Évaluations - 2, GPA: 4.5 ( )

Fabricant : Cadet Taille : 1.47 mb Nom Fichier : Langue d'enseignement:

Save this manual for future reference. Please read this manual before installing and using the appliance. Instructions to Installer 1. Installer must leave instruction manual with owner after installation. 2. Installer must have owner fill out and mail warranty card supplied with unvented room heater/vented decorative appliance. 3. Installer should show owner how to start and operate unvented room heater/vented decorative appliance. Always consult your local Building Department regarding regulations, codes or ordinances which apply to the installation of an unvented room heater/vented decorative appliance. This appliance may be installed in an aftermarket* manufactured (mobile) home, where not prohibited by state or local codes. *Aftermarket: Completion of sale, not for purpose of resale, from the manufacturer. This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases. New Installation VFSV Model - variable does not operate-ON is OFF/OFF is ON- wires into the back of receiver are reversed. Solid-fuels shall not be burned in a fireplace where a vented decorative appliance is installed. A vented decorative appliance must be installed only in a solid-fuel burning fireplace with a working flue and constructed of non-combustible material. Any alteration of the original design, installed other than as shown in these instructions or use with a type of gas not shown on the rating plate is the responsibility of the person and company making the change. Important All correspondence should refer to complete Model Number, Serial Number and type of gas. Attention: During initial use of log you will detect an odor as the log is cured. Notice: During initial firing of this unit, its paint will bake out, and smoke will occur. To prevent triggering of smoke alarms, ventilate the room in which the unit is installed. WARNINGThis appliance is for installation only in a solid-fuel burning masonry or UL 127 factory-built fireplace or in a listed ventless firebox enclosure. It has been design certified for these installations. Exception: DO NOT install this appliance in a factory-built fireplace that includes instructions stating it has not been tested or should not be used with unvented gas logs. WARNINGAny modification to this unvented gas heater or its controls can be dangerous. Improper installation or use of the heater can cause serious injury or death from fire, burns, explosion or carbon monoxide poisoning. Well Head Gas Installations Some natural gas utilities use "well head" gas. This may affect the Btu output of the unit. Contact the gas company for the heating value. Contact the manufacturer or your gas company before changing spud/orifice size. ACCESSORIES Description Color For use with VFSV, VFSM and VFSR models EK-1 Embers Kit ELH-1 Fireplace Hood for Vent-Free Logs Black ELH-2 Fireplace Hood for Vent-Free Logs Brass For use with VFSR models only FRBC Battery Operated Remote Control FRBTC Battery Operated Remote Control with Thermostat FREC Electric Remote Control FWS Wall Switch TMV Wall Thermostat, Millivolt - Reed Switch Notice: Thermostats are for Vent-Free Applications only. PRODUCT SPECIFICATION PRODUCT SPECIFICATION Natural Gas Propane Gas Variable Millivolt Manual Variable Millivolt Manual Regulator pressure setting 3.5" W.C. 3.5" W.C. 6.0" W.C. 10.0" W.C. 10.0" W.C. 10.0" W.C. Gas inlet pressure Max. 10.5" W.C. 10.5" W.C. 10.5" W.C. 13.0" W.C. 13.0" W.C. 13.0" W.C. Min. 5.0" W.C. 5.0" W.C. 7.0" W.C. 11.0" W.C. 11.0" W.C. 11.0" W.C. Model Gas Valve Type BTUH Max. Rate BTUH Med. Rate BTUH ...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :