Évaluations - 2, GPA: 3.5
(
)
)
|
Facilité d'utilisation
To the extent that any provision of this Warranty is inconsistent with any applicable law, such provision shall be deemed voided or amended, as necessary, to comply with such law. Holmes® and the Holmes® logo are registered trademarks of The Holmes Group, Inc. or its subsidiaries HRH848.03.US.OM1 HRH84803EM2 Printed in China Owner’s Guide HRH848 Oscillating Parabolic Heater with Remote Control PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions shouldalways be followed to reduce the risk of fire, electric shock, and injuryto persons, including the following: 1. Read all instructions before using the appliance. 2. To avoid fire or shock hazard, plug the appliance directly into a120V AC electrical outlet. 3. The heater is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. If provided, use handles when movingthis heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 ft (0.9 m) fromthe front of the heater and keep them away from the sides and rear. 4. DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or the like. Arrange cord away from traffic areaand where it will not be tripped over. 5. This heater is not intended for use in bathrooms, laundry areasand similar indoor location. NEVER locate heater where it may fallinto a bathtub or other water container. 6. Extreme caution is necessary when any heater is used by, or nearchildren or invalids, and whenever the heater is left operating andunattended. 7. Always unplug the heater when not in use. 8. When unplugging, be sure to pull by the plug and not the cord. 9. DO NOT insert or allow foreign objects to enter any ventilation orexhaust opening as this may cause an electric shock or fire, ordamage the heater. 10.DO NOT operate heater with a damaged cord or plug, or after theheater malfunctions, has been dropped or damaged in anymanner. Return appliance to manufacturer for examination, electrical or mechanical adjustment, or repair. 11.A heater has hot and arcing or sparking parts inside. DO NOT useit in areas where gasoline, paint, or flammable liquids are used orstored. 12.Use appliance only for intended household use as described in thismanual. Any other use not recommended by the manufacturer maycause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by The Holmes Group maycause hazards. 13.DO NOT use outdoors. 14.To prevent a possible fire, DO NOT block air intakes or exhaust in any manner. DO NOT use on soft surfaces, like a bed, where openings may become blocked. 15.To disconnect heater, turn controls to OFF, then remove plug fromoutlet. THIS PRODUCT IS EQUIPPED WITH A POLARIZED AC (Alternating Current) PLUG (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact qualified personnel to install the proper outlet. DO NOT DEFEAT THE SAFETY PURPOSE OF THIS POLARIZED PLUG IN ANY WAY 16.Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire. However, if you have touse an extension cord, the cord shall be No. 14 AWG minimum size and rated not less than 1875 watts. 17.If the heater will not operate, see specific instructions on AutoSafety Shut-off. 18.DO NOT attempt to repair or adjust any electrical or mechanicalfunctions on this unit. Doing so will void your warranty. The inside of the unit contains no user serviceable parts. All servicing should be performed by qualified personnel only. 19.Discontinue use if plug or outlet is hot. It is recommended that theoutlet be replaced if plug or outlet is hot to touch. PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS TECHNICAL SPECIFICATIONS • Wattage: 1100 W (+5% –15%) • Working Voltage: 120v AC/60Hz AUTO SAFETY SHUT-OFF WITH MANUAL RESET This heater is equipped with a patented, technologically-advanced safety system that requires the user to reset the heater if there is a potential overheat situation. When a potential overheat temperature is reached, the system will automatically shut the heater off. It can only resume operation when the user resets the unit. To Reset the Heater: 1. Unplug the heater and wait 10 minutes for the unit to cool down. 2. After the 10 minutes, push the RESET button. 3. Plug the unit in again and operate normally. Tip-Over Protection: When the unit is accidentally knocked over, it will automatically shut off. To reset, simply place the heater in an upright position. ASSEMBLY INSTRUCTIONS 1. Carefully remove your heater from the box. Please save the carton for off-season storage. 2. Place heater on firm level surface. 3. Make sure the power cord comes straight out of the hole in the middle of the base without obstructing the channels on the...