Évaluations - 3, GPA: 4.7
(
)
)
|
Facilité d'utilisation
When the heater is working properly: * The flame is contained within the heater. * The flame is essentially blue with perhaps some yellow tipping. * There is no strong disagreeable odor, eye burning or other physical discomfort. * There is no smoke or soot internal or external to the heater. * There are no unplanned or unexplained shut downs of the heater. The parts lists and exploded view show the heater as it was constructed. Do not use a heater which is different from that shown. In this regard, use only the hose, regulator and cylinder connection fitting (called a POL fitting) supplied with the heater. IMPORTANT Match the color stripe on the hangtag attached to the hose assembly with the color on the label located near the propane inlet fitting on the heater. Do not use alternates. For this heater, the regulator must be set as shown in "specifications". If there is any uncertainty about the regulator setting, have it checked. A heater which is not working right must be repaired, but only by a trained, experienced service person. In-warranty products will be repaired with no charge for either parts or labor. Please include a brief statement indicating date, place of purchase, the nature of the problem and proof of purchase. Out-of-warrranty products will be repaired with a charge for parts and labor. Enerco Group, Inc. | Forced Air Propane Construction Heater 5 Operating Instructions and Owner’s Manual Forced Air Propane Construction Heater • Model #35FA Forced Air Propane Construction Heater • Model #35FA ITEM# DESCRIPTION QTY. REF.# ITEM# DESCRIPTION QTY. 1 10720 Heater Body Kit 1 13 8077 Fan Blade, 6.75 x .75 Pitch 1 2 2100 Control Box Assy 1 14 2113 Power Cord Assembly 1 3 8079 Valve w/Thermocouple 1 15 8136 Bushing Strain Relief 1 * 1007 Hose & Regulator Assembly 1 16 8116 Nut Hex 5-28 TE Valve 2 * 17 7161 Nut, Piezo 1 * 2130 Wire Assembly 1 18 6473 Piezo Ignitor 1 7 8080 Electrode 1 19 7094 Clip Handle 2 8 6168 High Limit Switch 240oF (116oC) 1 20 7095 Handle 1 * * M8494 Label, Model Warnings 1 10 8091 Nut Hex M8 x 1 Fine Thd Thermocouple 2 * 70036 Label, Operating Instructions 1 11 8076 Motor 0.74 A 1 * 8649 Manual, Operating Instructions/Parts List 1 12 2101 Grille Assembly 1 * M8497 Label, Model 1 * 8204 Label, Hang Tag, LP 1 * Not shown on exploded view Enerco Group, Inc. | Forced Air Propane Construction Heater 6 Operating Instructions and Owner’s Manual SIZE AND CAPACITY OF PROPANE CYLINDERS REQUIRED SIZE AND CAPACITY OF PROPANE CYLINDERS REQUIRED 1. Select the lowest air temperature expected (at the bottom of the chart). 2. Move straight up to time of operation desired (left side of chart). 3. Read the cylinder size required. All heaters should have: full cylinders good air circulation no frost on cylinders BTU'S PER HOUR REQUIRED WARRANTY We are pleased that you have selected our product and take this opportunity to assure you that qualified service facilities are available if required. With the cooperation of independent dealers, a nationwide network of authorized servicing dealers is available for your servicing requirements. Should your product require servicing, read the section of the manual entitled “Servicing”. Who gets the warranty? The warranty is limited to the consumer who originally purchases the product. What is covered? This limited warranty covers all imperfections in workmanship and material. What is not covered? This limited warranty does not cover damage resulting from accident, misuse or abuse, lack of proper maintenance, affixing of any attachments not provided with the products, or loss of parts. IN NO EVENT SHALL ENERCO TECHNICAL PRODUCTS BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES NOR FOR ANY DAMAGES RESULTING FROM MISUSE OR MODIFICATION OF THIS PRODUCT. Enerco Group, Inc. | Forced Air Propane Construction Heater 7 Operating Instructions and Owner’s Manual WARNING: USE ONLY MANUFACTURER’S REPLACEMENT PARTS. USE OF ANY OTHER PARTS COULD CAUSE INJURY OR DEATH. REPLACEMENT PARTS ARE ONLY AVAILABLE DIRECT FROM THE FACTORY AND MUST BE INSTALLED BY A QUALIFIED SERVICE AGENCY. PARTS ORDERING INFORMATION: PURCHASING: Accessories may be purchased at any Mr. Heater/ HeatStar local dealer or direct from the factory FOR INFORMATION REGARDING SERVICE Please call Toll-Free 800-251-0001 • Our office hours are 8:30 AM – 5:00 PM, EST, Monday through Friday. Please include the model number, date of purchase, and description of problem in all communication. LIMITED WARRANTY The company warrants this product to be free from imperfections in material or workmanship, under normal and proper use in accordance with instructions of The Company, for a period of one year from the date of delivery to the buyer. The Company, at its option, will repair or replace products returned by the buyer to the factory, transportation prepaid within said one year period and found by the Company to have imperfections in material or workmanship. If a part is damaged o...
Ce manuel est également adapté pour les modèles :électrique - HS35FA (98.21 kb)