Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
1 C2 Turn razor OFF, remove the charging plug from the outlet and power cord from the razor. Press the Razor Head Release Button to open the Razor Head Assembly. C3 Pull the shaving unit off the razor. 21 C4 Turn the lock counterclockwise to unlock (1) and remove the retaining frame (2). C 5 C 6 C 7 C 8 ENGLISH 21 Remove and clean one set of cutters and combs at a time. Separate the cutter from the comb and clean it with the brush supplied. Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it could take several weeks before optimal shaving performance is restored. Clean the inside and outside of the comb with the brush supplied. For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. Philips Norelco Shaving Head Cleaning Spray, Model HQ110 or alcohol) and lubricated with one drop of mineral oil (in the center of the head). This helps prevent wear of the shaving heads. Replace the set back into the Razor Head Assembly. Make sure that the two pointy edges of the head fit exactly into the recesses. ENGLISH 9 Repeat the process for the other two sets of cutters and combs. 10 Replace the frame and turn the lock clockwise until it locks into place. C 11 Insert the notch of the shaving unit into the slot in the top of the razor (1) and then close the shaving unit (2). NOTE: If the shaving unit does not close smoothly, make sure you inserted the shaving heads properly and that the retaining frame is locked. After Each Use: Trimmer 1 Turn razor OFF. C 2 Push down spring-release trimmer switch. C 3 Clean trimmer with the short-bristled side of the brush every time you use it. Brush up and down along the trimmer teeth. 22 ENGLISH C 4 Lubricate the trimmer teeth with one drop of mineral oil every 6 months. 5 Close trimmer by pressing trimmer down. Replacing the Razor Heads w Replace the razor heads once a year for optimal shaving results. w Replace damaged or worn razor heads with model HQ9 Philips Norelco razor heads only. 1 Turn razor OFF, remove the charging plug from the outlet and power cord from the razor. C 2 Press the Razor Head Release Button to open the Razor Head Assembly. C 3 Pull the shaving unit off the razor. C 4 Turn the lock counterclockwise to unlock (1) and remove the retaining frame (2). 23 1 2 2 1 24 ENGLISH Insert the notch of the shaving unit into the slot in the top of the razor (1) and then close the shaving unit (2). C Make sure that the two pointy edges of the head fit exactly into the recesses. C 7 12 Remove the razor heads and place the new razor heads in the shaving unit. 5 6 Replace the frame and turn the lock clockwise until it locks into place. NOTE: If the shaving unit does not close smoothly, make sure you inser ted the shaving heads properly and that the retaining frame is locked. This razor has no other user-ser viceable par ts. For assistance call 1-800-243-3050. C ENGLISH 25 Storage w Be sure razor is turned off. Remove cord from outlet and razor before storing in a safe, dry location where it will not be crushed, banged, or subject to damage. w Do not wrap power cord around razor when storing. w Store cord in a safe location where it will not be cut or damaged. w Do not place or store razor where it can fall or be pulled into a tub or sink, water or other liquid while plugged in. w Put the Protective Cap on razor to protect heads. Assistance w For assistance, visit our website: or call toll free 1-800-243-3050 w Online information is available 24 hours a day, 7 days a week. 26 ENGLISH ENGLISH 27 Battery Removal C Turn razor ON. Allow razor to run until the battery is empty/depleted. Turn razor OFF. Use a screwdriver to remove the screws in the back of the razor and in the hair chamber. Remove the front and back panels with a screwdriver. Bend the 6 hooks aside and take out the power unit. w This Philips Norelco razor contains arechargeable Lithium-Ion battery which must be disposed of properly. w Battery should only be removed when razor is to be discarded. w For assistance, visit our website, or call toll free: 1-800-243-3050. 1 2 3 4 5 6 Be careful, the hooks are sharp. 7 Remove the rechargeable battery. Be careful, the batter y strips are sharp. 8 9 10 Do not attempt to replace battery. Insulate battery ends by covering with tape and/or place battery in a small plastic bag. Discard your razor. Do not attempt to plug power cord into the outlet or recharge the razor after the battery has been removed. Contact your local town or city officials for battery disposal information or call 1-800-8-BATTERY or for battery drop-off locations. 28 ENGLISH Accessories C w Replacement HeadsModel HQ9 -For maximum razor performance, replace your Philips Norelco razor heads once a year. w Shaving Head Cleaning SprayHQ110 -Philips Norelco Shaving Head Cleaning Spray w Philips Norelco Razor Accessories may ...