
See ‘Troubleshooting’ on page 7 Water level too low. See ‘Troubleshooting’ on page 7 BEEP Mode 1 cycle (6 hours) Mode 2 cycle (24 hours) Troubleshooting Guide Steriliser will not work Excessive steam escaping from under the lid Sterilising cycle takes too long Flashing lower and side bars, and beep Flashing top and side bars, and beep Check that the mains lead is connected to the steriliser as well as plugged into the mains. Check fuse in plug. Parts incorrectly loaded. Refer to instructions on