Log:
Évaluations - 4, GPA: 4.3 ( )

Instructions Desa, Modèle ST 3000

Fabricant : Desa
Taille : 845.32 kb
Nom Fichier : ST1500-3000.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


If the tank has been damaged by external causes. b. In case of misuse, neglect (including frost damage), incorrect or improper use of the tank, or if attempts have been made to repair leaks; c. In the case of ingress of contaminants or other particles into the tank. d. If the water conductivity is less than 150 .S/cm and/or the degree of water hardness is less than 6 °DH/75 ppm. e. If unfiltered, recycled water flows through the tank, or is stored in the tank. 4.5 Scope of the warranty A.O. Smith’s obligations ensuing from this warranty are limited to the free delivery ex Veldhoven store of the parts or the tanks respectively. A.O. Smith is not liable for carriage, labor, installation and other costs relating to the replacement. 4.6 Claims Any claim under this warranty must be filed with the dealer who originally sold the tank, or with any other dealer or supplier of A.O. Smith’s products. The examination of the tank pursuant to sections 4.1 and 4.2 will be carried out at A.O. Smith discretion. 4.7 No other obligations for A.O. Smith than those stated in this manual With respect to the tank, respectively the tanks (or parts or components thereof) supplied as a replacement, A.O. Smith will grant no other warranty or guarantee than the warranty detailed above. A.O. Smith will not be liable by virtue of this warranty or otherwise for damage to any persons or property, caused by parts or components, respectively the steel, glass-lined tank supplied by them. This warranty applies to the following models: ST 1500-3000 ST 1500-3000 series Kit installation instructions 1 – Contents of flange kit Bag A Flange plate Designation Quantity Bolts 6 Gasket 1 Flange plate 1 Bag D 1 Bag D Flange collar and cover fixation screws and brackets Designation Quantite Brackets 3 Parker screws 5 Flange collar and cover Installation manuals 2 – Mounting instructions for flange covers, anodes, T&P and insulation package IMPORTANT: Start with mounting two plug anodes in the lower and center anode opening on the side of the tank. In the top anode opening you need to mount the outlet anode with T-piece for T&P relieve valve (included) and thermometer (not included). Make sure that anodes are mounted water tight but do make good contact with the metal of the tank. Mounting of the flange, covers and jacket MUST be done in the indicated sequence. For further information please refer to the installation manual 0307138RO Bag D, fixing bracket for clean-out collar and cover Item Designation Quantity 1 Bracket 3 Bag A, flange cover Item Designation Quantity 2 Bolds. 6 3 Gasket 1 4 Steel flange cover 1 5 Nuts 6 !!! In case the unit is supplied with a flexible insulation jacket, now start mounting the insulation (see overleaf). If the insulation is of the rigid type, proceed as follows: Bag D: Mounting of clean out collar and cover Item Designation Quantity 6 parker screws 5 3 – Mounting instruction for rigid jacket 4 – Mounting of the flexible jacket Install the flexible jacket before mounting the clean out collar and cover. The collar serves as mould to cut the required opening in the jacket. In case the zipper is difficult to close, it might be neccessary to go through one heatng cycle. A warmed up jacket is easier to close. Nota: Jackets and kits are supplied is separate colli. 0307593R0 Text Box: Nota: top panels, once placed, fixate the jacket. Text Box: Center each jacket segment on one of the feet .. ...

Ce manuel est également adapté pour les modèles :
électrique - ST 1500 (845.32 kb)
électrique - ST 1500 (845.32 kb)
électrique - ST 3000 (845.32 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories