Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
1). charging When you charge the ladyshave for the first time or after a long period of disuse, let it charge for at least 16 hours. Make sure your hands and the ladyshave are dry when you prepare the ladyshave for charging. Make sure the ladyshave is switched off (Fig. ). Put the adapter in the wall socket. Insert the small plug into the charger (Fig. ). EnglisH Put the ladyshave on the charger (Fig. 4). Always put the ladyshave back onto the charger after use and leave , the charger connected to the mains continuously, even when you are not using it. A fully charged appliance has a cordless shaving time of up to 0 , minutes. using the appliance shaving 1 Set the Trim/Shave slide to the ‘Shave’ position. (Fig. 5) Put the desired shaving foil on the shaving head. Use the golden shaving foil to shave the underarms (Fig. 6). , Use the golden shaving foil to shave the bikini zone (Fig. 7). , Use the silver shaving foil to shave the legs (Fig. 8). , Do not use the silver shaving foil to shave the underarms and the bikini line to prevent injuries. 4 Switch on the ladyshave (Fig. 9). , Place the shaving unit gently on the skin and move the ladyshave slowly against the direction of hair growth while you press it lightly. The angle between the skin and the ladyshave should be 70° to get the best results. (Fig. 8) trimming Put the comb attachment onto the shaving head to trim hairs to an , even length (about 5mm), e.g. in the bikini zone (Fig. 10). The comb attachment can be put onto the shaving head in different positions, depending on the area to be trimmed. Set the Trim/Shave slide to the ‘Trim’ position. (Fig. 11) To trim the bikini zone, place the comb attachment on the shaving head with the recess of the attachment on the front of the appliance (Fig. 1 ). EnglisH 4 5 To trim the underarms, place the comb attachment on the shaving e.g. in the bikini zone (Fig. 15). head with the recess of the attachment on the back of the appliance. (Fig. 1 ) Switch on the ladyshave. , Move the appliance against the direction of hair growth. Make sure the surface of the comb always stays in contact with the skin (Fig. 14). shaping 1 Remove the comb attachment to shape precise lines and contours, Lock the trimmer by setting the Trim/Shave slide to the ‘Trim’ position. (Fig. 11) cleaning and maintenance Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. Always remove the ladyshave from the charger before you clean it under the tap. Make sure the ladyshave is dry before you put it back into the charger. Never immerse the charger in water or any other liquid. Only wipe the charger with a dry cloth. after every use Clean the ladyshave ever y time you have used it. 1 Switch off the ladyshave. Remove the shaving foil. (Fig. 16) Do not exert any pressure on the shaving foil to avoid damage. 4 Gently shake the shaving foil to remove hairs or clean it with the brush supplied. Remove the cutter block (Fig. 17). 10 EnglisH 5 6 7 Clean the hair chamber with the brush supplied (Fig. 18). For extra thorough cleaning, you can also rinse the ladyshave under the tap. After cleaning, always put the comb attachment on the appliance to protect the shaving foil (Fig. 10). twice a year Lubricate the shaving foil with a drop of sewing machine oil twice a , year (Fig. 19). storage When you are not using the ladyshave, you can store it in the shower by hanging it upside down from the shower loop. Attach the shower loop to the appliance as shown in the , picture (Fig. 0). replacement If you use the ladyshave two or more times a week, we advise you to replace the shaving foils and cutter block ever y one to two years. -The silver shaving foil may only be replaced with an original Philips shaving foil (type HP6119/01). -The golden shaving foil may only be replaced with an original Philips shaving foil (type HP6121). -The cutter block may only be replaced with an original Philips cutter block (type HP6111). Environment -Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preser ve the environment (Fig. 21). -The built-in rechargeable batter y contains substances that may pollute the environment. Always remove the batter y before you discard and hand in the appliance at an official collection point. EnglisH 11 1 4 Dispose of the batter y at an official collection point for batteries. If you have trouble removing the batter y, you can also take the appliance to a Philips ser vice centre.The staff of this centre will remove the batter y for you and will dispose of it in an environmentally safe way. Disposal of the battery Take the ladyshave off the charger. Let the motor run until the battery is completely empty. Pull the upper part of the ladyshave off the lower part with some force (Fig. ). Remove the battery with a screwdriver (Fig. ). guarantee & service If you ne...