Évaluations - 1, GPA: 5
(
)
)
|
Facilité d'utilisation
Use only Blue Rhino Global Sourcing, Inc factory authorized parts. The use of any part that is NOT factory authorized can be dangerous and will void your warranty. Please use protective gloves when assembling this product. Do not force parts together as this can result in personal injury or damage to the product. Deaths, serious injury or damage to property may occur if the above is not followed exactly. page no. Contact 1.800.762.1142 for assistance. Do not return to place of purchase. Parts List Exploded View 1 2 3 4 5 6 Spark Guard Wood Grate Bottom Bowl Hearth Leg (4) Leg Support 55-05-391 55-05-382 55-05-381 55-05-396 55-05-385 55-05-386 2 3 1 4 6 5 Hardware Tools Required for Assembly (Included) Allen Wrench A Screw M5x10 Black Nickel Plated 4 pcs B Screw M8x12 Black Nickel Plated 8 pcs Lock Washer o8 Black Nickel Plated 8 pcs Tools Required for Assembly (Not Included) #2 Phillips Head Screwdriver Outdoor Fireplace Model No. WAD794SPA Assembly Instructions 1 2 Assemble Base For assistance call 1.800.762.1142 toll free. Please have your owner’s manual and model number available for reference. DO NOT RETURN PRODUCT TO STORE. For Easiest Assembly: • To avoid losing any small components or hardware, assemble your product on a hard level surface that does not have cracks or openings. • Clear an area large enough to layout all components and hardware. • When applicable, tighten all hardware connections by hand first. Once the step is completed go back and fully tighten all hardware. • Follow all steps in order to properly assemble your product. Typical assembly: approximately 30 minutes. x 4 A x 8 B C x 8 3 Insert Bowl 4 Insert Wood Grid page no. Contact 1.800.762.1142 for assistance. Do not return to place of purchase. Operating Instructions 5 Place Spark Guard WARNING: Before using this outdoor fireplace, make sure you have read, understand and are following all information provided in the Important Safeguards presented on page 2. Failure to follow those instructions can cause death, serious injury or property damage. Lighting 1. Make sure there is only a small amount of ash in the bottom of the bowl. 2. Place a layer of dry kindling or a natural firestarter such as Fatwood™ onto the center of the grate. 3. Place above that a layer of dry seasoned hardwood that is cut to lengths no more than 3/4 the diameter of the bowl. 4. Use a match to light kindling or firestarter. 5. Using a hook and heat resistant gloves, replace spark guard once the kindling or firestarter is lit. Tending the Fire You may need to shift and/or add logs for an ideal experience. Do NOT place a hot spark guard or hot fireplace tools onto combustible surfaces such as grass, wooden deck or furniture. 1. Using a hook and heat resistant gloves, carefully remove spark guard. 2. While using a long handled fireplace tool, shift coals and logs to allow additional airflow. 3. Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an existing fire. 4. Wait until glowing coals have developed before adding any additional wood. If additional wood is required, place wood on top coals. Be careful not to shift ashes. 4. Using a hook and heat resistant gloves, replace spark guard. Extinguishing 1. Allow fire to burn itself out. 2. Do NOT use water to extinguish as this is dangerous and can cause damage to this outdoor fireplace. Cleaning and Care Inspecting This outdoor fireplace should be inspected on a regular basis to ensure product safety and longer product life. Do NOT attempt to inspect this outdoor fireplace until the fire is COMPLETELY out. 1. Check handles to make sure they are secure. 2. Check components for any signs of damage or rust. 3. If damage to any component is detected, do NOT operate until repairs are executed. Cleaning This outdoor fireplace should be cleaned on a regular basis to promote safer experiences and longer product life. Note: After repeated use, a slight discoloration of the finish may occur. Do NOT attempt to clean this outdoor fireplace until the fire is COMPLETELY out. Do NOT use oven cleaner or abrasive cleaners as they will damage this product. Do NOT clean any part of this outdoor fireplace in a self cleaning oven as it may damage the finish. 1. Wipe exterior surfaces with a mild dishwashing detergent or baking soda. 2. For stubborn surfaces use a citrus based degreaser and a nylon scrubbing brush. 3. Rinse clean with water. 4. Remove built-up creosote from components with a chimney cleaning product. Storage Do NOT move or store this outdoor fireplace until the fire is COMPLETELY out. 1. Once the fire is out, coals are cold and outdoor fireplace is cool to the touch, remove ashes and properly dispose. 2. Cover outdoor fireplace with a durable vinyl cover designed to fit this unit. 3. Store assembled in a location away from children and pets. Note: If you do not use a cover, store this outdoor fireplace in a dry location to maximize product life. Outdoor Fireplace Model No. WAD794...