Évaluations - 1, GPA: 3
(
)
)
|
Facilité d'utilisation
safety regulations or equivalent. If you are unsure, consult an electrical service professional. * Avoid the use of an extension cord with this appliance. * Do not place any objects such as furniture, papers, clothing or curtains closer than 3 ft to the front and sides of the heater. A CAUTION NOTE: your IR Heater main body, electrical components & bracket are fully factory assembled. Do NOT attempt to service or disassemble without proper instructions. 3 Head Unit With aluminum shield, pre-installed, 16/3 grounded electrical cord, wall mount component PARTS LIST 1 - IR Head Unit w/ Protective Aluminum Shield - Pre-installed wall mount component - Preassembled aluminum main heating unit w/1500W quartz halogen lamp, swivel bracket & 12 ft., 16/3 grounded electrical cord. 2 - Wal Mounting Bracket 3 - Hardware - 4 threaded bolts/screws, phillips pan head, 4 wall anchors, 1 short set screw. Wall Mounting Bracket *** Important Notice *** Do not return to place of purchase!! Please contact our Toll Free Hotline: (866) 985-7877 for customer service & warranty issues Important Instructions 1. Read all instructions before using this heater. 2. This heater will get very hot while in use. To avoid burning, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep flammable materials, such as furniture, pillows, bedding, papers cloths, and curtains at least 3 feet (0.9m) from the heater. 3. DO NOT LEAVE heater unattended. Extreme caution is necessary when any heater is used by, or near, children or disabled persons, and whenever the heater is left operating and unattended 4. Always unplug heater when not in use. 5. Do not operate any heater with a damaged cord or plug, if the heater malfunctions, or has been dropped or damaged in any manner. Return heater to authorized service facility for repairs. 6. Can be used indoors or outdoors, operate 3 feet (0.9m) from people or objects. 7. Never operate heater near water or where it can be knocked over. 8. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over. 12. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked. 13. A heater has hot and sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored. 14. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electrical shock, or injury to persons. 15. Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire. However, if you have to use an extension cord, use either a 12 or 14 gauge wire which is rated not less then 1900 watts. The recommended length for a 14 gauge is 0-50 feet, but if need be long use a 12 gauge no longer then 100 feet. 16. SAVE THESE INSTRUCTIONS for future reference. 9. To disconnect heater, remove plug from electrical outlet. 10. Connect to properly grounded outlets only. 11. Do not insert or allow foreign objects to enter ventilation or exhaust opening; doing so may cause an electrical shock or fire, or may damage the heater. Page 4 *** Important Notice *** Do not return to place of purchase!! Please contact our Toll Free Hotline: (866) 985-7877 for customer service & warranty issues Assembly & Installation Step 1 Be sure to read and familiarize yourself with the overall assembly and installation instructions in this manual before beginning. It may be helpful to have someone assist you with the installation. This unit is primarily designed for outdoor applications. Tools Required: #2 or #3 Phillips Screwdriver (or standard slotted screwdriver), adjustable wrench, pencil, 5/16” drill bit & drill and a ladder. IR Head Wall Mount with mounting bracket attached Step 2 Find a suitable location to mount the heater unit, be sure to comply with ALL minimunji required distances and clearance specifications. See illustration below, fig. 3. * Do not place any objects such as furniture, papers, clothing or curtains closer than 3 ft to the front and sides of the heater. - Position mounting bracket flush against the wall where you want to position the IR unit. Make sure the bracket is level and mark the centers of the holes with a pencil. Note the proper upright orientation of the bracket, see fig. 1. - Drill 4 pilot holes approx. 1 5/8” deep. For mounting on stucco walls and/or locations where there is not a wood stud, be sure to use appropriate wall anchors to properly secure mounting bracket to wall. -Attach wall bracket using the 4 screws included (and wall anchors if applicable). Apply all 4 screws loosely at first, check that the bracket is level and then tighten securely. Step 3 * Insert wall mount assembly from head unit into wall mount bracket. Se...
Ce manuel est également adapté pour les modèles :électrique - MS-1500 (7.02 mb)
électrique - MS-1500WOIRPH-WM (7.02 mb)