Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
29. Do NOT remove ashes or coals until they are completely and fully extinguished. 30. Use heat-resistant gloves or hot pads when contacting handles. 31. Use long, sturdy fireplace tools when adding or moving logs. 32. Do NOT place wood directly into bottom of the outdoor fireplace. Place wood only on the wood grid. 33. Do NOT overload the fireplace. Do not add additional firewood until the fire burns down. NOTICE: If any portion of the bowl, lid or spark guards of this outdoor fireplace are glowing red it is overloaded. 34. Do NOT lean over this outdoor fireplace when lighting or when in use. 35. Do NOT place a hot spark guard or hot fireplace tools onto combustible surfaces such as grass, wooden deck or furniture. 36. Avoid breathing smoke from the fire and avoid getting it into your eyes. 37. This outdoor fireplace should be thoroughly inspected and cleaned on a regular basis. 38. After a period of storage and/or non-use, check for signs of damage and creosote build-up. Do NOT operate until necessary repairs and/or cleanup are executed. 39. Use only Blue Rhino Global Sourcing, LLC factory authorized parts. The use of any part that is NOT factory authorized can be dangerous and will void your warranty. Contact 1.800.762.1142. 40. Deaths, serious injury or damage to property may occur if the above is not followed exactly. Assembly Instructions DO NOT RETURN PRODUCT TO STORE. For assistance call 1.800.762.1142 toll free. Please have your owner’s manual and serial number available for reference. For Easiest Assembly: • To avoid losing any small components or hardware, assemble your product on a hard level surface that does not have cracks or openings. • Clear an area large enough to layout all components and hardware. • When applicable, tighten all hardware connections by hand first. Once the step is completed, go back and fully tighten all hardware. • Follow all steps in order to properly assemble your product. 1 Assemble Legs Ax 3 Bx 3 Cx 3Dx 3 2 Attach Bottom Bowl Ax 3 Bx 3 Cx 3Dx 3 4 Insert Cooking Grid and Attach Lid 3 Insert Wood Grid and Attach Spark Guard Contact 1.800.762.1142 for assistance. Do not return to place of purchase. page no. Operating Instructions WARNING FOR YOUR SAFETYBefore using this outdoor fireplace, make sure you have read, understand and are following all information provided in the Important Safeguards presented on page 2. Failure to follow those instructions can cause death, serious injury or property damage. Lighting 1. Make sure there is only a small amount of ash in the bottom of the bowl. 2. Place a layer of dry kindling or a natural firestarter such as Fatwood™ onto the center of the grate. 3. Place above that a layer of dry seasoned hardwood that is cut to lengths no more than 3/4 the diameter of the bowl. 4. Use a match to light kindling or firestarter. 5. Using a hook and heat resistant gloves, replace spark guard once the kindling or firestarter is lit. Tending the Fire You may need to shift and/or add logs for an ideal experience. Do NOT place a hot spark guard or hot fireplace tools onto combustible surfaces such as grass, wooden deck or furniture. 1. Using a hook and heat resistant gloves, carefully remove spark guard. 2. While using a long handled fireplace tool, shift coals and logs to allow additional airflow. 3. Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an existing fire. 4. Wait until glowing coals have developed before adding any additional wood. If additional wood is required, place wood on top coals. Be careful not to shift ashes. 4. Using a hook and heat resistant gloves, replace spark guard. Extinguishing 1. Allow fire to burn itself out. 2. Do NOT use water to extinguish as this is dangerous and can cause damage to this outdoor fireplace. Cleaning and Care This outdoor fireplace should be cleaned on a regular basis to promote safer experiences and longer product life. Note: After repeated use, a slight discoloration of the finish may occur. Do NOT attempt to clean this outdoor fireplace until the fire is COMPLETELY out. Do NOT use oven cleaner or abrasive cleaners as they will damage this product. Do NOT clean any part of this outdoor fireplace in a self cleaning oven as it may damage the finish. 1. Wipe exterior surfaces with a mild dishwashing detergent or baking soda. 2. For stubborn surfaces use a citrus based degreaser and a nylon scrubbing brush. 3. Rinse clean with water. 4. Remove built-up creosote from components with a chimney cleaning product. Storage Do NOT move or store this outdoor fireplace until the fire is COMPLETELY out. 1. Once the fire is out, coals are cold and outdoor fireplace is cool to the touch, remove ashes and properly dispose. 2. Cover outdoor fireplace with a durable vinyl cover designed to fit this unit. 3. Store assembled in a location away from children and pets. Note: If you do not use a cover, store this outdoor fireplace in a dry location to maximize product life. Product ...