Évaluations - 4, GPA: 4.3
(
)
)
|
Facilité d'utilisation
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. ® Dayton Natural Gas Construction Heater Description Dayton Model 3VH19 heater is 100,000 Btu/Hr construction heater. This heater uses natural gas for combustion. It is primarily intended for the temporary heating of buildings under construction, alteration, or repair. This heater should never be used in occupied dwellings. Fire, burn, inhalation, and explosion hazard. Keep solid combustibles such as building materials, paper or cardboard, a safe distance away from the heater as recommended by the instructions. Never use the heater in spaces which do or may contain volatile or airborne combustibles, or products such as gasoline, solvents, paint thinner, dust particles, or unknown chemicals. Failure to comply with the precautions and instructions provided with this heater can result in death, serious bodily injury, and prop- erty loss or damage from hazards of fire, explosion, burn, as- phyxiation, carbon mon- oxide poisoning, and/or electrical shock. Only persons who can understand and follow instructions should use this heater. If you need assistance or heater information such as an instructions manual, labels, etc. contact the manufac- turer. GENERAL HAZARD WARNING Not for home or recreational vehicle use. Unpacking 1. Remove all packing items applied to heater for shipment. Keep plastic cover caps (attached to valve inlet) for storage. 2. Remove all items from carton. 3. Check all items for shipping damage. If heater is damaged, promptly inform dealer where you bought heater. 4. Hose not included. User must supply hose or flexible connector. Figure 1 – Model 3VH19 ® The heater is designed for use as a construction heater in accordance with ANSI Z83.7/CGA 2.14. Other standards govern the use of fuel gases and heating products for specific uses. Your local authority can advise you about these. The primary purpose of construction heaters is to provide temporary heating of buildings under construction, alteration or repair. Properly used, the heater provides safe economical heating. Products of combustion are vented into the area being heated. We cannot foresee every use which may be made of our heaters. CHECK WITH YOUR LOCAL FIRE SAFETY AUTHORITY IF YOU HAVE QUESTIONS ABOUT HEATER USE. Other standards govern the use of fuel gases and heat producing products for specific uses. Your local authorities can advise you about these. 104132-01 © 1997 W.W. Grainger, Inc. Form 5S4125 Rev. B Printed in U.S.A. 10/97 03430 0997/230/VCPVP Version B - For Reduction G016.J ® Dayton Operating Instructions and Parts Manual 3VH19 ® Dayton Natural Gas Construction Heater General Safety Information Make certain you read and understand all warnings. Keep these instructions for reference. It is your guide to safe and proper operation of this heater. Safety information appears throughout these instructions. Pay close attention to them. Below are definitions for the safety information listed throughout this manual. Under this heading, installation, operating and maintenance procedures or practices will be found that, if not carefully followed, WILL result in IMMEDIATE serious personal injury or death. Under this heading, installation, operating, and maintenance procedures or practices will be found that, if not carefully followed, COULD result in severe personal injury or death. Under this heading, installation, operating, and maintenance procedures or practices will be found that, if not carefully followed, MAY result in minor personal injury, product or property damage. IMPORTANT: Every possible circumstance that might involve a hazard cannot be anticipated. The warnings in this manual and on tags or decals affixed to the unit are therefore not all-inclusive. If a procedure, work method, or operating technique not specifically recommended by Dayton is used, you must make sure it is safe for you and others. You should also ensure that equipment will not be damaged or made unsafe by the operating or maintenance method you choose. Carbon monoxide poisoning: Some people are more affected by carbon monoxide than others. Early signs of carbon monoxide poisoning resemble the flu, with headaches, dizziness, and/or nausea. If you have these signs, the heater may not be operating properly. Get fresh air at once! Have heater serviced. Natural Gas: Natural gas has a distinctive odor. This odor helps you detect a natural gas leak. However, the odor may fade. Natural gas may be present even though no odor exists. • Install and use heater with care. Follow all local ordinances and codes. In the absence of local ordinances and codes, refer to the National Fuel Gas Code Handbook, NFPA54/ANSI Z223.1 and the Natural Gas Installation Code, CAN/CGA B149.2. This instructs on the safe storage and handling of flammable gases. • Use only with natural gas. Do ...