Log:
Évaluations - 0, GPA: 0 ( )

Instructions Philips, Modèle HS555/01

Fabricant : Philips
Taille : 381.32 kb
Nom Fichier :
Langue d'enseignement: itenesfrdenlpt
Aller à la télécharger



Facilité d'utilisation


Maintenance and cleaning (see the drawings on pages 32 and 33) • Always switch the shaver off before carrying out maintenance or cleaning. • The rotating cutter blades of the Philishave system keep the shaved stubble neatly inside the shaving unit. In general, the shaving unit needs cleaning only once a week. Every week Fig. 2. Clean the guard slots using the short bristled end of the brush. Fig. 3. Pull the shaving unit from the shaver. Fig. 4 and 5. Clean the inside using the long bristled end of the brush. 5 Every three months If your skin is of an oily type or if you have been using a pre- shave lotion, this procedure should be carried out once a month. Fig. 6. Pull the shaving unit from the shaver. Fig. 7. Press the wheel downward and turn it anti-clockwise (see the arrow). Then lift the cluster frame holding the shaving heads from the shaving unit. Fig. 8. Slide one shaving head (guard and cutter) out of the frame. Keep your finger under the shaving head to prevent the cutter from falling out of the guard. Fig. 9. Keep the guard and cutter together because each pair has been especially ground to match each other. If the guards and cutters are mixed, it may take a couple of weeks before optimal shaving performance is restored. Fig. 10. Hold the cutter as shown... Fig. 11 ....and brush it carefully clean as illustrated. Use only the short bristled end of the brush. Fig. 12. Clean the inside of the guard, using the long bristled end of the brush. Fig. 13. Slide the shaving head back into place. Then clean the other two shaving heads one by one in the same way. Fig. 14. Replace the cluster frame with the shaving heads. Do not forget to secure the cluster frame by pressing the wheel downward and turning it clockwise. Fig. 15. Do not apply any pressure to the guards when replacing the shaving unit. Fig. 16. If you have used a degreasing liquid (e.g. alcohol) to clean the shaving heads, or if your skin is very dry, lubricate the guards with one drop of light machine oil. Every six months Fig. 17. Put two drops of light machine oil on the teeth of the trimmer. 6 Replacement shaving heads Worn or damaged shaving heads must be replaced only with the original Philips replacement heads type HP 1917. 7 Francais Vous etes maintenant proprietaire d’un rasoir Philishave de hautes performances, utilisant un principe de rasage unique avec tetes rotatives. Important • Lisez attentivement ce mode d’emploi et regardez tous les dessins des pages 3, 32 et 33 avant d’utiliser l’appareil. • Lorsque vous utilisez le systeme “Philishave” pour la premiere fois, il est important de savoir qu’une periode d’adaptation de la barbe d’environ 2 semaines est necessaire pour obtenir l’efficacite optimale du rasage. • Un nettoyage et un entretien reguliers vous garantissent de bonnes performances et une longue duree de vie de l’appareil. • Evitez tout contact de l’appareil avec l’eau. • Ne laissez pas l’appareil expose a de fortes chaleurs ou aux rayons directs du soleil. Desc...

Ce manuel est également adapté pour les modèles :
électrique - HS545/16 (381.32 kb)
électrique - HS545/33 (381.32 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories