Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
Cleaner, basic safety precautions should always be followed, including the following: Action Clean • Three Head Holder Razor Head Important Before using your new Action Clean Razor Head READ ALL INSTRUCTIONS BEFORE Cleaner, it is important to follow the instruc- Cleaner USING THIS APPLIANCE. tions below: • Two Head Holder • You do not need to remove cutters and combs HQ100 1. Close supervision is necessary for any from Razor Head Assembly to clean them in the appliance being used by or near children Action Clean Razor Head Cleaner. The whole or the disabled. assembly piece can be cleaned as a complete unit. 2. Use this Razor Head Cleaner for its intended If you do remove cutters and combs be careful household use as described in this manual. • Top not to interchange them as they are matched solutions not recommended by Philips Do not use attachments or other cleaning sets. If you do interchange cutters and Instructions for use Electronics North America Corporation. combs, the shaving performance may be adversely affected for the next few shaves 3. Never place this appliance on a soft surface, such as a bed or a sofa, where solution may until the blades reseat themselves. spill. Do not tilt the unit. 4. Do not overfill chamber with liquid. 5. Do not rinse with water. • Action Cleaning 6. Never operate this unit if it is not working Chamber properly or if it has been dropped or damaged. Return Razor Head Cleaner to an Authorized Norelco Service Location for examination and repair. • Base SAVE THESE If you need help, answers or INSTRUCTIONS service, please call us at 1-800-243-3050 How to use your 1. Turn the top of the Action Clean unit counter 5 4 9 8 8. When finished, remove top from Action Action Clean clockwise and pull top from Cleaning 4. Empty the contents of the Action Cleaning Cleaning Chamber and remove Razor Head Assembly. (Fig. 8) Place Razor Head Solution into the Cleaning Chamber. (Fig. 4) Razor Head Chamber. (Fig. 1) Assembly on a paper towel to air dry. Make Cleaner sure Razor Head Assembly is completely dry 5. Place Razor Head Assembly from razor (with before placing it back on your razor. heads in place) onto Head Holder. (Fig.5) 2. Remove the filter unit from the Cleaning Chamber. (Fig. 2) 9. DO NOT RINSE WITH WATER. 6. Replace top on Cleaning Chamber, making sure that it locks into place by turning clock3. Depending on your razor model, select either wise until it “clicks” into place. (Fig. 6) the two or three head holder. Place it on top 10. After each cleaning, spread one drop of lubricating oil from the tube included, of filter unit, ensuring that the three notches Norelco Razor Lubricant Model AL80, or of the holder fit in the slots of the filter unit. 7. Clean heads by pumping the top on the Action one drop of mineral oil over each razor Cleaning Chamber for about 30 seconds. Replace the filter unit into the Action Cleaning head using your finger. (Fig.7) Chamber, making sure that the filter unit clicks down into place. (Fig. 3) 2 3 11. For consistently close and comfortable shaves, you should clean your razor heads every 4 - 6 weeks or when the display on your razor tells you to do so. If your shave is still not close enough, you may need new replacement heads. 6 7 10 11 12. Change the filter and Action Clean Cleaning Solution at least once a year. (Fig. 9,10,11) 13. Use only Norelco Action Clean Cleaning Solution with filter, model HQ101, with this unit. 1 ReplacementAccessories Replacement Accessories may be purchased at an Authorized Norelco Service Location or by using the handy order form enclosed. Razor Head Cleaning Solution and Razor Lubricant: Norelco Action Clean Cleaning Solution, Model HQ101, for use with Action Clean Razor Head Cleaner, model HQ100, only. Not for use with Norelco RAZORMATE Electrosonic Razor Head Cleaner, model ERC100. It is recommended that you change the filter and Action Clean Cleaning Solution at least once a year. Norelco Razor Lubricant, Model AL80. Replacement Heads: The self-sharpening rotary blades in your Norelco Razor are precision-made to give closer shaves. When they finally do need replacing, specify only Norelco brand replacement cutters and combs. It is recommended that you replace your razor heads once a year. DO NOT USE shaver sharpeners as this will damage your blades and lifters and will adversely affect the shaving performance. FULL ONE YEAR WARRANTY Philips Electronics North America Corporation warrants each new Norelco Product, Model HQ100, against defects in materials or workmanship for a period of one year from the date of purchase, and agrees to repair or replace any defective product without charge. IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product or loss of parts o...