Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
Power management operates as follows: . After 10 minutes of inactivity, the Reader enters the sleep mode automatically and battery consumption is minimized. . After two* days of inactivity, the Reader automatically shuts down and stops consuming battery power. * If battery power is at a low level, the Reader will shut down within two days of inactivity. Note . The Reader does not enter the sleep mode after 10 minutes of inactivity even if [Power Management] is set to [On], when: – connected to a computer using the supplied USB cable – charging with an AC adapter (PRSA-AC1) (optional) (button) (button) – when a slideshow is set Table of Contents Index Changing Settings Changing Settings Locks the Reader by setting a pass code. Tap [On] to set a pass code. Input a 4-digit number by tapping the numeric key pad. Tap [OK] to lock the Reader. To unlock, input the pass code and tap [OK]. Then tap [Off] to unlock the Reader, and tap [OK]. Notes . [0000] is the factory setting. . You are recommended to make a note of your pass code and keep it in a safe place separate from the Reader. . If you forget your pass code, contact your Sony Customer Support (.18); however, note that in unlocking your device, all content on it will be erased. . When the [Device Lock] setting is activated, the Reader will not be recognized by your computer, please set to [Off ] before connecting. Table of Contents Index (button) (button) Changing Settings Changing Settings Sets the standby screen during the sleep mode. [Off] displays nothing in the sleep mode. . [Show picture]: Set [On] to show the selected pictures on the standby screen. For details on setting the pictures, see “To set as a standby screen” (.84). . [Show message]: Set [On] to show messages on the standby screen. Table of Contents Index (button) (button) Changing Settings Changing Settings [Restore Defaults] Restores the Reader to its default settings. You will need to perform the initial settings after restoring. [Clear Keyboard History] Deletes predictive words for the on-screen keyboard. [Format Internal Memory] Formats the internal memory of the Reader. Formatting will erase all the contents in the storage. Note . Before formatting, make sure to backup data you wish to keep to your computer via Reader Library. Note that protected content will also be deleted by formatting. Table of Contents Index (button) (button) Troubleshooting Troubleshooting If the Reader does not function as expected, try the following steps to resolve the issue. 1 Reset the Reader by pressing the RESET hole with a small pin or clip .after 5 seconds, slide the power switch to restart the Reader. The content and settings stored on the Reader are not affected by resetting. Notes . The bookmarks, highlights, handwritten memos, or the setting information may be deleted by resetting. . The screen will not change after pressing the RESET hole. Slide the power switch to restart the Reader. . Do not push the RESET hole with a breakable point, such as the graphite of a mechanical pencil. It causes the RESET hole to be blocked. 2 Check the symptoms list (.94). 3 If it is an issue regarding Reader Library, check for information in Reader Library Help. 4 Look for information on the support Web sites (button) (button) (.18). Table of Contents Index Troubleshooting Troubleshooting Power Battery cannot charge. .If [Charging stopped] is displayed on the screen, check the conditions to charge the Reader again (.12). If charging the Reader by connecting to your computer, make sure your computer is powered on. .Charge the battery within the temperature range of 41°F to 95°F (5°C to 5°C) (.19). Battery life seems short. .The operating temperature is below 41°F (5°C). This is due to the battery characteristics and not a malfunction. .The Reader is discharged automatically even when not in use for a prolonged period. It is recommended that you charge the Reader again before turning on the Reader. .The battery was not been given enough time to charge fully. Charge the Reader until the charge/busy indicator turns off. (The battery icon does not indicate remaining battery power during charging.) Table of Contents Index (button) (button) Troubleshooting Troubleshooting The Reader cannot turn on. .Moisture condensation may have occurred. Wait for a few hours and then turn on the Reader. .Battery power has been fully depleted. Charge the Reader by connecting to the computer via the supplied USB cable (.12). Screen Display takes a long time to appear. .In a cold place such as outdoors, it may take time for the display to appear. This is due to the display characteristics and not a malfunction. .It may take a few moments for the Reader start-up screen to appear after a reset or shutdown. Table of Contents Index (button) (button) Troubleshooting Troubleshooting .Reset the Reader by pressing the RESET hole. Then, slide the power switch to turn on the Reader again (.8). Touch operation is not effective. .If condensation occurs in t...
Ce manuel est également adapté pour les modèles :E-books - PRS-350 (2.46 mb)