Log:
Évaluations - 0, GPA: 0 ( )

Instructions Philips, Modèle HQ40

Fabricant : Philips
Taille : 269.83 kb
Nom Fichier :
Langue d'enseignement: enid
Aller à la télécharger



Par ce dispositif a également d'autres instructions :
électrique - HQ40 (220.16 kb)enda
électrique - HQ40 (353.15 kb)itesde
électrique - HQ40 (566.33 kb)
électrique - HQ40 (247.97 kb)enesfrnl

Facilité d'utilisation


4222 002 44233
ENGLISH
Important
◗ For extra thorough cleaning,
.
Cleaning and maintenance.
clean the shaving heads by putting
Read these instructions for use
Regular cleaning guarantees better
them in a degreasing liquid (e.g.
carefully before using the appliance
shaving performance.
alcohol) every six months. To
and save them for future reference.
◗ For easy and optimal cleaning,
remove the shaving heads, follow
◗ Keep the appliance dry (fig. 1).
the Philips Action Clean (shaving
steps 1 to 4 described above.
◗ Store and use the appliance at a
head cleaner, type HQ100) is
After cleaning, lubricate the
temperature between 5cC and
available. Ask your Philips dealer
central point on the inside of the
35cC.
for information (fig. 8).
guards with a drop of sewing
B
The Philips Action Clean may not be
machine oil to prevent wear of
Inserting batteries.
available in all countries. Contact
the shaving heads (fig. 17).
The appliance runs on two R6 AA
the Customer Care Centre in your
1.5-volt batteries. Preferably use
country about the availability of this
Storage.
Philips alkaline batteries.
accessory.
◗ Put the protection cap on the
shaver to prevent damage (fig. 7).
Make sure that your hands are dry
You can also clean the shaver in the
when inserting the batteries.
following way:
Replacement.
1 Remove the lid of the battery
Replace the shaving heads every two
Every week: shaving unit and
compartment (fig. 2).
years for optimal shaving results.
hair chamber
2 Place two batteries in the
Replace damaged or worn shaving
battery compartment (fig. 3).
1 Switch the shaver off.
heads with HQ4« Philips shaving
Make sure the + and - indications on
heads only.
2 Clean the top of the appliance
the batteries match the indications in
first, using the brush supplied
1 Switch the shaver off.
the battery compartment.
(fig. 9).
The shaver does not work if the
2 Press the release button (1)
batteries have been placed
3 Press the release button (1)
and remove the shaving unit (2)
incorrectly.
and remove the shaving unit (2)
(fig. 10).
(fig. 10).
3 Put the lid of the battery
3 Remove the retaining frame by
compartment back onto the
4 Clean the inside of the shaving
pushing the sides of the central
appliance. First insert the top
unit and the hair chamber with
spring towards each other (1)
part of the lid (1) and then press
the brush (fig. 11).
and lifting the retaining frame out
the bottom part down until you
of the shaving unit (2) (fig. 12).
5 Put the shaving unit back onto
hear a click (2) (fig. 4).
the shaver.
4 Slide the shaving heads out of
◗ To avoid damage due to battery
the retaining frame (fig. 13).
leakage:
Every two months: shaving
5 Slide new shaving heads into the
-
do not expose the appliance to
heads
retaining frame (fig. 16).
temperatures higher than 35cC;
-
remove the batteries if the
1 Switch the shaver off.
6 Put the retaining frame back into
appliance is not going to be used
the shaving unit (fig. 18).
2 Press the release button (1)
for a month or more;
and remove the shaving unit (2)
7 Put the shaving unit back onto
-
do not leave empty batteries in
(fig. 10).
the shaver.
the appliance.
3 Remove the retaining frame by
Accessories.
Cordless shaving time
pushing the sides of the central
The following accessories are
spring towards each other (1)
available:
Two new batteries offer a cordless
and lifting the retaining frame out
-
HQ4« Philips shaving heads.
shaving time of 60 minutes.
of the shaving unit (2) (fig. 12).
-
HQ100 Philips Action Clean
Using the appliance
4 Slide the shaving heads out of
(shaving head cleaner).
.
the retaining frame and clean
-
HQ101 Philips Action Clean refill
Shaving
them one by one (fig. 13).
(shaving head cleaning liquid).
Do not mix up the cutters and the
-
HQ110 Philips shaving head
1 Switch the appliance on by
guards.
cleaner (shaving head cleaning
pressing the switch lock and
This is essential since each cutter has
spray).
pushing the on/off slide upwards
been ground with its corresponding
(fig. 5).
guard for optimal performance. If you
Environment.
The switch lock prevents accidental
accidentally mix the sets up, it could
◗ Batteries contain substances that
switching on of the appliance.
take several weeks before optimal
may pollute the environment.
2 Move the shaving heads quickly
shaving performance is restored.
Always remove the batteries
over your skin, making both
before discarding the appliance
5 Clean the cutter with the
straight and circular movements
or handing it in at an official
short-bristled side of the brush
(fig. 6).
collection point. Dispose of the
(fig. 14).
Shaving on a dry face gives the best
batteries at an official collection
Brush carefully in the direction of the
results.
point for batteries.
arrow.
Your skin may need 2 or 3 weeks to
◗ Do not throw the appliance
get accustomed to the Philips shaving
6 Brush the guard (fig. 15).
away with the normal household
system.
waste at the end of its life, but
7 Slide the shaving heads back into
hand it in at an official collection
1 Switch the shaver off by pushing
the retaining frame and put the
point for recycling. By doing this
the on/off slide downwards.
retaining frame back into the
you will help to preserve the
shaving unit (fig. 16).
2 Put the protection cap on the
environment (fig. 19).
shaver every time you have used
8 Put the shaving unit back onto
it, to prevent damage (fig. 7).
the shaver.
2/8


...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories