Évaluations - 3, GPA: 5 ( )

Fabricant : Superior Taille : 5.95 mb Nom Fichier : Lennox_Superior_SLBV_Care_Operation_506010_02.pdf Langue d'enseignement:

Distribute the pieces over the surface of the burner, as shown in Figures 9 and 10. Do not use more than is necessary. Position the embers on the small holes of the ember bed area. Note: Make sure the glowing ember material does NOT cover the main burner slots. 5. Install the Logs. The logs have locating notches or slots to help ensurethattheyareproperly positioned. The top logs that rest on lower logs, do so over notches, indents or nubs. Proper log placement is critical to prevent sooting. Logs should be placed in the gaps between the flame peaks and should be positioned so they do not impinge the flames. Follow the log placement instructions exactly. SLBV-35 Carefully position the ceramic fiber logs over the burner in the order shown in Figure 9 and per the following instructions: 1. Place the left front log (1) as shown. Position it on the two left front log brackets. 2. Place the right front log (2) as shown. Position it on the two right front log brackets. 3. Place the left rear log (3) as shown. Position it on the upper and lower left rear log brackets. 4. Place the right rear log (4) as shown. Position it on the right rear log bracket. Note that the hole on the bottom of the right rear log rests over the “nub” on the right front log. SLBV-40 Carefully position the ceramic fiber logs over the burner in the order shown in Figure 10 and per the following instructions: 1. Place the ember chunk (1) over the tab on the rear log support as shown. 2. Place the left front log (2) as shown. Position it on the two left front log brackets. 3. Place the right front log (3) as shown. Position it on the two right front log brackets. 4. Place the left rear log (4) as shown. Position it on the left rear log bracket. 5. Place the right rear log (5) as shown. Position it on the right rear log bracket. Note that the hole on the bottom of the right rear log rests over the “Nub” on the right front log. WARNING • DO NOT attempt to install the logs until the appliance installation has been completed, the gas line connected and tested for leaks and the initial burner operation has been checked out. • The size and position of the log set was engineered to give the appliance a safe, reliable and attractive flame pattern. Any attempt to use a different log set in the fireplace will void the warranty and will result in incomplete combustion, sooting, and poor flame quality. • Logs get very hot and will remain hot up to one hour after gas supply is turned off. Handle only when logs are cool. Turn off all electricity to the appliance before you install grate, volcanic stone, embers, and logs. • This appliance is not designed to burn wood. Any attempt to do so could cause irreparable damage to the appliance and prove hazardous to your safety. • If logs are not installed according to the log installation instructions, flame impingement and improper combustion could occur and result in soot and/or excessive production of carbon monoxide (CO), a colorless, odorless, toxic gas. Bag of Glowing Embers (Rockwool) Separate into individual “Quarter-sized” pieces. Figure 8 13 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. SUPERIOR® B-VENTGASFIREPLACES•MODELSSLBV-35,SLBV-40•CARE AND OPERATION INSTRUCTIONSSLBV-35 LOG PLACEMENT INSTRUCTIONS Figure 9 Left Rear Brackets Step 1 Right Rear Bracket Glowing Embers (Do not place Glowing Embers over burner slots.) Step 2 Align hole at the bottom of left front log (1) over the left front brackets and the right front log over the right front brackets. 21 Right Front BracketsLeft Front Brackets Step 4 Align the hole at the bottom of log (4) over the “nub” of log (2) as shown. 4 2 SLBV Firebox Accessories/Parts Cat. No. Model No. Description H7244 — SLBV-35 Log Set Assembly 88L53 FGE Bag of Glowing Embers (Rockwool) 80L42 FDVS Bag of Decorative Volcanic Stone Note: •Ceramic fiber logs are FRAGILE! Handle carefully to prevent breakage. •Install volcanic stone and glowing embers BEFORE installing logs. •To prevent sooting, make sure logs do not cover any burner openings. Step 3 1 Right Front Log "Nub" 2 Position on the left rear log brackets3 Left Rear Log Right Rear Log43 Left Front Log1 Right Front Log2 SUPERIORSUPERIORB-VENT GAS FIREPLACES • MODELS SLBV-35, SLBV-40 • CARE AND OPERATION INSTRUCTIONS SLBV-40 LOG PLACEMENT INSTRUCTIONS Left Rear Log Right Rear Log Ember Chunk Left Front Log Right Front Log 54 2 3 1 Step 3 4 2 Right Front Log "Nub" 3 Position on the left rear log bracket Step 1 Left Rear Bracket Right Rear Bracket Right Front BracketsLeft Front Brackets Place Ember Chunk Here Glowing Embers (Do not place Glowing Embers over burner slots.) Note: • Ceramic fiber logs are FRAGILE! Handle carefully to prevent breakage. • Install volcanic stone and glowing embers BEFORE installing logs. • To prevent sooting, make sure logs do not cover any burner openings. SLBV Firebox Accessories/Parts Cat. No. Model No. Description H7245 — SLBV-40 Log Set Assembly 88L53 FGE Bag of Glowing Embers (Rockwool) 80...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :