Évaluations - , GPA: ( )

Instructions Philips, Modèle HQ7895/22

Fabricant : Philips
Taille : 945.84 kb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

-Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. Note: Do not make straight movements. 3 4 5 Press the on/off button once to switch off the shaver. Clean the shaver (see chapter ‘Cleaning and maintenance’). Put the protection cap on the shaver every time you have used it, to prevent damage (Fig. 12). trimming You can use the trimmer to groom your sideburns and moustache. 1 Push the slide downwards to open the trimmer (Fig. 13). Note:You can activate the trimmer while the motor is running. 2 Close the trimmer (‘click’) (Fig. 14). 10 EnglisH cleaning and maintenance The best and most hygienic way to clean the shaver is in the Jet Clean system.You can also clean the shaver by rinsing it under the tap or with the brush supplied. Regular cleaning guarantees better shaving performance. Note:Water may leak from the socket at the bottom of the shaver when you rinse it.This is normal and not dangerous. cleaning the shaver in the Jet clean system supplied preparing the Jet clean system for use Fill the cleaning chamber before first use and when the cleaning light flashes to indicate that the fluid level is too low. When the fluid level drops below the minimum level, the cleaning light flashes with inter vals and the holder returns to its star ting position. If you use the Jet Clean system to clean the shaver ever y day, refill the cleaning chamber approx. ever y 15 days. 1 Simultaneously press the release buttons on both sides of the cleaning chamber (1) and lift the Jet Clean system off the cleaningchamber (2) (Fig. 15). The cleaning chamber remains behind. 2 3 4 Unscrew the dosing cap from the bottle with HQ200 Cleaning Fluid and remove the airtight seal. Fill the cleaning chamber with cleaning fluid up to the MAX indication (Fig. 16). Place the Jet Clean system back onto the cleaning chamber (Fig. 17). Make sure the release buttons snap back into place. 5 Put the appliance plug in the Jet Clean system and put the adapter in the wall socket (Fig. 18). The holder automatically moves to the highest position. , The Jet Clean system is now ready for use. EnglisH 11 using the Jet clean system 1 Place the shaver in the holder and completely push down the lever to lock the shaver into place. The charging light on the Jet Clean system flashes to indicate that , the shaver is being charged. 2 Press the start button to start the cleaning program. (Fig. 19) The cleaning light star ts flashing and the shaver is automatically lowered into the cleaning fluid. During the cleaning program, which takes approx. 1 hour, the , cleaning light flashes continuously. During the first phase of the cleaning program, the shaver , automatically switches on and off several times and is put in different positions. During the second phase of the cleaning program, the shaver is , placed in the drying position. It stays in this position until the end of the program.The cleaning light lights up continuously. After the cleaning program, the shaver automatically returns to its , starting position and starts charging.The charging light on the Jet Clean system flashes. Note: If you press the start button or open the lever during cleaning, the cleaning program is aborted and reset. In this case, the cleaning light stops flashing and the holder returns to its starting position. Note: If the adapter is removed from the wall socket during cleaning, the cleaning program is aborted.The holder remains in its current position.When the adapter is put back into the wall socket, the holder moves to the highest position. Note: If the fluid volume in the cleaning chamber drops below the minimum level during the cleaning program, the program is aborted.The cleaning light flashes with intervals and the holder returns to its starting position. cleaning the Jet clean system The cleaning chamber is not dishwasher-proof. Clean the cleaning chamber ever y two weeks. 12 EnglisH 1 Simultaneously press the buttons on both sides of the Jet Clean system (1) and lift the Jet Clean system off the cleaning chamber(2). (Fig. 20) The cleaning chamber remains behind. 2 Pour any remaining cleaning fluid out of the cleaning chamber. (Fig. 21) You can simply pour the cleaning fluid down the sink. 3 4 Rinse the cleaning chamber under the tap (Fig. 22). Place the Jet Clean system back onto the cleaning chamber (Fig. 23). Make sure the release buttons snap back into place. 5 Clean the Jet Clean system with a moist cloth. cleaning the shaver under the tap Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt. Switch off the shaver, remove the adapter from the wall socket and pull the appliance plug out of the shaver. Press the release button to open the shaving unit (Fig. 24). Rinse the hair chamber and the inside of the shaving unit under a hot tap for some time (Fig. 25). Rinse the outside of the shaving unit under a hot tap for some time (Fig. 26). Close the shaving unit and shake off excess water. ...