Évaluations - 4, GPA: 3.8
(
)
)
|
Facilité d'utilisation
Do not use attachments not recommended by the manufacturer. 4. Never operate this appli- ance if it has a damaged plug, if it is not working properly, if it has been dropped or damaged. Return the appliance to a service center for examination and repair. 5. Never drop or insert any object into any opening. 6. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered. SAVE THESE INSTRUCTIONS 2 3 и 4 Index ENGLISH ESPAÑOL Page 6 Pagina 9 Before use This Wet/Dry shaver can be used for wet shaving with shaving lather or for dry shaving. You can use this watertight shaver in the shower and clean it in water. Treat yourself to wet lather shaves for at least three weeks and notice the difference. Your Panasonic Wet/Dry shaver requires a little time to get used to because your skin and beard need about a month to adjust to any new shaving method. Charge the shaver for at least 8 hours before using it for the first time or when it has not been in use for more than six months. Parts identification (see fig. 1) ® Protective cap (§) Outer foil © Foil frame © Inner blade © Foil frame release buttons (f) On/Off switch with lock button © Trimmer © Trimmer handle Ф Charge indicator lamp © Charging adaptor ® Travel pouch Charging (see fig. 2) Switch the shaver to the off or lock position and set it firmly into the charging adaptor. Keep the adaptor level. Plug the adaptor into an AC outlet. The charge indicator lamp will glow red and it will stay on until the shaver is removed from the adaptor. You can fully charge the shaver in 8 hours if it seems to be losing speed. A full charge will supply enough power for about 7 shaves (three minutes per shave for a normal beard). Before travelling, charge it fully for 8 hours if you will not be taking the charging adaptor with you. For a better shave Put a thin layer of shaving foam on your face which works as lubricator. Shaving foam is the most suitable among many other shaving aids(gel, soap, cream, etc). Do not put a thick layer of shaving foam as it becomes messy. If the shaving head is clogged with foam, simply rinse it under running water. Slide the On/Off switch upward to release the lock. Next, slide the On/Off switch to the left to turn the shaver on (see fig. 3). Hold the shaver at a right angle (90°) to your skin (see fig. 4). Start out shaving by applying gentle pressure to your face. Stretch your skin with your free hand and move the shaver back and forth in the direction of your beard. You may gently increase the amount of pressure as your skin becomes accustomed to this shaver. Applying excessive pressure does not provide a closer shave. Using the trimmer (see fig. 5) Shaving longer, curly hairs under the chin (see fig. 5A) Slide the trimmer handle up to the mm 1 position. This position makes the trimmer an intercept cutter, cutting long hairs while the outer foil shaves shorter hairs. Make sure that the trimmer is facing outward away from the neck. Trimming sideburns (see fig. 5B) Slide the trimmer handle up to the mm 2 position. Place the trimmer at a right angle to your skin and move it downward to trim sideburns. Cleaning your shaver (see fig. 6) For cleanliness and convenience, we recommend that you clean your shaver with water and a liquid hand soap. Regular cleaning will keep your shaver in good condition while preventing odors or bacteria from developing, and maintain the cutting performance. With the outer foil in place, apply some hand soap onto the outer foil. Turn the shaver on and pour some water over the outer toil. After about 10-20 seconds, turn the shaver off. Remove the outer foil and clean it with running water. Wipe off any moisture from the shaver with a dry cloth and remove the protective cap to allow the outer foil to dry completely. Replacing shaving head components It is recommended that you replace the outer foil at least every year and the inner blade at least every two years to maintain your shaver's cutting performance. Remove the outer foil Press the foil frame release buttons and remove the foil frame. Remove the outer foil from the frame by slipping it off the hooks. (Caution: The foil may spring out when released from the hooks.) (see fig. 7) Insert the new outer foil Slip the foil into the frame with the plastic edges facing inward. Guide the plastic edges onto the hooks in the frame (see fig. 8). Remove the inner blade Remove the inner blade by grasping it firmly at both ends and pulling straight away from the shaver (see fig. 9). Insert the new inner blade Hold the inner blade at both ends and press downward until it snaps into the shaver (see fig. 9). ATTENTION: The product you have purchased is powered by a nickel cadmium battery which is recyclable. At the end of it’s useful life, under various state and local laws, it is illegal to dispose of this battery into your municipal waste stream. Please call 1-800-8-BAT...