Évaluations - 0, GPA: 0 ( )

Fabricant : Philips Taille : 5.24 mb Nom Fichier : Langue d'enseignement:

Battery low Note: If the rechargeable battery runs low during shaving, you can connect the shaver to the mains to finish the shave. ENGLISH 11 HQ8290 When the batter y is almost empty (when there are only 5 or fewer shaving minutes left), the minutes indication and the plug symbol star t flashing. When you switch off the shaver, the shaving minutes and the plug symbol continue to flash for a few more seconds. HQ8270/HQ8260 When the batter y is almost empty (when there are only 5 or fewer shaving minutes left), the orange plug symbol lights up. When you switch off the shaver, the plug symbol flashes for a few seconds. Remaining battery capacity The remaining batter y capacity is shown when you switch the shaver on or off: HQ8290 The remaining batter y capacity is indicated by the number of shaving minutes shown on the display. HQ8270/HQ8260 The remaining batter y capacity is indicated by the number of batter y level lights that are on. Travel lock You can lock the shaver when you are going to travel. The travel lock prevents the shaver from being switched on by accident. - - - - - - 12 ENGLISH Charging Note:The travel lock cannot be activated when the shaver is connected to the mains. Activating the travel lock 1 Press the on/off button for 4 seconds to enter the travel lock mode (your display may differ from the one shown in the figure). , The lock symbol appears on the display and the power-on symbol lights up for a few seconds to indicate that the travel lock has been activated. Note:When you push the on/off button during less than 4 seconds while the shaver is in the travel lock mode, the lock symbol and the power-on symbol in the on/off button flash for a few seconds. Deactivating the travel lock 1 Press the on/off button for 4 seconds. , The lock symbol disappears and the motor starts running to indicate that the travel lock has been deactivated. The shaver is now ready for use again. Note:When you start charging, the travel lock is automatically deactivated. It takes approx. 60 minutes to fully charge the batter y. When you charge the shaver for the first time or after a long period of disuse, let it charge for 4 hours. Tip:To optimise the battery capacity, fully charge the shaver and then use it normally until the battery is completely empty. Repeat this process three times in a row. If you optimise the battery capacity in this way, you ENGLISH 13 can also charge the shaver in between shaves, even if the battery is not completely empty yet. A fully charged shaver has a cordless shaving time of up to 55 minutes, which is enough for approx. 17 shaves. The actual shaving time is calculated by the shaver. If you have a heavy beard, the shaving time may be less than 55 minutes. The shaving time may also var y over time, depending on your shaving behaviour, cleaning habits and beard type. Charging for one shave HQ8290: As the shaver charges, the display shows the number of shaving minutes available. Depending on the number of minutes you usually...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :