Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
8 hours. Do not leave the appliance connected to the mains for more than 24 hours. Charging the appliance Charge the appliance when the motor stops or star ts running slower. 1 2 Push the slide pins out of the appliance with the slide (Fig. 2). Insert the slide pins into the wall socket (Fig. 3). As soon as you start to charge the empty shaver, , the green pcharging light goes on (Fig. 4). 3 Remove the appliance from the wall socket when the battery has been fully charged. Cordless shaving time A fully charged shaver has a cordless shaving time of up to 30 minutes. Using the appliance Shaving 1 Switch on the shaver on by pressing the switch lock and pushing the on/off slide upwards (Fig. 5). The switch lock prevents accidental switching on of the appliance. 2 Move the shaving heads quickly over your skin, making both straight and circular movements (Fig. 6). Shaving on a dr y face gives the best results. Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. 3 4 Switch off the shaver by pushing the on/off slide downwards. Put the protection cap on the shaver every time you have used it, to prevent damage (Fig. 7). Cleaning and maintenance Regular cleaning guarantees better shaving performance. For easy and optimal cleaning, the Philips Action , Clean (shaving head cleaner, type HQ100) is available. Ask your Philips dealer for information (Fig. 8). Note:The Philips Action Clean may not be available in all countries. Contact the Customer Care Centre in your country about the availability of this accessory. You can also clean the shaver in the following way: Every week: shaving unit and hair chamber 1 Switch off the shaver or remove it from the wall socket. 2 3 4 5 Clean the top of the appliance first, using the brush supplied (Fig. 9). Press the release button (1) and remove the shaving unit (2) (Fig. 10). Clean the inside of the shaving unit and the hair chamber with the brush (Fig. 11). Put the shaving unit back onto the shaver. Every two months: shaving heads 1 2 3 4 Switch off the shaver or remove it from the wall socket. Press the release button (1) and remove the shaving unit (2) (Fig. 10). Remove the retaining frame by pushing the sides of the central spring towards each other (1) and lifting the retaining frame out of the shaving unit (2) (Fig. 12). Slide the shaving heads out of the retaining frame and clean them one by one (Fig. 13). Do not mix up the cutters and the guards. This is essential since each cutter has been ground with its corresponding guard for optimal performance. If you accidentally mix the sets up, it could take several weeks before optimal shaving performance is restored. 5 Clean the cutter with the short-bristled side of the brush (Fig. 14). Brush carefully in the direction of the arrow. 6 7 8 Brush the guard (Fig. 15). Slide the shaving heads back into the retaining frame and put the retaining frame back into the shaving unit (Fig. 16). Put the shaving unit back onto the shaver. For extra thorough cleaning, clean the shaving , heads by putting them in a degreasing liquid (e.g. alcohol) every six months.To remove the shaving heads, follow steps 1 to 4 described above. After cleaning, lubricate the central point on the inside of the guards with a drop of sewing machine oil to prevent wear of the shaving heads (Fig. 17). Storage Put the protection cap on the shaver to prevent , damage (Fig. 7). Replacement Replace the shaving heads every two years for optimal shaving results. Replace damaged or worn shaving heads with HQ4 C Philips shaving heads only. 1 2 3 4 5 6 7 Switch off the shaver or remove it from the wall socket. Press the release button (1) and remove the shaving unit (2) (Fig. 10). Remove the retaining frame by pushing the sides of the central spring towards each other (1) and lifting the retaining frame out of the shaving unit (2) (Fig. 12). Slide the shaving heads out of the retaining frame (Fig. 13). Slide new shaving heads into the retaining frame (Fig. 16). Put the retaining frame back into the shaving unit (Fig. 18). Put the shaving unit back onto the shaver. Accessories The following accessories are available: -HQ4 C Philips shaving heads. -HQ100 Philips Shaving Head Cleaner (not available in China). -HQ101 Philips Shaving Head Cleaning Fluid (not available in China). -HQ110 Philips Shaving Head Cleaning Spray (not available in China). Environment -Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preser ve the environment (Fig. 19). -The built-in rechargeable shaver batter y contains substances that may pollute the environment. Always remove the battery before you discard and hand in the shaver at an official collection point. Dispose of the batter y at an official collection point for batteries. If you have trouble removing the batter y, you can also take the shaver to a Philips service centre.The staff of this ce...
Ce manuel est également adapté pour les modèles :électrique - HQ46/15 (812.57 kb)