Make sure that the appliance is cold. There is a risk of burns! Folding down the heating element 1. Remove the shelf supports. 2. Hold the heating element with the two hands at the front 3. Pull it forwards against the spring pressure and out along the support on both sides. 4. The heating element folds down. The ceiling is ready to clean. Installing the heating element 1. Install the heating element in opposite sequence. Install the heating element correctly on the two sides above the support on the inner wall of the appliance. 2. Install the shelf supports. 26 26 Care and cleaning Oven lamp WARNING! There is a risk of electrical shock. The oven lamp and the lamp glass cover can be hot. Before you change the oven lamp: • Deactivate the appliance. • Remove the fuses from the fuse box or deactivate the circuit breaker. CAUTION! Put a cloth on the bottom of the interior of the appliance. It prevents damage to the lamp glass cover and the cavity. Replacing the oven lamp: 1. You can find the lamp glass cover at the cavity ceiling. Turn the lamp glass cover counterclockwise to remove it. 2. Clean the glass cover. 3. If necessary, replace the oven lamp with applicable 300 °C heat-resistant oven lamp. Use the same oven lamp type. 4. Install the glass cover. Replacing the lamp: 1. You can find the lamp glass cover at the left side of the cavity. Remove the left shelf rail. 2. Use a narrow, blunt object (for example a teaspoon) to remove the glass cover. Clean the glass cover. 3. If necessary, replace the lamp with applicable 300°C heat-resistant lamp. Use the same lamp type. 4. Install the glass cover. 5. Install the left shelf rail. Door and glass panels To clean the door, remove it. CAUTION! Be careful when you remove the door from the appliance. The door is heavy! What to do if… 27 Removing the door 1. Open the door as far as it goes. 2. Fully press clamping levers (A) on the two door hinges. 3. Close the door until the first position (angle approximately 70°). 4. Hold of the door with one hand on each side and pull it away from the at an up angle. AA To install the door follow the procedure in reverse. The number of glass panels if different for the different models. CAUTION! Put the door with the outer side down on a soft and level surface to prevent scratches. Removing and cleaning the door glass panels 1. Remove the door. 2. Hold the door trim (B) on the top edge of the door at the two sides and push inwards to release the clip seal. 3. Pull the door trim to the front to remove it. 4. Hold the door glass panels on their top edge one by one and pull them up out of the guide 5. Clean the door glass panels. To install panels follow the procedure in reverse. Install the smaller panel first, then the larger. B WHAT TO DO IF… WARNING! Refer to "Safety information" chapter. 28 28 Technical data Problem Possible cause Solution The appliance does no...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :